Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 7

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
EN
The mixed convection phenomenon plays a very important role in the Czochralski crystal growth due to its essential influence on the heat and mass transport processes. This paper presents the experimental analysis of the natural and mixed convection in the case of a single crystal growth system by the Czochralski method. The influence of such parameters like: temperature difference, rotation of speed of the crystal and the crucible and also aspect ratios were examined. To simulate a configuration of the Czochralski method a glass cylindrical crucible was immersed in a cubic aquarium filled with water. The copper cylinder simulating the crystal (crystal dummy) was attached to the surface of working fluid. Two constant temperature baths were used to control the level of temperature difference between the crucible walls and the crystal dummy. The crucible and the crystal were rotated by the system of engines. Their movement was continuously controlled. Two main methods were applied to investigate the temperature and velocity fields - DPIT and DPIV. The liquid crystal slurry was used as the tracers in both methods. The results are presented in the from of colour temperature maps and vector velocity fields.
2
Content available Flow patterns generated by a strong magnetic field
EN
The influence of a strong magnetic field on a paramagnetic fluid in a cylindrical enclosure of thermosyphon-like geometry was studied. A variety of spoke patterns was experimentally obtained and recorded. The analysis led to some data about the temperature field and, indirectly, about the flow structure. The results related to the heat transfer rate confirmed the conclusions coming from the flow visualization.
PL
Przedstawione zostały badania dotyczące struktury przepływu w geometrii cylindrycznej typu odwrócony termosyfon (tzn. górna część cylindra była grzana, a dolna chłodzona). Naczynie eksperymentalne napełnione cieczą paramagnetyczną zostało umieszczone w przestrzeni badawczej magnesu nadprzewodzącego, generującego silne pole magnetyczne (maksymalna indukcja magnetyczna 5 Tesli). Badano wpływ pola magnetycznego na strukturę przepływu, dokonano wizualizacji pola temperatury przy pomocy ciekłych kryształów oraz pomiaru temperatury za pomocą termopar. Bez pola magnetycznego oraz dla indukcji magnetycznej poniżej 1 Tesli w naczyniu nie obserwowano ruchu konwekcyjnego, a co za tym idzie również żadnej struktury przepływu. Dla indukcji magnetycznej powyżej 1 Tesli w naczyniu eksperymentalnym została zapoczątkowana konwekcja magnetyczna, co objawiło się pojawieniem struktury szprychowej. Struktura szprychowa, typowa dla konwekcji naturalnej w termosyfonie (tzn. górna część cylindra chłodzona, a dolna grzana) uległa zmianie - wraz ze wzrostem indukcji magnetycznej wzrastała liczba płatków, co sugerowało intensyfikację konwekcji. Wyniki wizualizacji zostały potwierdzone przez pomiary termiczne oraz wyznaczoną liczbę Nusselta.
3
Content available Experimental investigations of jet flows
EN
The paper describes two kinds of jet flows: the confined and impinging jet flow. A triaxial thermoanemometer probe with a temperature sensor was used to study the confined jet flow. The time-average analysis of data resulted in a turbulence characteristic. It allowed the estimation of the budget of tur bule nt heat flux. The impinging jet flow was investigated by the Particle Image Velocimetry (PIV) method together with heat transfer analysis done with a liquid erystal film.
PL
Zaprezentowane zostały badania eksperymentalne dotyczące dwóch rodzajów przepływów strumieniowych: strugi pierścieniowej oraz strugi uderzającej. Czterowłóknowa sonda termoanemometryczna wykorzystana została w badaniach związanych ze strugą pierścieniową. Analiza danych pozwoliła na wyznaczenie wielkości charakteryzujących przepływ turbulentny, ze szczególnym uwzględnieniem bilansu turbulentnego strumienia ciepła. W badaniach strugi uderzającej pod działaniem przepływu krzyżowego do wyznaczenia pola prędkości wykorzystano metodę PIV (ang. Particle Image Velocimetry). Badaniom przepływu towarzyszyła analiza wymiany ciepła przy użyciu termoczułych ciekłych kryształów w postaci cienkiego filmu. Zaobserwowane zostały wiry, które w głównej mierze odpowiadały za intensyfikację wymiany ciepła, co zostało potwierdzone wyznaczonymi polami prędkości.
EN
Flow instabilities in the thermosiphon-like enclosure caused by the gravitational and magnetic fields are presented. The cylindrical enclosure was partially heated, partially cooled and filled with paramagnetic fluid. The influence of strong magnetic field on the convective motion in the presented geometry was studied. The temperature field (correlated with the fluid flow) was visualized in the cross-section between the heated and cooled parts of cylinder. Depending on the interaction between the gravitational buoyancy and magnetizing forces, the convective fluid motion was enhanced or induced.
PL
Przedstawiono wyniki badań eksperymentalnych pola temperatury w przypadku konwekcji magnetycznej, w naczyniu cylindrycznym stanowiącym model jednofazowego termosyfonu. Naczynie wypełnione cieczą paramagnetyczną było częściowo ogrzewane, częściowo zaś chłodzone. W celu wizualizacji pola temperatury do cieczy eksperymentalnej dodawano termoczułe ciekłe kryształy w przekroju znajdującym się pomiędzy częścią ogrzewaną a chłodzoną. Badano wpływ pola magnetycznego na pole temperatury, a pośrednio także na strukturę przepływu. W zależności od stosunku siły grawitacyjnej do siły magnetycznej konwekcja magnetyczna w systemie była wzmacniana lub indukowana.
PL
W prezentowanej pracy dokonano wizualizacji pola temperatury w obszarze konwekcji mieszanej. Przedstawiono stanowisko pomiarowe, warunki eksperymentu oraz metody badawcze wykorzystane podczas wizualizacji pola temperatury. Dokonano analizy wyników wizualizacji pola temperatury i porównano je z wynikami dotyczącymi pola prędkości.
EN
The visualisation of a temperature field in mixed convection by using the termochromic liquid crystals is presented in this paper. The experimental set-up, experimental conditions and applied methods were described. The images of temperature field were analised and compared to the results of velocity field.
PL
W pracy zaprezentowano wyniki badań wpływu strug uderzających pod działaniem przepływu krzyżowego na wymianę ciepła oraz oddziaływania między strugami. Temperatura powierzchni ścianki, na którą oddziaływały strugi, była mierzona za pomocą cienkiej warstwy ciekłego kryształu. Kolorowe zdjęcia powierzchni ciekłego kryształu zostały jakościowo i ilościowo przetworzone w celu uzyskania rozkładu liczby Nusselta na powierzchni ścianki. Dokonano również wizualizacji struktury przepływu za pomocą barwnika fluorescencyjnego dodanego do przepływającego przez dysze medium oraz światła lasera.
EN
Visualization of heat transfer enhancement regions and flow structure were made for a pair of jets obliquely discharged into a crossflow. The examination of interaction between the two oblique jets were provided. The temperatures of the target surface were visualized with thermochromic liquid crystal sheets. The colors of the liquid crystal images taken by a CCD camera were transformed accurately and effectively into the temperatures by means of the neural network. Fluorescent dyes were added to the jets' fluid to visualize the cross-sectional flow patterns with the light sheet of a laser.
EN
Visualization of heat transfer enhancement regions was made for a pair of jets obliquely discharged into a crossflow. The examination of interaction between the two oblique jets and the comparision of different flow patterns caused by the vertically and obliquely issued jets were provided. The temperatures of the target surface were visualized with thermochromic liquid crystal sheets. The colours of the liquid crystal image taken by a CCD camera were transformed accurately and effectively into the temperatures by meas of the neural network technique to obtain Nusselt number distributions on the target surface. Fluorescent dyes were added to the jet fluid to visualize the cross--sectional flow patterns with the light sheet of a laser. The moist important parameter used in the present study was the velocity ratio V R of the jet to the crossflow besides the crossflow Reynolds number.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.