Wyniki wyszukiwania - BazTech

1

Stress-strain state simulation of non-uniformly heated elements of components and assemblies of automotive

Hrevtsev O., Selivanova N., Popovych P., Poberezhny L., Brych V. Ya., Rudyak Yu., Shevchuk O., Bakulina N., Rozum R., Buriak M.

Journal of Achievements in Materials and Manufacturing Engineering

|

2022

|

Vol. 115, nr 1

26--32

EN

Purpose: Develop a method for determining and evaluating the stress-strain state, particularly the distribution of thermomechanical stresses in the materials of individual rotating parts of vehicles. Design/methodology/approach: The proposed method is based on the principle of gradual approximations of the solution when the boundary conditions are satisfied on the curvilinear limiting surfaces of the disk body. Findings: The proposed method of determining and estimating the distribution of thermomechanical stresses in the disk material makes it possible to take into account the variable geometry: thickness and presence of a hole in the central part of the disk, also correctly determine stress-strain state at any point of unevenly heated rotating axial body. Research limitations/implications: The work uses generally accepted assumptions and limitations for thermomechanical calculations. Originality/value: It is proved that in real disks, the stress-strain state is spatial, and the well - known method based on the hypotheses of the plane-stress state does not provide the possibility of calculating the values of stresses in the thickness of the disk. The obtained results can be used to improve the methodology of auto technical examination of road accidents. In addition, they can be taken into account by bus drivers on urban routes when choosing a safe distance in heavy traffic, as well as design engineers of car brake systems.

2

Evaluation of stress-strain state of vehicles’ metal structures elements

Hrevtsev O., Selivanova N., Popovych P., Poberezhny L., Rudyak Yu., Shevchuk O., Poberezhna L., Ivanova A., Skyba O., Shashkevych O., Hrytsanchuk A.

Archives of Materials Science and Engineering

|

2022

|

Vol. 113, nr 2

77--85

EN

Purpose: Develop a method for determining and evaluating the stress-strain state, in particular the distribution of thermomechanical stresses in the materials of individual rotating parts of vehicles. Design/methodology/approach: The proposed method is based on the principle of gradual approximations of the solution when the boundary conditions are satisfied on the curvilinear limiting surfaces of the disk body. Findings: The proposed method of determining and estimating the distribution of thermomechanical stresses in the disk material makes it possible to take into account the variable geometry: thickness and presence of a hole in the central part of the disk, also correctly determine stress strain state at any point of unevenly heated rotating axial body. Research limitations/implications: The work uses generally accepted assumptions and limitations for thermomechanical calculations. Originality/value: It is proved that in real disks the stress-strain state is spatial, and the well-known method based on the hypotheses of the plane-stress state does not provide the possibility of calculating the values of stresses in the thickness of the disk. The obtained results can be used as a basis for improving the methodology of auto technical examination of road accidents. In addition, they can be taken into account by design engineers of car brake systems.

3

Simulation of thermomechanical processes in disc brakes of wheeled vehicles

Hrevtsev O., Selivanova N., Popovych P., Poberezhny L., Sakhno V., Shevchuk O., Poberezhna L., Murovanyi I., Hrytsanchuk A., Romanyshyn O.

Journal of Achievements in Materials and Manufacturing Engineering

|

2021

|

Vol. 104, nr 1

11--20

EN

Purpose: Ensuring the required operational reliability of disc brakes by forecasting their technical condition taking into account thermomechanical processes. Design/methodology/approach: Differential equations of rotation of a rigid body around a fixed axis are solved, it is established that the equations of motion and the equations of thermal conductivity are indirectly related. The use of these analytical dependences provides a better understanding of thermomechanical transients. Findings: The solution is obtained on the basis of the differential equation of thermal conductivity of the hyperbolic type, which does not allow an infinite velocity of propagation of temperature perturbations in contrast to the differential equation of thermal conductivity of the parabolic Fourier type. The obtained analytical dependences provide a better understanding of thermomechanical transients and develop a theoretical basis for determining stresses and heat fluxes in solving problems of reliability and durability of disc brakes. Research limitations/implications: The work uses generally accepted assumptions and limitations for thermomechanical calculations. Practical implications: It is shown, that transients in a mechanical system - a brake disk at impulse loadings cause emergence of thermal effects which arise under the influence of external loadings. Originality/value: The application of these analytical dependences provides a better understanding of thermomechanical transients and develops a theoretical basis for solving problems of reliability and durability of disc brakes.

4

Gas hydrates impact on corrosion of the well flow lines material

Poberezhny L., Hrytsanchyk A., Mandryk O., Poberezhna L., Popovych P., Shevchuk O., Mishchuk B., Rudyak Yu.

Archives of Materials Science and Engineering

|

2021

|

Vol. 110, nr 1

5--17

EN

Purpose: Determination of regularities of joint action of mechanical stresses, formation water and hydrate formation on corrosion of material of flow pipelines. Design/methodology/approach: According to the analysis of reservoir water of the investigated deposits, it was found that the main corrosive component is soluble chlorides. Proposed for corrosion and corrosion-mechanical tests of 6 model environments. An estimation of the influence of stress concentration, depending on the defects of the inner wall of the pipe, was carried out, and the nominal local stresses in the pipeline was carried. Findings: The basic regularities of influence of stress and hydration formation on corrosion and localization of corrosion processes and on the kinetics of deformation of samples are described. For samples made of steel 20 and 17GS, an increase in the velocity of general and local corrosion for samples sustained in the gas hydrate was observed compared to the control results obtained, the coefficient of influence of the gas hydrate on corrosion was calculated. Research limitations/implications: The obtained results are valid for thermobaric operating conditions of well flow lines. Practical implications: The data obtained in the work on the patterns of corrosion processes and the impact of hydrate formation on them will allow to identify potentially dangerous areas of flow lines and prevent emergencies. Originality/value: Based on the analysis of the geometric dimensions of the defects, the effective stress concentration coefficients are calculated, and it is shown that the stresses in the vicinity of corrosion defects in normal operating modes range from 164 to 545 MPa.

5

The movement investigation of an axisymmetric rotation body under the action of electromagnetic fields

Hrevtsev O., Selivanova N., Popovych P., Poberezhny L., Shevchuk O., Hrytsuliak G., Poberezhna L.

Journal of Achievements in Materials and Manufacturing Engineering

|

2020

|

Vol. 103, nr 2

67--77

EN

Purpose: To ensure an adequate level of accuracy, it is rational to study the ponderomotor forces of the ring, which drive a hollow disk of variable thickness, hung on the ring. Design/methodology/approach: The solution of the motion problem of a hollow disk of variable thickness suspended on a force ring of rectangular cross section is based on the method of solving the equations of the theory of thermoelasticity. The stress-strain state, as well as the motion of the specified body of rotation, the disk, in studies in a cylindrical coordinate system, under the action of ponderomotor forces. Findings: The motion equation of a hollow disk hung on a force ring-torus is made, exact solutions of the motion equations of a ring in the torus form of rectangular cross section are found. New component expressions of ponderomotor forces, which appear from the action of the ring's own electromagnetic field and cause the motion of a hollow disk, have been found on the basis of Maxwell's equations. It is proved that at high speeds and low natural accelerations the stress - strain state of the disk material does not cause the destruction of the structure. Research limitations/implications: Calculations of ponderomorphic forces are valid for the ring, which drives a hollow disk of variable thickness, hung on the ring. Practical implications: It is proved that at high velocities and small natural accelerations the stress-strain state of the disk medium does not cause structural damage. It is determined that the rotation in the direction of movement at an angle of 90 degrees changes only the direction of the acceleration vector without increasing its value. Originality/value: The dependences between own time and coordinate time are formulated. It is proved that a small change in the natural time for the studied disk can significantly change the coordinate time, and the pulsed electromagnetic field provides the ability to cover infinitely large distances over finite periods of time.

6

Evaluation of strength of carrying metal structures of trailers

Popovych P., Poberezhny L., Shevchuk O., Murovanyi I., Dovbush T., Koval Yu., Hrytsuliak H.

Journal of Achievements in Materials and Manufacturing Engineering

|

2020

|

Vol. 100, nr 2

58--69

EN

Purpose: Development of a computational model of stress-strain state bearing elements of trailer frames for preliminary assessment and identification of areas with increased risk of failure. Design/methodology/approach: The object of the study is the processes of loading the load-bearing metal structures of trailers - fertilizer spreaders. The stress-strain state of the spreader bearing system is investigated for the established three typical cases of external load. To refine the values obtained as a result of modelling, they were determined in SOLIDWORKS. Findings: Computational models of load have been compiled by improving the method of minimum potential deformation energy for its effective correct use in analytical studies of a similar type of metal structures. It is proved that for a flat closed frame structure made of thin-walled profiles, loaded with forces perpendicular to the plane of the frame, the levelling of compression and shear energies, as well as axial and transverse forces and bending moments in the horizontal plane does not significantly affect the calculation results. Research limitations/implications: Horizontal components of the shear forces as well as the normal forces and as a consequence the corresponding potential deformation energy are neglected, which has some effect on the accuracy of the calculations. Practical implications: An effective tool for strength analysis with preliminary assessment and diagnostics of load-bearing metal structures based on the constructed calculation models of stress strain state load-bearing frames of typical geometry with an arbitrarily given distribution of external load. Originality/value: A universal algorithm for recording additive functions of bending and torques, as well as the potential deformation energy of welded frames of trailers.

7

Numerical simulation of the stress state of an erosion-worn tee of the main gas pipeline

Doroshenko Ya., Zapukhliak V., Grudz Ya., Poberezhny L., Hrytsanchuk A., Popovych P., Shevchuk O.

Archives of Materials Science and Engineering

|

2020

|

Vol. 101, nr 2

63--78

EN

Purpose: To investigate the strength of tees with regard to their erosion wear, it is necessary to consider the complex three-dimensional geometric shape of the erosion worn inner surface of the tee. In addition, the study of the strength of the erosion worn tees of the main gas pipelines is complicated by the occurrence of additional stresses caused by changes in the direction of movement of the gas stream, resulting in an uneven pressure distribution in the inner cavity of the tee, and the temperature difference in its walls. Design/methodology/approach: Methodology for complex numerical three-dimensional simulation of the stressed state of tees of the main gas pipelines, taking into account the gas-dynamic processes that occur in the places of these defects, erosion wear of the tee wall, temperature difference in the tee walls. Findings: The acceptable parameters of erosion defects of tees of gas pipelines, and residual life of tees with erosion defects of the wall should be determined. Research limitations/implications: The developed model does not take into account internal corrosion and corrosion products as an additional erosion factor. Further studies plan to develop a model of corrosion-erosion wear of pipeline elements. Practical implications: The developed technique allows determining the location of erosion defects, estimating the strength and determining the residual life of tees with erosion wear of the wall in order to ensure their reliability, to rank such defects according to the degree of danger, to determine which of them are critical and need an immediate repair. Originality/value: Based on the gas-dynamic processes occurring in the internal cavity of the main gas pipelines’ tees, the complex three-dimensional geometric form of wall erosion defects, and temperature difference, the technique of three-dimensional simulation of stress state of the main gas pipelines’ tees is developed

8

Prediction of transport vehicles’ durability with consideration of corrosive surface cracks propagation in structural elements

Droździel P., Popovych P., Vitenko T., Shevchuk O., Zolotyi R., Kononchuk O.

Zeszyty Naukowe. Transport / Politechnika Śląska

|

2018

|

z. 101

47--57

EN

Support frameworks of transport vehicles operate under varying terrain conditions under the influence of extreme climate and corrosive environments. When transporting cargo, dust is deposited on the surface of metal structures. The combination of dust and moisture creates an aggressive environment resulting in intense corrosion damage. The damage is caused by the defects of corrosion pitting, which occur on the surface and transform into corrosion cracks. Based on energy approaches, with the application of well-known results for the mathematical description of electrochemical reactions and the principles of fragile fracture mechanics, an analytical model of durability is proposed for the first time. The model determines the residual life of maximum loaded elements of undercarriages with surface cracks under the action of dynamic loads and corrosive environments. For this case, a set of mathematical relations in the form of a non-linear differential equation was developed, as well as the initial and final conditions for determining the life of vehicles’ structural elements with corrosive surface cracks. The analytical model implementation is proven by solving the problem of determining the residual life of a vehicle’s element, i.e., a steel plate, weakened by a semi-elliptical surface crack, which is under the action of dynamic loads in a 3% sodium chloride solution. The insignificant increase in the crack’s initial size is proven to greatly reduce the period of its subcritical growth. The developed model was applied to define the residual life of thin-walled elements of structures with surface cracks.

9

Current state and near-term prospects for development of the transport logistics market in Ukraine

Karpenko O., Kovalchuk S., Kuzmych V., Gorpyniuk A., Shevchuk O.

Journal of Sustainable Development of Transport and Logistics

|

2017

|

Vol. 2, No. 1

51--60

EN

The article has studied the current state of the transport services market in Ukraine, characterized features of the favorable geopolitical position of the country, identified segments of the market of transport and logistics services in Ukraine, made an analysis of the dynamics of freight transportation by land transport, determined its capacity in money terms and calculated the component share of this type of activity in the country’s GDP.

10

Research of main analysis parameters of infiltration areas connecting to the storm drainage system

Shevchuk O., Tkachuk O.

Budownictwo i Inżynieria Środowiska

|

2017

|

Vol. 8, no. 4

203--209

EN

Infiltration areas with permeable pavements are one of the most effective modern methods of stormwater management on urban areas that permit accumulation of rainfall directly at place of precipitation. The paper justifies the expediency of inclusion of infiltration areas in the storm drainage system to ensure the effective stormwater management on urban areas. Thus, the aim of this paper is to calculate infiltration areas’ basic parameters following the experimental and theoretical studies undertaken by authors. Based on these studies, a mathematical model of filling and emptying of base layer of infiltration areas by connecting them to the rain drainage systems is determined. As a result the formulae of calculation of the stormwater volume that detained on the infiltration areas, and the drainage discharges that came in the rain drainage system are received and verified. Moreover, obtained results permit to realize stormwater management on urban areas that depend on parameters of infiltration areas and pipe capacity of drainage system.

11

Prospects on Ukrainian logistics market orientation for international customers

Karpenko O., Kovalchuk S., Shevchuk O.

Journal of Sustainable Development of Transport and Logistics

|

2016

|

Vol. 1, No. 1

27--33

EN

The article analysed and established the current trends in the logistics environment in Ukraine. There was grounded the necessity of implementing the principles of customer management to the systems of logistic service. There was formulated conceptual mechanism of choosing the optimal carrier based on the methodology of time deviations control in the provision of transport services.