Ograniczanie wyników
Czasopisma help
Autorzy help
Lata help
Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 195

Liczba wyników na stronie
first rewind previous Strona / 10 next fast forward last
Wyniki wyszukiwania
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 10 next fast forward last
PL
Stan techniczny, zwłaszcza dyspozycyjność, urządzeń długo eksploatowanych, pracujących w trybie regulacyjnym, w największym stopniu zależy od warunków eksploatacji oraz poziomu utrzymania technicznego. Odpowiednio wykonywana diagnostyka jest podstawowym źródłem informacji o aktualnym stanie technicznym urządzeń. Skojarzenie wyników badań wykonywanych w remontach planowych, awaryjnych oraz warunków eksploatacji to źródło informacji do planowania zakresów diagnostyki, remontów oraz nakładów na utrzymanie stanu technicznego. Największe korzyści można osiągnąć oceniając synchronicznie z warunkami eksploatacji stan techniczny dużej liczby urządzeń tej samej klasy. Maksymalny profit można osiągnąć odpowiednio integrując informacje jw. w sakli KSE. W tym celu opracowano standardy badania, systemy zdalnej diagnostyki oraz portal internetowy integrujący informacje, wiedzę i doświadczenia. To najbardziej efektywne podejście do zapewnienia bezpieczeństwa eksploatacji, wysokiej dyspozycyjności oraz optymalizacji nakładów na utrzymanie stanu technicznego.
EN
Technical condition, especially the availability of long time operated equipment, working in the cycle load, depends to a great extent on the operating conditions and quality of technical maintenance. Properly performed diagnostics is a basic source of information on the current state of the equipment. The association of the results of the inspection carried out in the planned or forced overhaul and operating conditions is a source of information for the planning of diagnostics, overhauls and financial outlays for maintenance of technical condition. The greatest benefits can be achieved by assessing the technical condition of a large number of devices of the same class synchronously with the operating conditions. Maximum profit can be achieved by integrating appropriate information as in above mentioned the National Energy System scale. For this purpose we have developed test standards, remote diagnostics systems and an internet portal that integrates information, knowledge and experience. This is the most effective approach to ensure operational safety, high availability, as well as optimization of maintenance costs.
PL
W artykule przedstawiono wyniki badań porównujących modelowanie fizyczne oraz modelowanie numeryczne. Do realizacji badań wytypowano proces walcowania kątownika równoramiennego. Badania numeryczne przeprowadzono metodą elementów skończonych z użyciem oprogramowania DEFORM-3D, a w modelowaniu fizycznym wykorzystano możliwości druku 3D do wykonania walców. Przeprowadzone badania potwierdzają zgodność pomiędzy przyjętymi metodami modelowania. Ponadto potwierdzono, że materiał modelowy jakim jest kopolimer akrylonitrylo-butadieno-styrenowy (ABS) może być wykorzystany na narzędzia do walcowania ołowiu w gatunku Pb1.
EN
The article presents the results of research comparing physical modelling and numerical modelling. A rolling process of an angle bar was selected for the implementation of the tests. Numerical research was performed using the finite element method with the use of DEFORM-3D software. In physical modelling the possibilities of 3D printing for making rolls were used. The conducted research confirms the compatibility between the adopted modelling methods. Moreover, it was confirmed that the material which is ABS can be used for tools for rolling Pb1 lead.
PL
Znaczne podobieństwo konstrukcji, warunków eksploatacji oraz stanu technicznego bloków klasy 200 MW sprawiło, że w Pro Novum opracowano narzędzie, które – najlepiej spośród znanych na rynku systemów diagnostycznych – nadaje się do zapewnienia niskonakładowego bezpieczeństwa i wysokiej dyspozycyjności tej najważniejszej w KSE, także w dającej się przewidzieć przyszłości, klasy bloków energetycznych. Portal Bloki PRO® integruje wszystkich użytkowników bloków klasy 200 MW. Portal stanowi logiczną kontynuację projektu LM System PRO+® ver. 4.0, jest ciągle rozwijany, aktualnie powstaje jego ver. 2.0. W artykule przedstawiono m.in. korzyści, jakie będzie można osiągnąć korzystając z jego obecnych i przyszłych możliwości.
EN
Significant similarity of construction, operating conditions (still) and technical condition of power units 200 MW class made as develop the tool, which suits best among known on the market diagnostic systems to assure low-cost safety and high availability of this class of power units, the most important class in National Power System now and in foreseeable future. Portal Bloki PRO® integrates all users of power units 200 MW class. Portal is a logical continuation of our project LM System PRO+® ver. 4.0, is constantly being developed and its ver. 2.0 is currently being created. The paper will present among others the benefits to be achieved when using its current and future capabilities.
EN
Mass movements are an ever present threat to building construction, water management, vegetation formation and biodiversity. This paper presents an approach to landslides research based on non-invasive geoelectrical method - Electrical Resistivity Tomography (ERT). Mapping and displacement monitoring of unstable slopes is crucial for the hazards prevention and assessment. The ERT technique is an effective tool to obtain structural differentiation of geological medium through interpretation of 2D electrical resistivity models. The main advantage of the method is a wide range of applicability what makes its useful during field works on a landslide. It is commonly used for measurements of slope instability, determination of shear surface, landslide susceptibility, depth of bedrock, slip plane geometry. The aim of the work is to identify the geological structures underneath three selected landslides in south Poland: in Racibórz, Milówka and Porąbka. Attempts have been focused on determination of the usefulness of the proposed ERT methodology for evaluation of possible further development of mass movements. On two investigation sites two different arrays have been used: Wenner-Schlumberger and dipole-dipole which allowed to prepare combined data set and resistivity models based on them. Forward modelling of synthetic models based on a priori information allowed to understand anomalies present on resistivity models. Applied approach ensured quality increase of final interpretation of resistivity models.
5
Content available remote Wyniki badania betonu z obudowy reaktora jądrowego EWA
PL
W pracy przedstawiono badania betonowej obudowy doświadczalnego reaktora jądrowego EWA po procesie starzenia, a także napromienienia podczas jego eksploatacji od roku 1958. Oszacowano, że do 24 lutego 1995 roku reaktor eksploatowano 107400 h pod obciążeniem 10 MW, po uwzględnieniu przerw technologicznych i mniejszej mocy reaktora w początkowych latach. W celu pobrania próbek betonowej obudowy odwiercono 7 rdzeni, przy czym oprócz walców o różnej długości i o średnicach 100 i 80 mm uzyskano nieregularne kawałki złomu betonowego. Próbki odwiercone powyżej kanału poziomego miały gęstość 2,4 g/cm3, natomiast poniżej tego kanału, gdzie w betonie stwierdzono więcej stalowych kęsów, gęstość betonu wynosiła średnio 3,1 g/cm3. W próbkach pobranych nad i pod kanałem, wytrzymałość betonu wynosiła odpowiednio 30,6 MPa i 28,2 MPa. Kruszywo grube stanowiła ruda żelaza: goethyt łamany (limonit), o max. wymiarze ziaren do 29 mm; procentowa zawartość grubych ziaren wynosiła od 25 do 35%. Kruszywem drobnym była zarówno ruda żelaza [głównie goethyt] jak i piasek kwarcowy do 2 mm. Ponadto w betonie znajdowały się kawałki stali o różnych kształtach, ich zawartość wynosiła około 25%. Próbki betonu miały dużą porowatość dostępną dla wody, znacznie przekraczającą 16%, natomiast porowatość otwarta wynosiła od 24,5% do 30,7%. Pomimo zauważonych spękań ziaren kruszywa, wyniki badań nie pozwalają na stwierdzenie wpływu napromienienia w badanej warstwie obudowy reaktora.
EN
This paper is presenting the study of the concrete shielding of EWA research nuclear reactor which was after the ageing process and also under radiation during the reactor exploitation from 1958 year. According to the assessment the reactor was in exploitation till 24 February 1995 during 107400 h under the load of 10 MW, after taking into account the technological breaks and that in the begging years the reactor power was lower. For sampling of the concrete shielding the 7 cores were drilled in, wherein except rollers of different length and of diameters of 100 and 80 mm, the irregular pieces and concrete rubble were obtained. The specimens drilled out over the horizontal channel had the density of 2.4 g/cm3 and under this channel, where in concrete were more steel pieces, the density was 3.1 g/cm3. The compressive strength of concrete samples drilled out over and under the channel was 30.6 MPa and 28.2 MPa respectively. The coarse aggregate was iron ore: crushed goethite with the grains up to 29 mm; the content of this aggregate was from 25% to 35%. The goethite and quartz sand grains under 2 mm was fine aggregate. The concrete samples had high open porosity in the range from 24.5% to 30.7%. Despite of numerous found cracks of aggregate grains the research results did not give the possibility to establish the radiation influence in the examined layer of concrete shielding.
PL
W artykule przedstawiono nowe wymagania, dotyczące badań i oceny bezpieczeństwa użytkowania drabin, ujęte w PN-EN 131-2+A2.2017-02. Wymagania te odnoszą się do dwóch wyodrębnionych kategorii drabin: profesjonalnych i nieprofesjonalnych; obejmują także dodatkowe, cykliczne badania zmęczeniowe. Nowe badania drabin są realizowane w warunkach zbliżonych do występujących podczas użytkowania na stanowisku pracy. W artykule zwrócono uwagę na zgodność zmian z istniejącym w niektórych krajach podziałem tych urządzeń na kategorie wynikające z zakresu i intensywności ich stosowania. Omówiono szczegółowo nowe wymagania dotyczące badań. Zwrócono uwagę na zróżnicowanie sprzedawanych na rynku drabin, podkreślając istotną rolę sprzedawców - powinni oni udzielać wyczerpujących informacji firmom oraz osobom prywatnym na temat norm europejskich i danych technicznych sprzedawanych drabin.
EN
This article presents new safety requirements for ladders m standard PN-EN 131-2+A2.2017-02. They cover two categories of ladders-professional and non-professional ones-and additional cyclic fatigue tests. New ladder tests are carried out under conditions similar to those at workstations where they are used. This article discusses the compatibility of those changes with a division of those devices into categories resulting from differences in the extent and intensity of their use. It also discusses m detail new requirements for tests, and the diversity of ladders on the market. Sales persons are important as they should provide comprehensive. Information to companies or individuals about European standards and technical specifications of ladders.
PL
W niniejszym artykule autorzy posłużyli się wybranymi narzędziami i technikami Lean Management w celu skrócenia cyklu produkcyjnego wytypowanego systemu oświetlenia awaryjnego, wytwarzanego w badanym przedsiębiorstwie produkcyjnym. Przeprowadzone badania obejmowały analizy przepływu materiału z wykorzystaniem diagramu spaghetti, obserwację czasu roboczego w oparciu o metodę chronometrażową oraz modyfikację stanowisk pracy z wykorzystaniem techniki 5S. Opisane przez autorów rozwiązania techniczne i organizacyjne przyczyniły się do skrócenia analizowanego cyklu produkcyjnego.
EN
In this paper the authors used selected tools and techniques of Lean Management to shorten the production cycle of the selected emergency lighting system. The study included material flow analysis using a spaghetti diagram, working time observation based on the timing method and modification of workstations using the 5S technique. The technical and organizational solutions described by the authors contributed to shortening the analyzed production cycle.
PL
Stale wzrasta liczba użytkowników elektrowni wiatrowych i słonecznych w Polsce narażonych na zagrożenia zwłaszcza mechaniczne i elektryczne występujące przy obsłudze tych obiektów. Przeprowadzone analizy wykazały, że podczas użytkowania elektrowni występują nieprawidłowości dotyczące zwłaszcza dojść do stanowisk pracy i dróg ewakuacyjnych, środków ochrony indywidualnej, wydawania pisemnych poleceń, a także opracowania instrukcji i wykonywania prac. Ich skutkiem są różnego typu groźne awarie i wypadki przy pracy. W artykule omówiono wybrane zasady bezpieczeństwa postępowania podczas typowych prac w tych obiektach. Zwrócono uwagę, że do obsługi i użytkowania tych obiektów wymagani są wysoko wykwalifikowani i odpowiednio przeszkoleni pracownicy. Powinni oni przejść specjalistyczne badania lekarskie i być wyposażeni w specjalistyczny sprzęt oraz wyposażenie ochronne. Autorzy liczą, że przedstawione w artykule wskazania wspomogą dobór środków prewencji w celu poprawy bezpieczeństwa pracy w elektrowniach wiatrowych i słonecznych.
EN
The number of users of wind and solar power stations in Poland, who are exposed to especially mechanical and electrical hazards at the service of these objects still increases. The performed analysis showed that during the use of these power stations appear faultinesses especially concerning accessions to workplaces and evacuation ways, personal protective equipment, issuing of orders in writing and also elaboration of instructions and job processing. Different type severe damages and employment injuries are present thereby. In the article one talked over chosen safety rules during typical jobs in these objects. Attention has been paid that high qualified and properly trained operators are required to use of these objects. They should pass special medical examinations and be equipped with professional tools and protective equipment. Authors hope that advices presented in the article will help the selection of preventives for the purpose of work safety improvement in wind and solar power stations.
PL
Przedstawiono zagadnienia projektowania składu betonu do wykonania konstrukcji osłonowych w elektrowni jądrowej, narażonych na oddziaływanie promieniowania jonizującego. Omówiono zasady doboru kruszyw mineralnych o odpowiednich właściwościach, cementów specjalnych oraz domieszek. Przedstawiono przykładowe wyniki oceny mikrostruktury zaprojektowanego betonu, badań przepuszczalności cieczy i gazów, właściwości termofizycznych oraz odporności na wystąpienie szkodliwej reakcji alkalicznej. Zaproponowano wskazówki technologiczne do wykonania betonu, w celu zapewnienia wymaganej trwałości konstrukcji.
EN
The problem of concrete mix design for the construction of radiation shielding structures exposed to ionizing radiation in nuclear power plants is presented. The principles of selection of mineral aggregates with suitable properties, special cements and admixtures are discussed. Exemplary results of microstructure evaluation of designed concrete, liquid and gas permeability tests, thermophysical properties and resistance to harmful alkali-silica reaction are presented. Technological guidance for concrete proportioning and production is proposed to ensure the required durability of the structure.
EN
This research is focused on a small kettle hole located within the Morąg moraines (Iława Lake District, NE Poland). The study objective was to determine the impact of palaeoenvironmental changes in sedimentation and properties of sediments filling the bottom of the kettle hole. Sedimentological, geochemical, and palaeobotanical studies enabled us to distinguish several development phases of the kettle hole, and cluster analysis performed on physicochemical data yielded seven local geochemical zones (JuI/I to JuI/VII). The beginning of biogenic sedimentation in the conditions of a small water body, functioning in the Late Glacial period (4.20–4.10 m), was determined on the basis of palaeobotanical research. Sediments deposited in the lake during its further evolution were rich in microelements such as Ca, Na, Mg, and K, and to a smaller extent – Fe and Mn (JuI/I–III local geochemical zones). The Late Glacial lacustrine period ended with the accumulation of very silty, pollen-free gyttja, with a stratigraphic hiatus (JuI/IV, 3.40–3.20 m). The sediments were enriched with SiO2ter, which indicates an increased rate of slope erosion, and concretions of Fe-Mn occurring below this layer (JuIII) provide evidence for lowering of the water level and even desiccation. In the Holocene, the lacustrine period ended with the accumulation of coarse detrital gyttja (3.20–2.60 m). Palaeobotanical data indicate that the next group of sediments were deposited in the Late Subboreal and Subatlantic periods (2.60–0.0 cm, JuI/V–VII; sedge peat). Their properties were varied and related to hydrologic conditions, limited denudation, and vegetation succession. There was also a significant change in the trophic conditions of the water and consequently in the sediments of the kettle hole, which changed during the lacustrine period from basic to acid, and strongly acid in the surface layer. This reaction may be related to a change in the water regime as well as to human impact in the environment, which led to the colonization of the peat bog by Sphagnum moss.
PL
Stan techniczny, zwłaszcza dyspozycyjność, urządzeń długo eksploatowanych, pracujących w trybie regulacyjnym, w największym stopniu zależy od warunków eksploatacji oraz poziomu utrzymania technicznego. Odpowiednio wykonywana diagnostyka jest podstawowym źródłem informacji o aktualnym stanie technicznym urządzeń. Skojarzenie wyników badań wykonywanych w remontach planowych, awaryjnych oraz warunków eksploatacji to źródło informacji do planowania zakresów diagnostyki, remontów oraz nakładów. Największe korzyści można osiągnąć badając nie tylko poszczególne urządzenia, a nawet podobne konstrukcyjnie urządzenia w jednej elektrowni czy grupie elektrowni. Maksymalny profit można osiągnąć odpowiednio integrując informacje jw. w sakli KSE. W tym celu opracowano standardy badania, systemy zdalnej diagnostyki oraz portal internetowy integrujący informacje, wiedzę i doświadczenia. To najbardziej efektywne podejście do zapewnienia bezpieczeństwa eksploatacji, wysokiej dyspozycyjności oraz optymalizacji nakładów na utrzymanie stanu technicznego.
EN
Technical condition, especially the availability of long time operated equipment, working in the cycle load, depends to a great extent on the operating conditions and quality of technical maintenance. Properly performed diagnostics is a basic source of information on the current state of the equipment. The association of the results of the inspection carried out in the planned or forced overhaul and operating conditions is a source of information for the planning of diagnostics, overhauls and financial outlays. The greatest benefits can be reached by studying not only individual devices and even similarly structured devices in one power plant or group of power plants. Maximum profit can be achieved by integrating appropriate information as in above mentioned the National Energy System scale. For this purpose we have developed test standards, remote diagnostics systems and an internet portal that integrates information, knowledge and experience. This is the most effective approach to ensure operational safety, high availability, as well as optimization of maintenance costs.
PL
Przeprowadzono badania modelowe w laboratorium wpływu pielęgnacji na właściwości mechaniczne i trwałość betonu nawierzchniowego z kruszywem odkrytym. Beton napowietrzony zaprojektowano jako górną warstwę nawierzchni KR5-KR7 wykorzystując dwa rodzaje cementu CEM I oraz CEM III/A. Zróżnicowanie stosunku w/c (0,34 i 0,37) oraz rodzaju cementu (CEM I 42,5N i CEM III/A 42,5N) w prawidłowo napowietrzonym betonie nie wpłynęło zasadniczo na mrozoodporność wewnętrzną. Zmniejszenie wytrzymałości po 200 cyklach zamrażania i rozmrażania mieściło się w granicach od 4 do 12%. Beton pielęgnowany za pomocą powłoki o szczelności >85%, wykazał bardzo dobrą odporność na złuszczenia powierzchniowe – masa złuszczeń m56 wynosiła 0,10-0,12 kg/m2, niezależnie od rodzaju cementu i w/c. Natomiast stwierdzono znaczny wzrost złuszczeń powierzchniowych, przepuszczalności chlorków i szybkości penetracji wody w niepielęgnowanym betonie.
EN
Modelling studies in laboratory of the effect of curing on the mechanical properties and durability of the concrete pavement with exposed aggregate are presented. Air-entrained concrete was designed as the top layer of a motorway pavement with the use of two types of cements: CEM I and CEM III/A. The w/c increase (from 0.34 to 0.37) and change of cement type (CEM I 42.5N and CEM III/A 42.5N ) in properly air-entrained concrete did not influence significantly the internal frost resistance F200 - a decrease of the compressive strength after 200 freeze-thaw cycles was in the range from 4 to 12%. The lowest reduction of strength was observed for concrete with CEM I, w/c=0.34 and proper air entrainment. The properly air-entrained concrete layer with exposed aggregate, which was cured with a curing agent with closure capacity > 85%, was characterized by a very good resistance to surface scaling - the mass of scales m56 was equal to 0.10-0.12 kg/m2, irrespective of the type of cement and w/c ratio. However, there was a significant increase in the water absorption rate, surface scaling and chloride permeability, which caused with inadequate curing.
PL
W artykule przedstawiono wybrane wyniki rejestracji maksymalnych wielkości przyrostu temperatury na powierzchni materiału w trakcie procesów napawania plazmowego i laserowego oraz strukturyzowania warstwy wierzchniej stopów Fe-C. Pod-czas napawania oraz strukturyzowania laserowego wykonano rejestracje termograficzne przy użyciu kamery termowizyjnej SC5000 firmy FLIR. Analizowano zmiany maksymalnej temperatury w procesie strukturyzowania laserowego. W procesie napawania laserowego dla pojedynczego cyklu, maksymalna zarejestrowana temperatura zawierała się w przedziale od 400 do 550°C. W przypadku kilku następujących po sobie cykli, maksymalna temperatura na powierzchni napoiny wzrosła do 700°C. W eksperymencie napawania plazmowego zarejestrowano znacznie wyższy poziom temperatury maksymalnej. Przy rejestracji na powierzchni bocznej napoiny, maksymalna temperatura zawierała się w przedziale od 880 do 1020°C. W przypadku rejestracji powierzchni górnej napoiny wartości temperatury oscylowały w przedziale od 1400 do 1450°C. Proces strukturyzowania laserowego charakteryzował się wzrostem temperatury maksymalnej do poziomu od 80 do 130°C. Zarejestrowany wzrost temperatury zależał od parametrów procesu strukturyzowania. Decydującym parametrem był krok urządzenia oraz w mniejszym stopniu ilość przejść. Znacznie wyższą temperaturę, ok. 250°C, zarejestrowano w przypadku realizacji podawania kilku impulsów w jeden punkt na powierzchni próbki. Pomiar temperatury w trakcie procesu np. napawania laserowego, pozwala odpowiednio kontrolować ten proces. Wykorzystanie rejestracji termowizyjnej pozwala na opracowanie i optymalizację technologii strukturyzowania i napawania. Uzyskane wyniki umożliwiają określenie szybkości chłodzenia napoiny i materiału podłoża. Jest to istotne dla określenia ”temperatury międzyprocesowej”, czyli temperatury między kolejnymi ściegami napoin.
EN
The article presents the results of the registration of maximum temperature increase on the surface of the material during the plasma and laser overlay welding process and structuring the surface layer of Fe-C. During overlay welding and laser structuring, thermographic recording performed using FLIR's SC5000 thermal camera. The maximum temperature changes in the laser structuring process were analysed. In the process of laser welding for a single cycle, the maximum temperature recorded in the ranged from 400 to 550°C. In the case of several consecutive cycles, the maximum temperature of the surface increased to 700°C. In the case of several consecutive cycles, the maximum surface temperature of the deposit increased to 700°C. In the experiment of plasma deposition, recorded significantly higher maximum level of temperature. For registering on the side surface of the deposit, the maximum temperature ranged from 880 to 1020°C. In the case of registration of the top surface of the deposit, the temperature fluctuated in a range from 1400 to 1450°C. The laser structuring process was characterized by a maximum temperature increase of 80 to 130°C. The recorded rise in temperature depended on the parameters of the structuring process. The decisive parameter was the device step. A significantly higher temperature, about 250°C, was recorded when multiple pulses were applied to one point on the sample surface. Measurement of temperature during the process, eg. laser deposition, allows for proper control of this process. The use of infrared registration, enables the development and optimization of structuring and deposition technologies. The obtained results allow to determine the cooling rate of the deposit and the substrate material. This is important for the definition of "inter-process temperature", the temperature between successive stitches of deposits.
EN
Purpose: Flexor injuries are most common in the hand and require special attention and experience from the surgeon. Both quality and technique affect the stability of the suture. The selection of the optimum method will influence the process of rehabilitation. The aim of this study was to compare three different suture techniques based on the strength, depending on the method of breakage, i.e., axial or pulley load. Methods: The study was divided into six sessions. The research material was dissected deep flexor porcine tendons. Three types of stitches were used: the modified Kessler suture with an additional running suture, the cruciate four-strand suture with an additional running suture and the multistrand running suture. We obtained 120 sutures, 40 for each technique. Breaking strength was assessed using a tensile machine in two ways, i.e., axial or pulley load, with 20 sutures per group. Results: The strongest suture for both axial and pulley load was the cruciate four-strand suture. Between the multistrand running suture and the modified Kessler suture, there was no statistically significant difference in the strength of breaking for both axial and pulley load. Comparing the two ways of breaking, there was no statistically significant difference in the strength of the suture. Conclusions: The multistrand running locking suture is a good alternative to widely used core sutures. It not only provides the same strength as other techniques examined by us but also reduces the procedure time and trauma to the tips of the tendon.
PL
Artykuł obejmuje problematykę procesu zakupów w wybranym przedsiębiorstwie branży automotive. Analizie poddano istotę zakupów zaopatrzeniowych oraz procedurę procesu zakupu. Omówiono główne zadania procesu zakupu oraz występujące w nim problemy. Przedstawiono możliwości pozyskania oszczędności przy zakupie materiałów u dostawców. Opisano także nowe rozwiązanie w dziale zakupów.
EN
The article contains of purchasing process in the production company. It provides the description of purchasing. The article covers procedure of purchasing department. It takes the main issue of purchasing process. An article is presented the possibilities for savings. Also this part of article look at the new solution in purchasing department.
PL
Przedstawiamy przegląd wymagań na beton mrozoodporny zgodny z normami europejskimi oraz specyfikacjami krajowymi, stosowanymi w budownictwie drogowym. Rozpatrujemy zasady doboru składników mieszanki betonowej. Omawiamy lokalne zróżnicowanie agresywności klimatu w zimie i zasięg oddziaływania mrozu w elementach konstrukcji drogowych. Analizujemy charakterystyczne parametry procedury bezpośredniego oznaczania wewnętrznej mrozoodporności, zwłaszcza szybkość ochładzania. Rozkład temperatury w próbkach w trakcie normowych testów mrozoodporności został wyznaczony w dwóch różnych laboratoriach akredytowanych. Przedstawiamy też dyskusję kryteriów oceny mrozoodporności oznaczanej metodą pośrednią - na podstawie charakterystyki porów w betonie napowietrzonym. Na podstawie pomiarów rozkładu temperatury w próbkach postulujemy modyfikację procedury normowej, aby jednoznacznie ustalić szybkość ochładzania. Pożądane jest wyróżnienie stref agresywności oddziaływania mrozu i soli odladzających na beton w obiektach drogowych.
EN
We present a review of freeze-thaw durability requirements laid down in both European standards and in the national specifications in relation to concrete for road structures. The principles of material selection for concrete mix are presented. We discuss local variations in the severity of the winter season and the extent of frost action in the components of road structures. The characteristic parameters of the test procedure for direct assessment of the resistance of concrete to internal damage are analysed, with particular attention paid to the specimen cooling rate. The temperature distribution in specimens was determined in standard freeze-thaw resistance tests carried out at two accredited laboratories. We discuss the criteria used in indirect assessment of freeze-thaw durability of air-entrained concrete on the basis of air void characteristics. Based on the determined temperature distribution in concrete specimens we postulate an improvement of the standard test procedure to clearly specify the cooling rate. It would be beneficial to distinguish frost impact zones depending on the severity of action of frost and de-icing salts on concrete in road structures.
PL
Fałdy w złożach soli często wykazują kształt niecylindryczny. Lokalnie strukturom fałdowym towarzyszą powierzchnie odkłuć, które w niektórych przypadkach mogą być uważane za czynnik inicjujący rozwój fałdów. W artykule przedstawiono badania ewolucji kształtu fałdów futerałowych rozwijających się w warunkach ścinania prostego w sąsiedztwie powierzchni odkłucia ułożonej zgodnie z warstwowaniem. Do badań wykorzystano model analityczny opisujący deformację w otoczeniu powierzchni poślizgu w jednorodnym ośrodku lepkim. Wyniki modelowania wykazują, iż fałdy tworzące się podczas deformacji są wyraźnie niecylindryczne. Struktury ujawniające się na przekrojach prostopadłych do kierunku ścinania o charakterystycznej geometrii oczkowej wymagają odkształcenia ścięciowego γ>5, natomiast fałdy futerałowe będące szczególnym typem fałdów niecylindrycznych o wygięciu linii przegubowej przekraczającym 90º obserwowane są dla γ>10. Fałdy charakteryzują się relatywnie małą wysokością. Kształt oczek jest zwykle silnie wydłużony, a ich stosunek osi wielkiej do małej nierzadko przekracza 10. Fałdy o największej wysokości i wydłużeniu powstają w warstwach, oddalonych od powierzchni poślizgu o ok. 0,2 długości promienia tej powierzchni. Fałdy oczkowe widoczne tuż nad powierzchnią poślizgu mogą mieć U-kształtny kontur, jednakże fałdy o zarysie oczek przeważnie wykształcają się w pewnej odległości od powierzchni poślizgu, co w konsekwencji sprawia, że w naturze może być trudne zaobserwowanie związku fałdów futerałowych z powierzchniami odkłuć.
EN
Folds in evaporites typically have non-cylindrical shapes. Various fold structures are associated with slip surfaces, which, in some cases, can be interpreted as the folding trigger. In the article, we present the analysis of fold shape evolution, studying folds that develop in the vicinity of the layer-parallel slip surface during simple shear deformation. We employ an analytical model that describes the deformation around the slip surface in an isotropic, viscous material. Folds that develop during deformation are clearly non-cylindrical. Folds with an eye pattern in the sections perpendicular to the shearing directions are observed after shear strain γ>5, whereas sheath folds that are specific types of non-cylindrical folds with opening angle exceeding 90º, require γ>10. The folds are characterised by small height. The eye-shape is highly elongated, and their axial ratio commonly exceeds 10. Folds with largest height and elongation are formed in the layers located at the distance of ca. 0.2 of the slip surface radius from the slip surface. Eye structures that develop in the layers closest to the slip surface can have geometry of a concave crescent-shaped roll. Folds with the eye pattern are unlikely to develop next to the slip surfaces in the model, thus, also in the nature these two structures can hardly be noticeable in a single outcrop.
PL
W artykule omówiono zagrożenia wypadkowe występujące podczas użytkowania i obsługi elektrowni wiatrowych. Przedstawiono wymagania dotyczące kwalifikacji i wyszkolenia operatorów oraz wyposażenia ich w odpowiednie środki ochrony indywidualnej. Opisano również główne zadania, urządzenia ochronne oraz wybrane zasady bezpieczeństwa pracy w elektrowni wiatrowej.
EN
This study discusses accident hazards in wind turbines during their exploitation and operation. The requirements relevant to qualifications and training of their operators and providing them with adequate personal protective equipment are presented. Main operations, safety devices as well as chosen occupational safety rules in wind turbines are also described in the article.
PL
Przepływ w szczelinie skalnej wypełnionej proppantem kontroluje procesy transportu, a kształt formującego się frontu przepływu może dostarczyć cennych informacji nt. powierzchni wymiany pomiędzy matrycą skalną a spękaniami. Naszym głównym celem jest zrozumienie procesów związanych z przepływem w skali pojedynczych ziaren proppantu przy użyciu symulacji numerycznych i znalezienie odpowiednich technik do przeniesienia tych modeli do skali całego zbiornika. Rozważany model szczeliny składa się z dwóch równoległych gładkich powierzchni, a przestrzeń między nimi wypełniona jest częściowo jedną warstwą proppantu. Przepływ odbywa się w reżimie niskich liczb Reynoldsa wzdłuż ścian szczeliny, a stacjonarne pole prędkości uzyskane jest przy użyciu symulacji numerycznych w trzech wymiarach i uproszczonych symulacji w numerycznych dwóch wymiarach. Poprawność obu podejść została zweryfikowana analitycznie dla jednego ziarna proppantu, jak i poprzez ich wzajemne porównanie dla bardziej skomplikowanych sytuacji. W kolejnym etapie przeprowadzono systematyczne obliczenia efektywnej przepuszczalności szczeliny w dwóch wymiarach dla różnych współczynników wypełnienia szczeliny proppantem oraz stosunków rozwartości szczeliny do średnicy ziarna proppantu (efekt wciskania ziaren proppantu w ścianę szczeliny). Ostatnim etapem było przeprowadzenie symulacji numerycznych transportu w szczelinie dla wcześniej uzyskanych pól przepływu.
EN
Flow in fracture filled in with propping agent controls transport processes, and a shape of fluid front can deliver valuable information on exchange area between matrix and fractures. Our main aim is to understand processes associated with flow in the scale of single proppant grains with the use of numerical simulations and to find optimal techniques to transfer these models to reservoir scale. Considered fracture model consists of two parallel, equidistant plane walls and the volume between them is filled by partial monolayer of proppant. Flow in low Reynold number regime is along fracture walls and a stationary velocity field is obtained by using numerical simulations in three dimensions and simplified numerical simulations in two dimensions. Validity of both approaches were verified analytically for one proppant grain and by their mutual comparison for more complicated situations. In next step, systematic permeability calculations were done for fracture in two dimensions for various packing fractions and fracture aperture to proppant diameter ratios (effect of proppant embedding in fracture wall). In the last step numerical simulation of transport in fracture were performed for earlier obtained velocity fields.
first rewind previous Strona / 10 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.