Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 3

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
EN
Purpose: The current study aimed to quantify the main influences and the interactions (joint effects) of gender, leg and type of target on the biomechanics of front kick quality. Through the quantification, we tried to identify the relevant factors related to the kick accuracy and maximum velocity for coaching practice. Methods: A ten-camera NIR VICON MX40 motion capture system (250 Hz) was used to determine the kicking foot maximum velocity from two well-trained subject groups (8 males and 6 females). Each subject performed both left and right front kicks in a lateral standing position into the air (without a physical target), to a board, to a table tennis ball and to a training shield. The target were set on a height corresponding to a height of solar plexus of each participant. Results: The results showed that all the three factors (gender, leg and type of target) have significant influences on kicking speed ( p < 0.001) and significant interaction (joint effect) was only found between gender and target ( p < 0.001). Further analysis revealed that the males’ kicking maximum velocity was affected more by board, while females’ one was affected by the size of the target. Conclusions: The results would seem to suggest that, for males, kick-to-a-board may be the more effective method for increasing kick quality, compared to other type of target. For females, kick-to-a-small-ball appears to be effective method for increasing kick maximum velocity.
EN
Purpose: About 70% injury of gymnasts happened during landing – an interaction between gymnast and landing mat. The most injured joint is the ankle. The current study examined the effect of mechanical properties of landing mat on ankle loading with aims to identify means of decreasing the risk of ankle injury. Method: Gymnastic skill – salto backward stretched with 3/2 twist was captured by two high-speed camcorders and digitized by using SIMI-Motion software. A subject-specific, 14-segment rigid-body model and a mechanical landing-mat model were built using BRG.LifeMODTM. The landings were simulated with varied landing-mat mechanical properties (i.e., stiffness, dampness and friction coefficients). Result: Real landing performance could be accurately reproduced by the model. The simulations revealed that the ankle angle was relatively sensitive to stiffness and dampness of the landing mat, the ankle loading rate increased 26% when the stiffness was increased by 30%, and the changing of dampness had notable effect on horizontal ground reaction force and foot velocity. Further, the peak joint-reaction force and joint torque were more sensitive to friction than to stiffness and dampness of landing mat. Finally, ankle muscles would dissipate about twice energy (189%) when the friction was increased by 30%. Conclusion: Loads to ankles during landing would increase as the stiffness and dampness of the landing mat increase. Yet, increasing friction would cause a substantial rise of the ankle internal loads. As such, the friction should be a key factor influencing the risk of injury. Unfortunately, this key factor has rarely attracted attention in practice.
EN
Taekwondo is famous for its powerful kicking techniques and the roundhouse kick is the most frequently used one. In earlier literature, the influence of a physical target (exiting or not) on kicking power generation has not been given much attention. Therefore, the aim of this study was to investigate the kinematics of roundhouse kick execution and its factors related to power generation. 6 ITF taekwondo practitioners voluntarily participated in this study. They were asked to perform kicks with and without a physical target. The first kick aimed at breaking a board while the second one was a kick into the air. A Smart-D motion capture system (BTS S.p.A., Italy) was used to quantitatively determine their kinematic characteristics during each kick. The main findings showed that kicks aiming at a breaking board were significantly slower than kicks without a physical target (maximal kick-foot velocities were 10.61 ± 0.86 m/s and 14.61 ± 0.67 m/s, respectively, p < 0.01), but the kicking time of the former was shorter (0.58 ± 0.01 s and 0.67 ± 0.01, respectively, p < 0.01). The results suggest that a physical target will negatively influence the kick-foot velocity, which is not necessarily a disadvantage for creating a high quality kick. Possible motor control mechanisms are discussed for the phenomenon. The study made it clear: trainings with and without physical targets would develop different motor control patterns. More studies are needed for identifying the effectiveness of different controls and efficiencies of their training.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.