Wyniki wyszukiwania - BazTech

1

Preparation of Polypyrrole/Silver Conductive Polyester Fabric by UV Exposure

Wang Xiaofei, Wan Ailan, Jiang Gaoming, Raji Rafiu King, Yu Dongzheng

Autex Research Journal

|

2021

|

Vol. 21, no. 2

231--237

EN

In this study, polypyrrole/silver (PPy/Ag) conductive polyester fabric was synthesized via an in-situ polymerization method under UV exposure, using silver nitrate (AgNO3) as an oxidizing agent in the presence of sodium dodecyl benzene sulfonate (SDBS) and polyvinylpyrrolidone (PVP). The effect of the preparation processes on the properties of the conductive fabric was studied experimentally, and the optimal preparation process of the conductive fabric was obtained. X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FTIR) showed the chemical structural properties of the PPy/Ag conductive polyester fabric. X-ray diffraction (XRD) confirmed the presence of silver nanoparticles in the prepared material. Furthermore, subsequent test results proved that the PPy/Ag conductive polyester fabric prepared by UV irradiation had good electrical conductivity and antibacterial property. The sheet resistance of the prepared conductive fabric was 61.54 Ω • sq−1.

2

Review of Printed Fabric Pattern Segmentation Analysis and Application

Kumah Charles, Raji Rafiu King, Pan Ruru

Autex Research Journal

|

2020

|

Vol. 20, no. 4

530--538

EN

Image processing of digital images is one of the essential categories of image transformation in the theory and practice of digital pattern analysis and computer vision. Automated pattern recognition systems are much needed in the textile industry more importantly when the quality control of products is a significant problem. The printed fabric pattern segmentation procedure is carried out since human interaction proves to be unsatisfactory and costly. Hence, to reduce the cost and wastage of time, automatic segmentation and pattern recognition are required. Several robust and efficient segmentation algorithms are established for pattern recognition. In this paper, different automated methods are presented to segregate printed patterns from textiles fabric. This has become necessary because quality product devoid of any disturbances is the ultimate aim of the textile printing industry.

3

Three-Dimensional Deformation of Warp-Knitted Spacer Fabrics Under Tensile Loading

Sun Wan, Miao Xuhong, Raji Rafiu King, Ma Pibo

Autex Research Journal

|

2019

|

Vol. 19, no. 4

381--386

EN

This paper puts forward a new method for measuring the three-dimensional deformation of warp-knitted spacer fabrics under tensile stress. The three-dimensional deformation mechanisms of warp-knitted spacer fabrics have been analyzed using stress–strain curves. Poisson’s ratio of the three-dimensional deformation has also been analyzed. The stress–strain curves obtained for tests in the warp-ward direction and weft-ward direction show a characteristic initial large deformation, followed by minimal-to-no deformation. The stress–strain curves obtained for tests in the thickness direction exhibit different characteristics due to the differences in stretch directions. In the weft-ward direction, the curve shows an approximate linear change with minimal strain. In the warp-wise direction, the curve shows a large stress with small strain, and subsequently, a small stress yielded a large strain. During the stretching process, the surface deformation perpendicular to the direction of tensile force is greater than the tensile deformation, and the deformation in the thickness direction is also minimal compared to that in the direction of the tensile deformation.