Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 11

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
1
EN
The paper presents the results of the design analysis and experimental investigations of the microturbine set consisting of the microturbine with partial admission and permanent magnet generator. The microturbine was designed for operation with the vapour of ethanol as a working fluid. Microturbine unit was tested for different parameters of the working fluid and varying the electrical load. The examples and the comparison between experiment results and numerical simulations are shown and discussed in the paper.
EN
This paper presents the influence of geometry simplification on the results obtained in the computational fluid dynamics simulation. The subject of simulation was part of the honeycomb seal located at the inlet to high pressure part of a steam turbine. There were three diferent geometrical models assumed in the calculations. First one was two-dimensional case and two others were three-dimensional, one with the radius of curvature and one without. Numerical simulations were performed for 15 sets of boundary conditions to compare flow characteristics for each geometrical case.
PL
Przeprowadzono analizę dla układów kogeneracyjnych z mikroturbinami wykorzystującymi ciepło odpadowe z silników tłokowych. Rozważono cztery główne źródła ciepła odpadowego z silników tłokowych: spaliny wylotowe, woda chłodząca silnik, olej smarny i ciepło z systemu turbodaładowania. Obliczenia przeprowadzono dla silników General Electric Jerbacher typów: J320 GS-C25 i J416 GS-B05. Uwzględniono różne czynniki robocze siłowni (zarówno “suche”, jak i “mokre”) oraz różne cycle termodynamiczne. Nasze badanie wykazały, że wykorzystując ciepło odpadowe silników, można nie tylko podgrzewać wodę, ale także wytwarzać energię elektryczną. W ten sposób można podnieść sprawność ogólną wytwarzania energii elektrycznej nawet o 20%.
EN
The analysis was carried out for Combined Heat and Power generation systems with micro-turbines power plants working on heat rejected from the reciprocating engine. There are four main sources of heat rejected from the stroke engines: exhaust gases, engine cooling water, lubricating oil and intercooler. The calculations were performed for GE Jerbacher engines of J320 GS-C25 and J416 GS-B05 types. We considered different working media (both wet and dry fluids) and different thermodynamic cycles. Our results proved that using the heat rejected from the engines is possible not only to warm up water but also to produce some electric power and, in this way, increase the total electric output by even 20%.
EN
Geostatistical methods for 2D and 3D modelling spatial variability of selected physicochemical properties of biogenic sediments were applied to a small valley mire in order to identify the processes that lead to the formation of various types of peat. A sequential Gaussian simulation was performed to reproduce the statistical distribution of the input data (pH and organic matter) and their semivariances, as well as to honouring of data values, yielding more ‘realistic’ models that show microscale spatial variability, despite the fact that the input sample cores were sparsely distributed in the X–Y space of the study area. The stratigraphy of peat deposits in the Ldzań mire shows a record of long-term evolution of water conditions, which is associated with the variability in water supply over time. Ldzań is a fen (a rheotrophic mire) with a through-flow of groundwater. Additionally, the vicinity of the Grabia River is marked by seasonal inundations of the southwest part of the mire and increased participation of mineral matter in the peat. In turn, the upper peat layers of some of the central part of Ldzań mire are rather spongy, and these peat-forming phytocoenoses probably formed during permanent waterlogging.
PL
Osady neogeńskie w odkrywkach KWB Konin S.A. są silnie zdeformowane glacitektonicznie. Analizie strukturalnej poddano fałdy i nsunięcia wykształcone w skali makro, których rozmiary dochodzą do kilkuset metrów, a wysokość do kilkudziesięciu metrów. Orientacja tych deformacji wskazuje, że powstały one w czasie kilku zlodowaceń, transgredujących z północy, a wyjątkowo z północnego zachodu.
EN
Neogene deposits in the Konin lignite open-casts are strongly deformed due to glaciotectonic processes. Some folds and thrusts were subjected to the structural analysis. Their sizes are reaching up to a few hundred meters and height up to several dozen meters. Orientation of these deformations shows that they came into existence during a few glaciations coming from the north, exceptionally from the north-west.
PL
Podjęto próbę rekonstrukcji pól odkształceń/ paleonaprężeń, w jakich rozwijały się uskoki i spękania tnące osady glacifluwialne w dwóch wybranych kemach Polski środkowej. Do badań wybrano kemy w Chabierowie i Górze, reprezentujące tzw. kemy z wyciśniętym jądrem, powstałe w czasie zaniku lokalnego lobu lodowcowego zlodowacenia warty. Podstawą do rekonstrukcji pola odkształceń/paleonaprężeń były analizy geomorfologiczna oraz mezostrukturalna. Zdefiniowano przebieg dłuższych osi morfologicznych kemów oraz szeregu lineamentów topograficznych w ich obrębie. Określono wzajemne relacje między tymi formami a przebiegiem głównych elementów paleogeografii zlodowacenia warty oraz struktur podłoża podplejstoceńskiego. Analizę mezostrukturalną oparto na wynikach pomiarów 112 spękań, w tym 78 uskoków. Zaobserwowano obecność uskoków normalnych, wysokokątowych odwróconych oraz spękań układających się w systemy podwójnie sprzężonych struktur o symetrii rombowej. Płaszczyzny symetrii były podstawą do wyznaczenia przebiegu osi odkształceń/paleonaprężeń oraz ich charakteru. Architektura uskoków i spękań w kemie w Chabierowie odwzorowuje pole odkształceń jakie mogło rozwijać się w trakcie zaniku mas lodowych o wyraźnej pierwotnej anizotropii. Rozwój uskoków i spękań w kemie w Górze był synkinematyczny z rozwojem fałdu diapirowego w jądrze formy.
EN
The reconstruction of the character of paleostress/strainfields in which kame deposits were faulted and jointed is the object of present study. Two kame landforms with diapir folds within their cores were analysed. They are located in middle part of the Polish Lowland and represent landforms developed during decay of local lobe of the Wartanian Glaciation ice-sheet. Fault and joint kinematics has been interpreted on the basis of mesostructural analysis. Geomorphologic analysis played the secondary role too. Trends of long morphological axes and architecture of topographical lineaments within kame landforms were studied. The mesostructural analysis of faults and joints within kame deposits shows that these structures form a biconjugate systems with orthorombic symmetry. The symmetry planes were obtained from fault and joint spatial arrangement. The horizontal principal strain/palaeostress axes were reconstructed in the same direction as strike of the symmetry planes. Faulting and jointing within the kame in Góra were synkinematic with development of diapir fold in its core. Architecture of faults and joints with in the kame in Chabierów reflects the strain field which could develop during decay of glacial ice masses with characteristic joint and crevasse pattern.
PL
Przedmiotem artykułu jest analiza strukturalno-kinematyczna kompleksu deformacji glacitektonicznych, wyodrębniającego się jako osobne piętro strukturalne w strefie rowu Kleczewa (elewacja konińska). Analiza makrostrukturalna pozwoliła zdefiniować trzy podjednostki strukturalne A, B i C. Analiza strukturalno-kinematyczna mezostruktur wykazała znaczące różnice w rozwoju strukturalnym poszczególnych podjednostek. Podjednostkę strukturalną A reprezentują głównie fałdy i nasunięcia, rozwijające się w polu kompresji horyzontalnej przed czołem nasuwającego się lądolodu zlodowacenia Odry. Deformacjom podlegały głównie osady starsze od zlodowacenia Odry, tj. iły formacji poznańskiej miocenu górnego, węgle brunatne formacji poznańskiej miocenu środkowego a podrzędnie gliny T1 zlodowacenia południowopolskiego. Niewielki udział w deformacjach miały dolne partie serii glacifluwialnej z Jóźwina z fazy anaglacjalnej zlodowacenia Odry. Podjednostka strukturalna B obejmuje wyższe partie serii glacifluwialnej z Jóźwina, które przykrywają, a miejscami rozcinają erozyjnie, struktury podjednostki A. Osady podjednostki B są pocięte uskokami normalnymi powstałymi w efekcie pionowych przemieszczeń podścielających je struktur podjednostki A. Podjednostka strukturalna C jest reprezentowana głównie przez struktury wskazujące na ścinanie proste w płaszczyźnie (sub)horyzontalnej w warunkach subglacjalnych. Obejmuje ona glinę T2 zlodowacenia Odry oraz strefy kontaktu z podłożem. Pod względem mezostrukturalnym glina T2 reprezentuje melanż typu block in matrix. Podrzędną rolę w rozwoju strukturalnym podjednostki C odgrywała ekstensja horyzontalna w efekcie aktywizacji makrostruktur podłoża w trakcie rozpadu lądolodu zlodowacenia Odry.
EN
The complex of glaciotectonic deformations within Kleczew graben zone (Konin Elevation) is the object of present study. The analysis of macrostructures was the basis for definition of three structural sub-units A, B and C. Mesostructures were studied in detail within each of these sub-units. The structural sub-unit A is mainly represented by folds and thrusts produced by horizontal compression in front of advanced Odranian ice-sheet. These structures developed mainly within the Upper Miocene Poznań Formation clays, the Middle Miocene Poznań Formation brown coals and the South Polish glacial tills. The structural sub-unit B is composed of the glaciofluvial series from Jóźwin of the Odranian Glaciation, which cover discordantly deformed sediments of the sub-unit A. The sediments of the sub-unit B are dissected by lot of normal faults and high angle reverse faults. These structures were produced by horizontal extension related to vertical uplift of structures of sub-unit A. The structural sub-unit C is represented mainly by glacial till T2 of the Odranian Glaciation and contact zone between this till and the older sediments. The style of deformation of these sediments shows (sub)horizontal simple shearing under subglacial conditions. Within the complex of glaciotectonic deformations, the horizontal extension was the youngest deformation event produced by vertical uplift of the basement during decaying of the Odranian ice-sheet.
EN
This paper presents experimental investigations which made it possible to determine dynamic coefficients of labyrinth over-shroud seal of a model air turbine. The coefficients associate pressure forces with turbine rotor displacement, velocity and acceleration respective to turbine casing (linear model) and play important role in analyzing turbine-set dynamics. The obtained results indicated that involving serious errors can be expected in the case of application of the simplification consisting in neglecting inertia coefficients, proposed in the literature. It was simultaneously demonstrated that seals can be also met of weak damping qualities, for which to neglect damping coeffcients is allowable.
EN
Normal faults of different orientations appear to be the youngest manifestations of faulting in the Carpathian Foredeep which is filled with Lower to Middle Miocene sediments. Structural studies of the Late Miocene–Pliocene(?) fresh-water molasses of the Witów Series and the overlying Late Pleistocene loessial complex provide a possibility to reconstruct the Late Neogene to Recent (?) stress field in the central part of the Polish Carpathian Foredeep. Strata of such a young age are very rare in the foredeep, thus providing a key record of structural deformation during the latest stages of orogenic evolution of the Carpathian orogen. The molasses are cut by joints, and normal and strike-slip faults, formed in two successive events: (1) a syn-depositional one for the molasses (Late Miocene–Pliocene?), proceeding under NNW–SSE to N–S-oriented horizontal compression, possibly coeval with reactivation of a NE-striking sinistral fault of the Kurdwanów–Zawichost Fault Zone in the basement; (2) a post-depositional one for the molasses (Pliocene to Middle Pleistocene) during N–S to NE–SW-oriented extension, and (3) both syn- and post-depositional ones for the loessial complex (Late Pleistocene). In the first event, reactivation of the NE-striking sinistral fault led to formation of N–S-oriented joints, as well as NW-striking dextral, and NNW-trending normal faults. In the second event, both W–E and NW–SE – oriented joints andWNW-striking normal faults were formed. The latter most probably originated due to reactivation of the Early Palaeocene WNW- and NW-striking normal faults in the basement. In the third event, both NE–SW and NW–SE-oriented joints and NE-striking normal faults formed as a result of reactivation of the SW- and WSW-striking faults in the basement. Therefore, normal faults detected in the Carpathian Foredeep appear to be a result of different successive events. This extensional episode lasted at least to the Late Pleistocene. We also provide evidence for the recent, N- to NNE-directed, tectonic compressive stress, typical for that segment of the Carpathian arc. This stress resulted in the formation of an orthogonal system of joints striking N–S and W–E, produced during
PL
W niniejszej pracy zasygnalizowano problem wzajemnej relacji pomiędzy deformacjami glacitektonicznymi osadów młodszego trzeciorzędu i starszego czwartorzędu a głębszym podłożem. Podstawą teoretyczną dla takich rozważań jest zintegrowany model geodynamiczny dla obszarów zlodowaceń plejstoceńskich, w których szczególnie istotnym elementem jest znaczący udział naprężeń horyzontalnych wtórnie generowanych przez statyczne obciążenie lądolodem. Ma to Duże znaczenie dla tektoniki przesuwczej. Obszarem testowym wybranym do tego celu jest elewacja konińska przylegająca do strefy TESZ. Przeprowadzona została analiza porównawcza planów strukturalnych: staroalpejskiego w strefie dyslokacyjnej Gopło-Ponętów, młodoalpejskiego w skali całej elewacji i glacitektonicznego w rowie Kleczewa. Zestawione mapy morfostrukturalne, szkic tektoniczny, wyniki pomiarów mezostruktur pozwoliły wydzielić tzw. odrzańską jednostkę kinestratygraficzną. Superpozycja dwóch planów strukturalnych w obrębie tej jednostki na obecnym etapie badań jest trudna do jednoznacznego wyjaśnienia. Autor wskazuje na możliwość generowania jednego z zespołu struktur przez czynnik tektoniczny choć nie wyklucza jego współudziału w przypadku drugiego zespołu.
EN
This paper present the problem of interrletionships between glaciotectonic deformations of shallow unconsolidated sediments and deeper crustal and subcrustal structures. The integrated geodynamical model for glaciated area forms the basis of this idea. The particular contribution of horizontal radial stresses is important element of this model. They are induced by flexural bending of crust in the ice sheet centre in effect of static loading/deloading glacial cycle. Some authors underline the importance of this phenomena in strike-slip tectonic area. This research problem was tested in the Konin elevation area, which borders on two important dislocation zones. The first is Gopło-Ponętów situated on the NE side within TESZ. The second is represented by Poznań-Rzeszów lineament zone located in SW. Investigations where based on: a) tectonic sketch on the strenght of literature about deeper tectonic and neotectonic structures, b) map of glaciotectonic morphostructures prepared on the grounds of borehole dates, c) geological sketch of trust glaciotectonic zone, which is composed of alternately brown coal and clay series units, based on direct observations in open mine outcrops, d) statistical analysis of mesostructures: folds, cleavage, faults, clast fabric. These all elements show a very pronounced similarity of structural directions. Glaciotectonic structures was divided to three kinetostratigraphic units, from which the middle named odranian play dominated role in upper Tertiary and lower Quaternary geology. the main lithological unit of this one is glacial deformation till of T2 litostratigraphic level. There is very important superposition of two structural plans, which show different tectonic transport directions. The first to SSW is treated as glacialy induced. The second to ESE is problematic. Author suppose tectonic nature of this. Time dependence of superposition is not clear at this phase of research.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.