Purpose: of this article is to present the results of tests carried out on the impact of repeated heating on the corrosion resistance of a Co-Cr-W prosthetic alloy. Design/methodology/approach: The study used samples prepared in a manner analogous to the production of a dental prosthesis. The effect of three and six-time heating of the material on its properties such as corrosion resistance, microstructure and material hardness were carried out. Findings: Repeated heating of the chromium-cobalt alloy has no significant effect on the polarization resistance and the potentiodynamic characteristics of the material. The introduction of heating in alloy treatment results in an increase in the hardness of the material, however, the number of annealing cycles does not affect this feature significantly. Samples subjected to different amounts of thermal treatments have different microstructure; it should be assumed that this will change the mechanical properties. Research limitations/implications: Microstructure tests carried out after electrochemical corrosion tests showed changes in the microstructure of samples subjected to subsequent annealing. The tests of material hardness and corrosion did not show any significant differences that may result from differences in structure, therefore further tests characterizing the physical properties of the material will be carried out. Originality/value: The article is a description of preliminary research on the impact of multiple annealing used in dental prosthetics on the properties of metallic material. Further work will be carried out to identify the properties that may be affected by the indicated changes in microstructure.
The paper presents the preparation and characterization of TiO2 coating doped with Ca produced by the sol-gel method using titanium alkoxide as the precursor of titania as well as calcium nitrate as dopant source. These coatings were used to modify the biomedical alloy M30NW. Using the optical microscopy and the atomic force microscopy the topography of synthesized coatings was characterized. Whereas using electrochemical methods the corrosion measurements were carried out. Anticorrosion properties of calcium-doped TiO2 coating were determined in PBS solution on the basis of corrosion potential Ecor, polarization resistance Rp, corrosion rate CR, current density in the passive range i0.5 and also breakdown Eb and repassivation Erep potentials. Analogous corrosion tests were also made for the uncoated alloy as well as for alloy coated with pure TiO2 coating. It was stated that modification of M30NW alloy surface by calcium-doped TiO2 coating shows anticorrosion properties in PBS solution. These properties are slightly lower compared to a pure TiO2 coating. The analysis of the topography of TiO2-based coatings showed that calcium doping increases the surface development and roughness of the obtained coatings.
3
Dostęp do pełnego tekstu na zewnętrznej witrynie WWW
This paper presents the properties of plasma and HVOF thermally sprayed coatings obtained by blending the NiCrBSi and Fe2O3 powders. The deposition was performed by means of the Plancer PN-120 and the Diamond Jet guns for plasma spraying and HVOF spraying, respectively. The SEM (EDS) and XRD methods were employed to study the microstructure and phase composition of the produced coatings. Although the blended powders differ in particle size, shape, and distribution, it is possible to obtain composite coatings with an NiCrBSi matrix containing iron oxides. Except for a different microstructure, plasma and HVOF coatings have a different phase composition, which was examined using the Bruker D-8 Advance diffractometer. Studies of the coatings wear and scuffing resistance showed that an optimal content of Fe2O3 is about 26% for plasma sprayed coatings and 22,5% for HVOF deposited coatings.
PL
W pracy przedstawiono właściwości natryskanych plazmowo i HVOF powłok otrzymanych w wyniku wymieszania proszków NiCrBSi i Fe2O3. Natryskiwanie przeprowadzono w za pomocą plazmotronu Plancer PN-120 i systemu do natryskiwania naddźwiekowego Diamond Jet. Badania mikrostruktury i składu fazowego natryskanych powłok przeprowadzono wykorzystując SEM (EDS) i XRD. Wyniki ujawniły, że pomimo znacznych różnic wielkości, kształtu i rozkładu granulometrycznego proszków, możliwe jest uzyskanie powłok kompozytowych na osnowie NiCrBSi zawierających tlenki żelaza. Stosując dyfraktometr Bruker D-8 Advance, wykazano, że oprócz różnic mikrostrukturalnych, powłoki mają również odmienny skład fazowy. Badania zużycia powłok i ich odporności na zatarcie wykazały, że optymalna zawartość Fe2O3 wynosi ok. 26% dla powłok natryskiwanych plazmowo i 22,5% dla HVOF.
4
Dostęp do pełnego tekstu na zewnętrznej witrynie WWW
Presented are the results of the tests demonstrating effect of the coating material crystalline structure on residual stress occurring in nanostructural or conventional WC-12CO or Fe304 coatings obtained by supersonic spraying process.
PL
Przedstawiono wyniki badań określających wpływ budowy krystalicznej materiału powłokowego na naprężenia własne w natryskiwanych naddźwiękowo nanostrukturalnych i konwencjonalnych powłokach WC-12Co i Fe304.
5
Dostęp do pełnego tekstu na zewnętrznej witrynie WWW
This work presents the results of analysis of residual stresses generated at various stages of production of Al2O3 sinters (sintering, mechanical processing). Residual stresses were determined by the g-sin2Ψ X-ray method. The process of ceramic sintering of Al2O3 was carried out at varying parameters: temperature and heating time, heating rate, cooling rate. After mechanical processing (grinding), the materials were subjected to heat treatment, consisting of heating to temperatures in the range of 600 - 1200 °. In order to determine the mechanical properties of the materials, HV30, HV0.3 and HV0.1 hardness measurements were made. K(Ic) and HVG stress intensity index values were also determined.
PL
W pracy zaprezentowano wyniki analizy naprężeń resztkowych powstających na różnych etapach produkcji spieków Al2O3 (spiekanie, obróbka mechaniczna). Naprężenia resztkowe oznaczono rentgenowską metodą g-sin2Ψ. Spiekanie ceramiki Al2O3 przeprowadzono przy zróżnicowanych parametrach procesu - temperatura i czas ogrzewania, szybkość ogrzewania i studzenia. Po obróbce mechanicznej (szlifowanie) materiały poddano obróbce cieplnej polegającej na ogrzewaniu do temperatury z zakresu 600 - 1200 stopni C. Aby określić właściwości mechaniczne zmierzono twardość HV30, HV0.3 i HV0.1 materiałów. Oznaczono też wartości współczynników intensywności naprężeń K(Ic) i HVG.
6
Dostęp do pełnego tekstu na zewnętrznej witrynie WWW
Purpose: The goal of this work is to compare the macro-stresses as well as mechanical and functional properties of the PVD and CVD coatings deposited on oxide and nitride ceramics tool. Design/methodology/approach: In the paper the residual macro-stresses of PVD and CVD coatings deposited on tool ceramics substrates, measured with the application of the grazing angle X-ray diffraction geometry are compared in relation to the fundamental mechanical properties like hardness and adhesion. Findings: Basing on the tribological test made by the use of the „pin-on-disk” method, the influence of the residual macro-stresses to wear resistance is being investigated. Practical implications: The process of covering tools with the thin wear resistant PVD and CVD coatings is currently the most commonly method used to extend their life. Investigations of those coatings determining their mechanical properties, chemical composition, and structure, enable to pick out the optimum coatings for given industrial applications. Originality/value: New X-ray diffraction g-sin2ř method based on glancing angle X-ray beam geometry (GID), macro-stresses of the examined CVD and PVD coatings have been measured.
7
Dostęp do pełnego tekstu na zewnętrznej witrynie WWW
W artykule przedstawiono wyniki badań stopowych warstw wierzchnich na podłożu ze stali austenitycznej X10CrNi18-8. Analizowane warstwy otrzymano w wyniku laserowego przetapiania podłoża z naniesioną warstwą proszku Fe-Al. Wykonano dyfrakcyjną analizę fazową, obserwacje mikrostruktury otrzymanych warstw wzbogaconych w fazy międzymetaliczne z układu Fe-Al oraz pomiary mikrotwardości. Uzyskane podczas laserowego przetapiania warstwy charakteryzują się silnie rozdrobnioną mikrostrukturą. Znaczny wzrost mikrotwardości w odniesieniu do podłoża był efektem powstania związków międzymetalicznych w analizowanej warstwie wierzchniej. Maksymalna wartość mikrotwardości wynosiła ok. 490 [mi]HV[40].
EN
Alloyed surface layers on X10CrNi18-8 austenitic substrate were presented in this work. The alloyed surface layers after laser melting with powder layer contained Fe-Al intermetalic compounds were analized. Investigated layers were enriched with intermetallic phases from Fe-Al system. X-ray diffraction phase analysis, optical microscopy and microhardness measurements were used to explain relation between phase composition, microstructure and some properties. Laser treatment caused refinement of alloyed ferrite and austenite microstructure and additionally some ordered intermetalic phases. Formed in surface layers intermetallic compounds caused meaningfully increase of microhardness to 490 [mi]HV[40] in comparison with substrate 200 [mi]HV[40].
8
Dostęp do pełnego tekstu na zewnętrznej witrynie WWW
The electrochemical properties of aciclovir (Acy) were studied by square wave voltammetric method (S\VV) over pH range 1.5-8.0 using a controlled growth mercury drop electrode (CflMDE). In the acid medium the cathodic peak current was observed. Surface catalytic electrode mechanism based on the hydrogen evolution reaction was analyzed. The dependence of the peak current at about -1.3 V vs Ag/AgCI electrode on pH, buffer concentra-tion, nature of the buffer, amplitude, frequency and scan rate was investigated. The best results were obtained in solution of nitric acid at pH 1.9. This electroanalytical procedure enabled to determine aciclovir in the concentration range 2 x 10-7-2 x 10-7 mol L-1. Repeatability, precision and accuracy of the developed method were checked. The detection and quantification limits were found to be 7 x 10-8 and 2 x 10-7 respectively.
PL
Badano elektrochemiczne właściwości acyklowiru (Acy) metodą woltamperometrii z falą prostokątną (SWV) używając elektrody rtęciowej o kontrolowanym wzroście kropli (CGMDE) w zakresie pH l ,5-8. W środowisku kwaśnym zaobserwowano katodowy prąd piku. Analizowano mechanizm elektrodowy związany z katalityczną redukcją wodoru w obecności acyklowiru. Zbadano zależność prądu piku przy potencjale około -1.3 V od rodzaju i stężenia buforu, amplitudy, częstotliwości, szybkości przykładania potencjału. Najlepsze wyniki uzyskano w kwasie azotowym(V) o pH 1.9. Oznaczono acyklowir w zakresie stężeń 2 x 10-7-2 x 10-7 mol L-1. Sprawdzono powtarzalność, precyzję -i dokładność opracowanej metody. Stwierdzono, że granica detekcji wynosi 7 x 10-8, zaś granica ilościowego oznaczenia 2 x 10-7.
9
Dostęp do pełnego tekstu na zewnętrznej witrynie WWW
W pracy omówiono podstawowe systemy natryskiwania naddźwiękowego oraz przeprowadzono badania współczynnika tarcia natryskanych naddźwiękowo powłok węglikowych z proszków WC-Co i Cr3C2--25%NiCr. Powłoki nałożono z użyciem systemu do natryskiwania naddźwiękowego TAFA JP-5000 (HVOLF). Badania mikrostruktury otrzymanych powłok przeprowadzono pod mikroskopem SEM-EDS. Do badań składu fazowego oraz pomiaru naprężeń własnych w natryskanych powłokach zastosowano dyfraktometr Bruker D-8 Advance. Pomiar współczynnika tarcia przeprowadzono na testerze tribologicznym T-01M typu pierścień-kulka.
EN
The main systems of ultrasonic spraying were discussed. The friction coefficient research of ultrasonically sprayed carbide coating of WC-Co and Cr3C2-25%NiCr powders were presented. The coating were applied with the use of ultrasonic spraying system TAFA JP-5000 (HVOLF). Microstructure of coatings were investigated with SEM-EDS microscope. Phase composition and internal stresses were evaluated with Brucker D-8 Advance diffractometer. Friction coefficient were measured on ring-ball type tribo-tester T-01M.
10
Dostęp do pełnego tekstu na zewnętrznej witrynie WWW
Various kinds of fatigue experiments, machining and surface treatments can cause a phase transformation and/or non-uniform plastic deformation in surface layers of heat-treated and stainless steels or other materials containing metastable phases. It is connected with a volume change and non-uniform elasto-plastic deformation, which create residual macro and/or micro- stresses. The phase composition and distribution of residual stresses reveal gradient-like properties in most cases. A surface preparation usually requires a treatment like grinding and/or polishing and burnishing before the coating deposition. It was found that burnishing caused large compressive residual stresses and phase transformation of austenite in thin surface layer whereas grinding caused tensile surface stresses. An application of (...) method based on the grazing angle X-ray diraction geometry makes possible to obtain the real value and also the distribution of residual macro-stresses. The incorporation of this geometry to the X-ray diraction phase analysis enables to analyse the phase contents under the surface in non-destructive means.
PL
Różnorodne eksperymenty zmęczeniowe, obróbka mechaniczna i niektóre obróbki powierzchniowe mogą wywołać przemianę fazową, niejednorodne odkształcenie sprężyste i plastyczne w warstwach powierzchniowych obrobionych cieplnie stali lub innych materiałów zawierających metastabilne fazy. Takie zjawisko jest związane z lokalną zmianą objetości, co z kolei wywołuje niejednorodne odkształcenia sprężysto-plastyczne, które wytwarzają makro i mikro-naprężenia własne. Skład fazowy i rozkład naprężeń własnych sa cechami gradientowymi w tego typu przpadkach. Badania wykazały, że nagniatanie kuleczkami spowodowało duży stan ściskających naprężeń własnych i znaczną przemianę fazową stopowego austenitu, natomiast szlifowanie wywoływało rozciągające naprężenia własne. Zastosowanie metody (...) opartej na dyfrakcji promieni X w geometrii stałego kąta padania (zwanej też geometrią kąta poślizgowego) umożliwiło pomiary rzeczywistych wartości gradientowego rozkładu naprężeń własnych. Zastosowanie tej dyfrakcji do ilosciowej analizy fazowej umozliwiło badania rozkładu zawartości faz wzdłuż głębokości w nieniszczący sposób.
W artykule przedstawiono wyniki badań struktur powłok natryśniętych plazmowo i naddźwiękowo, otrzymanych z mieszaniny proszków NiCrBSi i Fe2O3. Przeprowadzono analizę składu granulometrycznego, chemicznego i fazowego natryskiwanych proszków. Badania mikrostruktury otrzymanych powłok pokazały, że zmieszaniny proszków o zróżnicowanej budowie i granulacji można otrzymać powłoki kompozytowe. Wykonana analiza fazowa wykazała różny ich skład fazowy w zależności od zastosowanej metody natryskiwania.
EN
This paper shows results of structure investigations of plasma HVOF sprayed coatings. The coating material was blend of NiCrBSi i Fe2O3 powders. Granulometric, chemical and phase analysis of spraying powders were carried out. Investogations of coating microstructures shows that sprayed blend of powders possessing different shape of graints and granulometry forms composite coating. The phase analysis showed different composition depended on applied spraying technique.
Badania procesu dyfuzyjnego aluminiowania różnych stopów żelaza (stal 45, 1H17, Cr20Al5 i Fe -armco) w stopowym proszku samorozpadowym uzyskanym z samorzutnego rozpadu wysokoaluminiowego żeliwa opisano w prezentowanej pracy. Celem badań było stwierdzenie możliwości zastoswania takiego proszku do celów dyfuzyjnego aluminiowania stali. Badania wykazały, że w odpowiednich warunkach powstaja warstwy wzbogacone w aluminium, tworzące nadstruktury FeAl i Fe3Al. Celem takiejobróbki cieplno - chemicznej jest połączenie własności mechanicznych i antykorozyjnych.
EN
An aluminizing process of different iron alloys (C 45 steel, 1H17 steel, Cr20Al15 (kanthal) and Fe -armco) with application of self - decomposition powder was carried out. The object of study were diffusion layers deposited on steels. Investigation shows that applied conditions of treatment were suitable to form layers enriched witch aluminium. The surface layers consist of FeAl and Fe3Al superlattice. The thermo - chemical process was applied to improve mechanical and corrosion properties.
W pracy przedstawiono wyniki badań wybranych właściwości fizycznych proszków związków międzymetalicznych układu Fe-Al i Ni-Fe-Al oraz wyniki badań dyfrakcyjnych proszków po samorzutnym rozpadzie. Celem tych badań było określenie składu fazowego proszków, pomiar parametru sieci krystalicznej oraz stopnia uporządkowania struktury faz międzymetalicznych. Proszki samorozpadowe uzyskano z odlewów zawierających wagowo: (1,25 % C, 35,5 % Al, 63,25 % Fe) oraz (1,12 % C, 33,5 % Al, 35,5 % i 29,88 % Fe). Badania składu ziarnowego wykazały, że proszki samorozpadowe Ni-Fe-Al zawierają wagowo 8,1 % frakcji poniżej 32 mikrometrów, natomiast proszki Fe-Al tylko 3,7 % tej frakcji. Gęstość nasypowa proszków Ni-Fe-Al wynosi od 1,91 do 2,3 Mg/ cm sześcienny, natomiast proszków Fe-Al od 1,64 do 1,74 Mg/metr sześcienny, przy czym im dawniejsza frakcja, tym gęstość jest mniejsza. Sypkość, mierzona czasem przesypywania przez znormalizowany lejek jest zdecydowanie wyższa dla proszków z układu Ni-Al-Fe. Badane proszki Fe-Al i Ni-Al-Fe zawierają roztwory stałe uporządkowane. Fizyczne poszerzenie linii dyfrakcyjnych wskazuje na niewielkie zróżnicowanie zdefektowania i rozmiarów krystalitów w ziarnach poszczególnych frakcji. Proszki zawierające Ni charakteryzują się mniejszą wartością parametru sieci krystalicznej, co może być wynikiem zastępowania atomów Fe przez atomy Ni w węzłach sieciowych.
EN
Examinations of some physical properties of intermetallic powders of Fe-Al and Ni-Fe-Al systems are presented. Powders of these intermetallic phases were obtained by self decomposition process of cast alloy. Self-decomposition powders have been obtained from cast alloys with the following composition: 1.25 % wt. C, 35.5 % wt. Al, 63.25 % wt. Fe and 1.12 % wt. C, 33.5 % wt. Al and 29.88 % wt. Fe. Examination of size distribution proved that size composition of powders with Ni contained 8,1 % vol. fine dispersion grain below 32 micrometres, however powders from Fe-Al systems contained only 3.7 % of this fraction. Bulk density of powders with Ni-Fe-Al alloy equals 1.91 to 2.3 Mg/cubic metre, and for Fe-Al powder 1.64 to 1.74 Mg/cubic metre. Flow rate of Ni-Al-Fe powder is higher than Fe-Al powder. The results of diffraction methods used in research of these powders are also presented. Aim of this research was to determine of phase composition, measurements of crystal lattice parameter and degree of ordering. These Fe-Al and Ni-Al-Fe powders contain some order solid solution. Lattices spacing in both powders are different. The powders contain Ni characterized low value of lattice spacing which may be as a result of replacement Fe atoms by Ni in lattice points. Both types of powders are to use in sintering process.
The method based on the grazing incident angle geometry was applied for stress measurement in surface layers of polycrystalline samples. The advantage of this geometry is a constant penetration depth of the X-ray beam during experiment, however, the interpretation of experimental data is more difficult than for the standard technique. Diffraction elastic constants have to be calculated for various "hkl" reflections. The influence of elastic anisotropy on the results of stress measurement is studied.
PL
Metoda oparta na geometrii stałego kąta padania zastosowana została do pomiaru naprężeń w warstwach powierzchniowych próbek polikrystalicznych. Zaletą metody jest stała głębokość wnikania promienia rentgenowskiego podczas pomiarów, jednak interpretacja danych doświadczalnych jest trudniejsza niż w przypadku standardowej techniki. Dyfrakcyjne stałe elastyczne muszą być obliczone dla różnych refleksów "hkl". Rozważony jest wpływ anizotropii elastycznej materiału na wyniki pomiaru naprężeń.
W artykule przedstawiono kilka geometrii dyfrakcji promieniowania X, aby wskazać na ich zalety i wady w zastosowaniu do badań cienkich warstw. Możliwość uzyskiwania ukierunkowanej informacji w stosunku do badanego przedmiotu z obrazu dyfrakcyjnego powoduje, że metody dyfrakcyjne szczególnie nadają się do badań cienkich warstw. Możliwość uzyskiwania ukierunkowanej informacji w stosunku do badanego przedmiotu z obrazu dyfrakcyjnego powoduje, ze metody dyfrakcyjne szczególnie nadają się do badań warstw powierzchniowych. Dla uzyskania tego stwierdzenia przeanalizowano dodatkowo efektywne głębokości wnikania promieniowania X. Dyfrakcja w geometrii stałego kąta padania umożliwia tomograficzne badania właściwości warstw, powłok i filmów.
EN
Majority of diffraction methods have ability to be applied in surface engineering. X-ray diffraction methods are able to measure some properites in demanded direction in investigated object. The X-ray effective depth of penetration is main factor characterising application ability of X-ray diffraction methods to thin films. The grazing angle of X-ray diffraction geometry is becoming as a powerful tool for tomografic investigations of thin layers.
W pomiarach naprężeń własnych (NW) występuje wiele problemów związanych z metodologią. Metody oparte są na zależności różnych właściwości od naprężeń i dodatkowo mają różny zasięg pomiarowy, tzn. różną powierzchnię pomiaru i efektywną głębokość pomiaru. To utrudnia porównywanie wyników i ich interpretację. Ważna grupa metod oparta jest na dyfrakcji promieni X i neuronów a wśród nich rozpowszechniona jest metoda [wzór]. W artykule opisano wyniki pomiaru NW warstw TiN na podłożu ze spiekanej stali szybkotnącej. Ponieważ konwencjonalna metoda [wzór] udawała wyniki trudne do interpretacji, zastosowano zmodyfikowaną metodę [wzór] opartą o dyfrakcję w geometrii stałego kąta padania. Problemy interpretacyjne wyników klasycznej metody [wzór] związane były z anizotropią teksturową, z gradientem NW i zmienną efektywną głębokością wnikania. Zastosowanie nowej zmodyfikowanej metody [wzór] dało zazadowalające wyniki.
EN
There are a lot of discrepancies in results of residual macro-stresses measurements. Some of them are due to methodology and other are due to complexity of material and sample preparation. X-ray diffraction methods are on important group amoung others, but they differ one to another in geometry of measurement, in effective depth of penetration. On the other hand, residual stress in samples can present complex distribution and material can be treated as isotropic and/or anisotropic body. Macro-residual stresses in TiN coatings deposited on sintered high-speed steel were measured with new methodology developed due to grazing angle X-ray beam diffraction geometry. The new method named [formula] is less sensitive to texture anisotropy and is able to measure in well-defind and constant volume of irradiated sample. The obtained results can inform about gradient of residual stresses along thickness of the coating.
W pracy przedstawiono wyniki badań nad zastosowaniem wysokoenergetycznego młyna do intensywnego mielenia i mechanicznego stopowania materiałów proszkowych. Wskutek jednoczesnego działania na mielony materiał wielu fizycznych pól siłowych jest on poddawany intensywnej destrukcji. W młynie wysokoenergetycznym moc uzyskiwana w strefie wirujących elementów ferromagnetycznych osiąga wartość rzędu 2 MW / metr sześcienny. Już po kilkudziesięciu sekundach mielenia materiałów w młynie uzyskuje się wyniki przewyższające rezultaty mielenia w tradycyjnych młynach po kilkudziesięciu godzinach. Stwierdzono, że szczególnie intensywnemu mieleniu ulegają materiały kruche i twarde. W przypadku proszku samorozpadowego FeAlSi (używanego do wytwarzania spieków i natrysku plazmowego) o wyjściowej ziarnistości powyżej 155 mikrometrów, już po 120 s mielenia uzyskuje się produkty o ziarnistości średniej 6 mikrometrów, oraz 50% udziału frakcji poniżej 4 mikrometry i 25% frakcji poniżej i 1,4 mikrometrów. W przypadku Fe2O3 po 60 s mielenia 50% udziału produktów stanowią cząstki o wymiarach poniżej 0,85 mikrometrów. Jest to prawie 25-krotne rozdrobnienie w stosunku do stanu wyjściowego, a dla FeAlSi prawie 38-krotne. Po 240 s mechanicznego stopowania, badaniami rentgenograficznymi stwierdzono osłabienie i poszerzenie linii dyfrakcyjnych od składników stopowych oraz pojawienie się refleksów od nowych związków. Zanik linii dyfrakcyjnych może być związany z procesem amorfizacji, co jest efektem działania wysokiej energii, lokalnych ciśnień (do 1000 MPa). Produkty mechanicznego stopowania cechuje ponadto duża aktywność chemiczna.
EN
Investigation results of using high-energy mill for intensive milling and mechanical alloying of powder materials have been presented. Since there are many physical force fields that influence simultaneously the ground material it undergoes intensive destruction. In the high-energy mill power obtained in the zone of spinning ferromagnetic elements reaches the values of 2 MW/cubic meters. After tens of seconds of milling the materials in the mill results are obtained which exceed results of milling in the conventional mills after tens of hours. It has been found that brittle and hard materials undergo particularly intensive milling. In the case of the FeAlSi self-disintegrating powder (used for manufacturing of sinters and plasma spraying) with the initial granularity of above 155 micrometers, already after 120 s of milling products with the mean granularity of 6 micrometers and 50% fraction content below 4 micrometers and 25% fraction below 1,4 micrometers were obtained. In the case of Fe2O3 after 60 s milling 50% fraction of products are particles with sizes below 0,85 micrometers. It is almost 25 times higher size reduction than compared to the initial state, and for FeAlSi almost 38 times. After 240 s of mechanical alloying, weakening and widening of the diffraction lines from the alloying elements and presence of reflections from new compounds were found by X-ray examinations. Disappearance of the diffraction lines can be connected with the amorphization process which is the effect of high energy influence and local pressures (to 1000 MPa). The products of mechanical alloying are characterised by additionally by high chemical activity.
Opracowanie przedstawia wyniki badań porównawczych próbek z kompozytów na osnowie PTFE napełnianych proszkami aluminków żelaza pozyskiwanych z materiału odpadowego oraz kompozytów napełnianych proszkami.
19
Dostęp do pełnego tekstu na zewnętrznej witrynie WWW
Azo-dye, calcone (3-hydroxy-4-[(2-hydroxy-1-naphtyl)-azo]-1-naphtalene sulphonic acid, monosodium salt) and its beryllium complex were studied by differential pulse polarography. It was found, that calcone (calc.) formed an additional cathodic peak in the presence of beryllium ions in ammonium buffer. The peak of the complex was shifted about -200 m V to potentials more negative, than the peak of the free dye. The complex formed was stable and the corresponding complex peak remained constant for an hour. The dependencies of peak current on pH and calcone concentration were studied. pH 9.5 was chosen as the most favourable and it was stated that 10-fold excess of dye in relation to beryllium concentration was sufficient to complex all beryllium ions. A possibility of differential pulse polarographic determination of beryllium in the concentration range from 4 x 10(-7) mol l(-l) to 1.2 x 10(-5) mol-1 was found and the results were procassed statistically. The influence of calcium and magnesium, in the presence of EDTA as an masking agent, on peak current of the complex was studied. ĎC polarographics studies of the complex limiting current in function of mercury column height, and electrocapillary curves of calcone and its beryllium complex were carried out.
PL
Barwnik azowy kalkon (sól sodowa kwasu 3-hydoksy-4-[(Z-hydroksy-1-naftyl)-azo]-1--naftalenosulfonowego) i jego kompleks z berylem był badany metodą polarografii pulsowej różnicowej (DPP). Stwierdzono, że w buforze amonowym kalkon (calc.) tworzy w obecności jonów berylu dodatkowy pik prądu redukcji. Pik ten jest przesunięty w stosunku do piku prądu redukcji wolnego barwnika w kierunku bardziej ujemnych wartości potencjałów o około -200 mV. Tworzący się kompleks jest trwały i nie rozpada się w ciągu godziny. Zbadano zależność natężenia prądu redukcji kompleksu od pH buforu amonowego i stężenia kalkonu. Jako optymalny wybrano bufor o pH 9.5 i stwierdzono, że 10-ciokrotny nadmiar kalkonu jest wystarczający dn oznaczenia berylu w kompleksie. Wykazano liniową zależność prądu piku od stężenia berylu w zakresie od 4 10(-7) mol 1(-1) do 1.2 10(-5) mol 1(-1), uzyskane wyniki opracowano statystycznie. Zbadano wpływ wapnia i magnezu w środowisku EDTA jako czynnika maskującego na pik prądu redukcji kompleksu. Z zależności natężenia prądu redukcji kompleksu od poprawionej wysokości słupa. rtęci i na podstawie badań odpowiednich krzywych elektrokapilarnych określono charakter prądu redukcji kompleksu.
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.