Wyniki wyszukiwania - BazTech

Ograniczanie wyników

2 Journal of Ecological Engineering

Znaleziono wyników: 2

Liczba wyników na stronie

Wyniki wyszukiwania

Sortuj według:

Ogranicz wyniki do:

Utilization of Desulfurized Heavy Liquid Fuel Blends in Domestic Boiler

Al Aboushi Ahmad, Abdelhafez Eman, Hamdan Mohammad, Ajib Salman, Alsaqoor Sameh

Journal of Ecological Engineering

2023

Vol. 24, nr 7

225--233

One way to cut down the consumption of diesel fuel in domestic heating in Jordan is to blend it with shale oil, which may be extracted from oil shale. This leads to a cut down in the national fuel bill in Jordan. Unfortunately, shale oil contains significant amounts of sulfur as impurities and upon burning sulfur oxides are emitted causing a negative environmental impact, and hence desulfurization of such fuel blends is essential. This may be achieved by adding activated carbon to the fluids. The process of removing sulfur from shale oil is crucial for safeguarding the environment, human well-being, and equipment, as well as meeting regulatory requirements and creating superior-quality goods. In this study, a domestic boiler was utilized to evaluate the degree of desulfurization process of blends of diesel and shale oil fuels upon their burning in a domestic boiler, to achieve this, blends of both fuels were prepared with varying amounts of shale oil (10%, 20%, 30%, and 40%) and various amounts of activated carbon were added to the prepared mixtures of diesel fuel and shale oil. The assessment of performance included examining the environmental impact, specifically by analyzing exhaust gases to measure the concentration of Sulfur Oxide (SO2). It was found that an increase in the concentration of shale oil in the mixture led to an increase in the concentration of SO2. However, adding more activated carbon to the mixture from the fuels resulted in a decrease in the SO2 concentration. The lowest SO2 concentration was observed when 1g of activated carbon was added per liter of the fuel mixture at a 20% concentration of shale oil, and 0.6g of activated carbon per liter of the fuel mixture at a 40% concentration of oil shale.

Enhancement of Solar Water Disinfection Using Nanocatalysts

Hamdan Mohammad, Al Louzi Razan, Al Aboushi Ahmad, Abdelhafez Eman

Journal of Ecological Engineering

2022

Vol. 23, nr 12

14--20

Solar water disinfection (SODIS) is a simple and low-cost method of increasing water quality. However, it takes about 6 hours of exposure to solar radiation. The elimination of harmful pathogenic germs from drinking water can be accelerated using a combination of sun disinfection and nanotechnology. In this study, a hybrid water purification technique using solar water disinfection, Titanium Oxide (TiO2), and natural mineral clays was investigated. TiO2, natural kaolin clay nanoparticles, and a mixture of TiO2 and natural clay were added to contaminated wastewater containers at different concentrations. After that, the containers were exposed to sun light for different time intervals. Samples were then collected from all tests to measure the total counts of Total Coliform and Escherichia coli (E. coli) using the IDEXX system. The results showed that the addition of TiO2 and natural kaolin clay to wastewater with solar water disinfection reduced the total count of the pathogenic microorganisms and decreased the time needed time for the disinfection process compared to using solar energy alone. The results also showed that the optimum concentration of the TiO2, which yielded the shortest purification time and lowest levels of pathogenic microorganisms, was 0.006 g/ml. In co ntrast, the most effective concentratio n of natural clay was 0.0015 g/ml. Moreover, the results showed that the optimum concentration of the mixture of TiO2 and natural clay, which speeds up the purification time an d lowest the level of pathogen ic microorganisms was 0.006 g/ml for TiO2 and 1.2 g/ml for the natural clay.