Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 8

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
PL
W artykule poruszono wpływ ciekłego azotu w temperaturze -196°C na wybrane właściwości fizyczne kompozytów zbudowanych na bazie żywic winyloestrowych D411 oraz D470. Badania te wykonane zostały pod kątem pózniejszego wykorzystania kompozytu jako jednego z elementów nadprzewodnikowego ogranicznika prądu zwarciowego (NOPZ).
EN
Evaporative water from yeast slurry concentration is acidic, low mineralized and contains large amounts of dissolved organic contaminants. The treatment of evaporative water from yeast slurry concentration by Fenton (Fe(II)/H2O2) and Fenton-like (Fe(III)/H2O2) reactions has been studied. The processes in terms of system variables have been compared: catalyst and oxidant doses, initial pH, temperature of reaction, and the reaction kinetic. For determination of mineralization efficiency the total organic carbon (TOC) in water before and after reactions was measured. The Fenton reaction was more efficient for mineralization of organic compounds: the highest efficiency of TOC removal was 45–50%, while for the Fenton-like it was 20–30%. The pH adjustment of evaporative water in the range of 2–5 did not change the efficiency of treatment. Temperature of 30°C was the most favorable for both reactions. The Lumped Kinetic Model fitted very well the experimental results. The reaction rate analysis indicated that the rate of direct mineralization of organic compounds is similar to the rate of its oxidation to organic intermediates, its selectivity factor was more favorable to the Fenton reaction. The strong correlation between chemical oxygen demand (COD) and TOC in evaporative water after the Fenton and Fenton-like reactions has been determined, providing a simple tool for calculating COD on the basis of values of TOC measurement.
PL
Woda wyparna z zatężania gęstwy drożdżowej jest kwaśna, nisko zmineralizowana i zawiera dużą ilość rozpuszczonych związków organicznych. W pracy badano oczyszczanie wody wyparnej w reakcji Fentona (Fe(II)/H2O2) i pokrewnej (Fe(III)/H2O2). Porównywano procesy przy następujących zmiennych: dawki katalizatorów i utleniacza, pH początkowe, temperatura i kinetyka reakcji. Efektywność oceniano poprzez pomiar ogólnego węgla organicznego przed i po reakcji. Związki organiczne były bardziej skutecznie mineralizowane w reakcji Fentona: najwyższa efektywność usuwania OWO wynosiła 45–50%, a w reakcji pokrewnej jedynie 20–30%. Korekta odczynu wody wyparnej w zakresie 2–5 pH nie wpłynęła na efektywność oczyszczania. Temperatura 30°C była najbardziej korzystna dla obydwu reakcji. Model kinetyczny o parametrach skupionych bardzo dobrze opisywał wyniki badań eksperymentalnych. Analiza szybkości reakcji wykazała, że jest ona zbliżona w przypadku mineralizacji organicznych składników oraz utleniania do produktów pośrednich, a współczynnik selektywności reakcji był korzystniejszy dla procesu Fentona. Określono silną korelację pomiędzy parametrami ChZT i OWO w wodzie po reakcji Fentona i pokrewnej, co może być przydatnym do obliczania ChZT na podstawie pomiaru OWO.
3
Content available remote Sorption properties of fly ash from brown coal burning towards arsenic removal
EN
In the present work, the sorptive capacity of fly ash from the combustion of brown coal in relation to arsenic(III) removal from the standard solution as well as the potential application of fly ash in actual wastewater purification have been evaluated.
PL
W tym artykule zbadano pojemność sorpcyjną popiołów lotnych powstających podczas spalania węgla brunatnego w stosunku do arsenu(III) usuwanego z roztworu standardowego oraz zbadano możliwość zastosowania popiołów w oczyszczaniu ścieku rzeczywistego.
4
PL
Celem niniejszej pracy było zbadanie zdolności sorpcyjnych popiołu po spalaniu węgla brunatnego pod kątem adsorpcji arsenu (III). Uzyskane wyniki wskazują na znaczną pojemność sorpcyjną popiołu lotnego względem As(III) (33 mg/g), porównywalną do otrzymywanej na żywicach jonowymiennych. Dane doświadczalne dobrze opisuje izoterma Langmuira, a proces adsorpcji kontrolowany jest reakcją chemiczną pseudo drugiego rzędu (model PSO).
EN
The aim of work was to examine sorption of As(III) species, using fly ash from lignite burning. The results obtained show that the sorption capacity of fly ash (33 mg/g) is comparable to commercial sorbent. Experimental data can be described by means ofLangmuir isotherm. Adsorption process obeys the pseudo-second order (PSO) kinetics.
EN
The scope of this contribution was to investigate in detail an application of fly ash adsorbent for the removal of arsenite ions from a dilute solution. The experiments have been carried out using fly ash from black coal burning power plant "Siersza" and brown coal burning power plant "Turów" (Poland), which was wetted, then mixed and tumbled in the granulator with a small amount of cement to increase the mechanical strength of agglomerates. The measurements of arsenic adsorption from the aqueous solution were carried out in the flask (with shaking), as well as in the column (with circulation), in order to compare two different methods of contacting waste with adsorbent. The adsorption isotherms of arsenic were determined for granulated material, using the Freundlich model. Kinetics studies indicated that the sorption follows a pseudo-first-order (PFO) model (Lagergren) and the Elovich-type model.
EN
In the defunct Gorka heading there is both a waste disposal site with an area of 6.7 ha containing approximately 600 000 m5 of waste generated in the course of aluminum oxide production and a pond with an area of 3 ha and depth of up to 15 m containing about 400 000 m3 of effluent (lcachatc water). The reservoir is filled with infiltrates flowing in from the above-mentioned disposal site at a rate ~ 130 mVday. The subsidence of the pond bottom and infiltration of solutions into the Triassic and Jurassic water resources, estimated at ~ 40 mVday, is a cause of serious concern. The basic problem of the effluents in the Gorka pond is their high alkalinity (pH 12-14) and variable pollutant content, the level of which increases with the pond's depth. The proposed solution involves pumping out and treating about 500 000 m3 of effluents retained in the Gorka reservoir. The effluents would be treated in a reverse osmosis plant using a process which has so far been verified on a quarter-commercial scale. The treatment process by-product would be discharged into the Ropa stream. The brine solution (containing ~ 25% NaCl), would be solidified. The next stage after pumping would be the utilization of approximately 50 000 m3 of bottom slurry. Highly alkaline slurries would be utilized in the production of self-solidifying mixtures. These mixtures would be used to seal the bottom of the Gorka reservoir and part of the edges of the defunct quarry, according to requirements. The next stage would involve outcropping the feed-water sources located in the northern section of the old heading to reconstruct the original flow system from the sources to the Ropa River. The excavated solid waste would be relocated into the remainder of the disposal site containing solid aluminium waste. The surface of the site would be scaled and then reclaimed. The final stage involves macrolcvclling of the site into an amphitheatre system, outcropping the fertile soil layer, constructing a lake and streams, and finally land reclamation of the whole site.
PL
Na terenie byłego kamieniołomu "Górka" znajduje się składowisko o powierzchni 6,7 ha oraz staw o powierzchni około 3 ha. Wyrobisko"Górka" wypełniony jest odpadami stałymi z produkcji tlenku glinu, w ilości około 600 0000 m\ które zgromadzono na zwałowisku zlokalizowanym w północnej części wyrobiska i alkalicznymi odciekami (430 000 m3), które tworzą akwen wypełniający południową część wyrobiska oraz nasycają zwał odpadów stałych. Na dnie akwenu zalega ponadto około 57 000 m3 szlamów alkalicznych. Do zbiornika dopływa około 130 m'/dobe zanieczyszczonych wód. W większości są to infiltraty ze wspomnianego składowiska odpadów. Podstawowym problemem ścieków zawartych w stawie "Górka" jest ich wysoka alkaliczność (pH 12-14). Niepokojące jest też przesiąkanie ścieków przez dno zbiornika i ich infiltracja do podziemnych zbiorników wód jurajskich i triasowych. Ilość tych infiltratów jest szacowana na 40 mVdobe. W pracy przedstawiono kompleksową propozycję rozwiązania problemu składowiska odpadów wyrobiska "Górka" podstawę, której stanowi wypompowanie 50 000 m3 ścieków ze zbiornika i oczyszczenie ich metodą odwróconej osmozy, która została sprawdzona w skali ćwierć technicznej. Oczyszczone do jakości wód V klasy ścieki zrzucane będą do rzeczki Ropa. Koncentrat solankowy natomiast będzie zestalony i zdeponowany na składowisku zewnętrznym. Drugi etap przewiduje usunięcie i przetworzenie w formę produktu betonopodobne-go szlamów nagromadzonych na dnie osadnika; produkt ten będzie na miejscu wykorzystany przy rekultywacji terenu, do uszczelnienia powierzchni składowiska odpadów wysokoglinowych. Następny etap to odsłonięcie źródeł w północnej części dawnego wyrobiska kamieniołomu celem odtworzenia pierwotnego reżimu odpływu od źródeł do sztolni. Wydobywane odpady zostaną przemieszczone na pozostałą część składowiska odpadów wysokoglinowych, którego powierzchnia zostanie uszczelniona i następnie zrekultywowana. Ostatni etap to makroniwelacja terenu (w układzie amfiteatralnym), z odtworzeniem warstwy ziemi urodzajnej i urządzeniem oczka wodnego oraz finalna rekultywację terenu.
EN
In this paper the results of the investigation on alkaline wastewater treatment have been presented. The wastewater derived from the ,,Górka" reservoir, which is located in the post-mining excavation in the southern part of Trzebinia city. The extremely high pH value, high mineralization (salinity) and the presence of organic compounds, some trace elements and also heavy metals, whose concentrations are multiple more than natural geochemical background, characterise the wastewater. The reverse osmosis method was proposed for their treatment. Attempts in the quarter-commercial scale of the production were performed. On the basis of their results the process optimisation, choosing the membrane type and the process conditions was conducted. The application of the osmotic membrane SG2540PLUSCHT at 288 K and pressure 6 MPa, using the concentrated technically pure HC1 as a neutralization agent enables obtaining about 75% recovery. It permits wastewater treatment to the level corresponding with class IV of water quality. The wastewater treatment is the first as well as the main stage of the excavation reclamation project allowing its succeeding stages realization.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.