Wyniki wyszukiwania - BazTech

1

Wear Process Analysis of the Polytetrafluoroethylene/Kevlar Twill Fabric Based on the Components’ Distribution Characteristics

Gu D., Fan B., Li F., Yang Y., Chen S.

Autex Research Journal

|

2017

|

Vol. 17, no. 4

295--302

EN

Polytetrafluoroethylene (PTFE)/Kevlar fabric or fabric composites with excellent tribological properties have been considered as important materials used in bearings and bushing, for years. The components’ (PTFE, Kevlar, and the gap between PTFE and Kevlar) distribution of the PTFE/Kevlar fabric is uneven due to the textile structure controlling the wear process and behavior. The components’ area ratio on the worn surface varying with the wear depth was analyzed not only by the wear experiment, but also by the theoretical calculations with our previous wear geometry model. The wear process and behavior of the PTFE/Kevlar twill fabric were investigated under dry sliding conditions against AISI 1045 steel by using a ring-on-plate tribometer. The morphologies of the worn surface were observed by the confocal laser scanning microscopy (CLSM). The wear process of the PTFE/Kevlar twill fabric was divided into five layers according to the distribution characteristics of Kevlar. It showed that the friction coefficients and wear rates changed with the wear depth, the order of the antiwear performance of the previous three layers was Layer III>Layer II>Layer I due to the area ratio variation of PTFE and Kevlar with the wear depth.

2

Superconducting Wind Turbine Generators

Pan Y., Gu D.

Transactions on Environment and Electrical Engineering

|

2016

|

Vol. 1, No. 3

9--15

EN

Wind energy is well known as a renewable energy because its clean and less polluted characteristic, which is the foundation of development modern wind electricity. To find more efficient wind turbine is the focus of scientists around the world. Compared from conventional wind turbines, superconducting wind turbine generators have advantages at zero resistance, smaller size and lighter weight. Superconducting wind turbine will inevitably become the main trends in this area. This paper intends to introduce the basic concept and principle of superconductivity, and compare form traditional wind turbine to obtain superiority, then to summary three proposed machine concept.While superconductivity have difficulty in modern technology and we also have proposed some challenges in achieving superconducting wind turbine finally.

3

A Wear Geometry Model of Plain Woven Fabric Composites

Gu D., Yang Y., Chen S., Su W.

Autex Research Journal

|

2014

|

Vol. 14, no. 3

168--173

EN

The paper g describes a model meant for analysis of the wear geometry of plain woven fabric composites. The referred model consists of a mathematical description of plain woven fabric based on Peirce’s model coupled with a stratified method for the solution of the wear geometry. The evolutions of the wear area ratio of weft yarn, warp yarn and matrix resin on the worn surface are simulated by MatLab software in combination of warp and weft yarn diameters, warp and weft yarn-to-yarn distances, fabric structure phases (SPs). By comparing theoretical and experimental results from the PTFE/Kevlar fabric wear experiment, it can be concluded that the model can present a trend of the component area ratio variations along with the thickness of fabric, but has a inherently large error in quantitative analysis as an idealized model.

4

Risk forecast of spontaneous combustion of sulfide ore dump in a stope and controlling approaches of the fire

Wu C., Li Z., Yang F., Hu H., Gu D.

Archives of Mining Sciences

|

2008

|

Vol. 53, no 4

565-579

EN

In this paper, a set of reliable devices and flowchart used for testing the potential of spontaneous combustion of sulfide ores (SOSC) are presented. An effective assessment method which depends upon the fire index system for evaluating the risk of SOSC in amining stope is introduced. To get more detailed information on self-heating situation in the ore dump at various period, the surface temperature on the ore dump is measured by an infra image apparatus and the temperature in the ore dump is analyzed both by ANSYS and FLUENT software. These results are visual and effective for applying correct measures for preventing the fire-breeding. Also, a group of chemical agents for abating the oxidized velocity are invented and can be sprayed into the ore dump. By integrating with all technical approaches described in above and using them for dealing with various practical conditions, the risk of SOSC in a stope can be effectively controlled.

PL

W niniejszym referacie, opisane zostały niezawodne urządzenia oraz schematy działań służące do badania potencjalnego samozapalenia się rudy siarczanu (SOSC). Przedstawiona została skuteczna metoda oceny służąca oszacowaniu ryzyka SOS C w przodku, która zależy od systemu wskaźnika pożarowości. Aby uzyskać bardziej szczegółowe informacje dotyczące samoogrzewania się hałdy rudy w różnych okresach, temperatura powierzchniowa na hałdzie mierzona jest za pomocą przyrządu na podczerwień, natomiast temperatura wewnątrz hałdy analizowana jest przy użyciu oprogramowania typu ANSYS oraz FLUENT. Wyniki tych badań są widoczne i użyteczne w celu zastosowania odpowiednich środków zapobiegających powstawaniu ognia. Wynalezione również zostały środki chemiczne służące spowolnieniu procesu utleniania, które mogą zostać rozpylone po powierzchni hałdy. Połączenie oraz praktyczne wykorzystanie wszystkich wyżej opisanych metod, może zapewnić efektywne kontrolowanie ryzyka samoistnego zapalenia się rudy siarczanu w przodku.