Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 21

Liczba wyników na stronie
first rewind previous Strona / 2 next fast forward last
Wyniki wyszukiwania
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 2 next fast forward last
PL
W pracy przedstawiono charakterystyczne wyniki badań modyfikacji warstwy wierzchniej cegły pochodzącej z obiektów zabytkowej Łodzi przemysłowej. Ten proces przeprowadzono za pomocą światła lasera rubinowego pracującego w układzie generacji swobodnej. Jako substancji modyfikujących użyto węglików tytanu i wolframu w postaci drobno ziarnistych proszków. Zaobserwowano, że w obszarze laserowego oddziaływania węgliki te zostały wtopione w warstwę wierzchnią (kompozyt) a także obszary, w których występuje zjawisko laserowego platerowania.
EN
The work presents the results of experimental examinations of the chemical composition of the brick samples (covered of titanium carbide or tungsten carbide) before laser beam interaction. The samples are genesis from Łódź old age buildings, placed Wólczańska 215 street. The scanning electron microscopy (SEM) end Energy Dispersive X-ray (EDX) methods were used. Large differences between chemical composition of the surface layer modificated by laser beam and before laser exposition were observed.
PL
W pracy przedstawione zostały wyniki badań eksperymentalnych w tunelu aerodynamicznym z przeszkodą gęstej perforacji, wywołującą efekty turbulentnego przepływu. Pomiary prowadzone były przy wykorzystaniu wąskiej wiązki światła laserowego usytuowanej w różnych odległościach od ekranu. Sondujące wiązki laserowe miały kierunek prospopadły do strumienia powietrza. Analiza charakteru przepływu turbulentnego prowadzona była po stronie napływu i odpływu.
EN
The paper presents the results of experimental studies of turbulence flow induced by obstacle characterized by dense perforation. Measurements were conducted in wind tunnel by means of narrow laser beam. Direction of the laser beam was perpendicular to air stream. Analyses of turbulence characteristic were carried out in inflow and outflow zone of the obstacle.
PL
W pracy przedstawiono wyniki badań fotonowego czyszczenia powierzchni cegły pochodzącej z obiektów zabytkowej Łodzi przemysłowej. Do monitorowania tego procesu zaproponowano zjawisko odbicia światła lasera He-Ne od powierzchni tego materiału. Zaobserwowano zależność między liczbą „strzałów" w to samo miejsce próbki, a natężeniem i parametrami laserowych speckli w kierunku zwierciadlanego odbicia. Ta zależność może być przydatna do oszacowania stopnia wyczyszczenia powierzchni próbki za pomocą nanosekundowych impulsów lasera Nd:YAG.
EN
The work present the results of experimental examinations of the laser photon cleaning of the surface of ancient brick. Lasers (He-Ne) speckles are proposed to monitoring these phenomenon. The parameters of lasers speckles were analysed. Large differences between numbers of laser "shots" and parameters of lasers speckles were observed.
PL
W pracy przedstawiono charakterystyczne wyniki badań modyfikacji warstwy wierzchniej cegły pochodzącej z obiektów zabytkowej Łodzi przemysłowej. Proces modyfikacji przeprowadzono za pomocą światła lasera rubinowego pracującego w układzie generacji swobodnej. Jako substancji modyfikującej użyto węglika niobu w postaci proszku. W obszarze laserowego oddziaływania zaobserwowano obszary w których węglik niobu został wtopiony w warstwę wierzchnią a także obszary, w których występuje zjawisko laserowego platerowania.
EN
The work presents the results of experimental examinations of the chemical modification of the brick samples (covered of niobium carbide) before laser beam interaction. The samples are genesis from Łódź old age buildings, placed Wólczańska 215 street. The electron microscopy (SEM) end Energy Dispersive X-ray methods were used. Large differences between chemical composition of the surface layer melted by laser beam and before laser exposition were observed.
PL
W pracy przedstawiono charakterystyczne wyniki badań domieszkowania warstwy wierzchniej cegły pochodzącej z obiektów zabytkowej Łodzi przemysłowej. Proces domieszkowania przeprowadzono za pomocą światła lasera rubinowego pracującego w układzie generacji swobodnej. Jako substancji domieszkującej użyto węglika tantalu w postaci proszku. Zaobserwowano w obszarze laserowego oddziaływania obszary w których węglik tantalu został wtopiony w warstwę wierzchnią a także obszary, w których występuje zjawisko laserowego platerowania.
EN
The work presents the results of experimental examinations of the chemical composition of the brick samples (covered of tantalum carbide) before laser beam interaction. The samples are genesis from Łódź old age buildings, placed Wólczańska 215 street. The electron microscopy (SEM) end Energy Dispersive X-ray methods were used. Large differences between chemical composition of the surface layer melted by laser beam and before laser exposition were observed.
PL
W pracy przedstawiono mozliwości zastosowania światła laserowego do obserwacji kinetyki wirów drobnoskalowych.Prace eksperymentalne realizowano w tunelu aerodynamicznym, dzięki czemu możliwa była kontrola prędkości przepływu powietrza. Badania turbulentnego przepływu strugi powietrza opływającej przeszkodę prowadzono wykorzystując do tego celu wiązkę światła laserowego, przechodzącą przez badany obszar.
EN
The paper presents possible application of laser beam in observation of small vortices. The experimental research was conducted in wind tunnel. This allowed the air velocity to be controlled. Study of the turbulent flow of air stream around an object was performed with application of laser beam parameters.
PL
W pracy przedstawiono wyniki badań wpływu działania wiązki lasera Nd:YAG o długości fali 1060 nm, energii pojedynczego impulsu 500 mJ i czasie trwania 10 ns na parametry rozkładu natężenia speckli laserowych uzyskanych w wyniku odbicia spójnego światła wiązki lasera He-Ne od warstwy wierzchniej piaskowca.
EN
The paper presents the results of the research of the effect of the laser radiation of λ=1,06um, energy of 500mJ on the laser speckles. The analysis of laser speckle was carried out with the use of hell - neon laser, of wavelength was 630 nm.
PL
W pracy przedstawiono niektóre wyniki badań dotyczące skutków oddziaływania promieniowania emitowanego przez laser rubinowy z cienką warstwą węglików Ti, W, Nb i Ta naniesioną na powierzchnię próbek wykonanych z cegły, pochodzącej z zespołu zabytkowej zabudowy przemysłowej Łodzi. W badaniach składu chemicznego zmodyfikowanej warstwy wierzchniej stosowano spektrometrię EDX.
EN
The work presents the results of experimental examinations of the chemical composition of the brick samples (covered of metals carbide) before laser beam interaction. The samples are genesis from Łódź old age buildings, placed Wólczańska 215 street. The electron microscopy (SEM) end Energy Dispersive X-ray methods were used. Large differences between chemical composition of the surface layer melted by laser beam and before laser exposition were observed.
PL
W pracy przedstawiono wyniki badań składu chemicznego próbek cegły pochodzącej z zespołu zabytkowej zabudowy przemysłowej Łodzi, mieszczącej się przy ulicy Wólczanskiej 215. W badaniach stosowano spektrometrię EDX (Energy Dispersive X-ray). Zaobserwowano znaczne różnice składu chemicznego warstwy wierzchniej i wnętrza materiału.
EN
The work presents the results of experimental examinations of the chemical composition of the brick samples. The samples are genesis from Łódź old age buildings, placed Wólczańska 215 street. The Energy Dispersive X-ray method was used. Large differences between chemical composition of the surface layer and inside of the sample were observed.
PL
W pracy przedstawiono wyniki badań wpływu działania promieniowania laserowego o długości fali 1.06 μm i całkowitej dostarczonej energii 3500 mJ na skład chemiczny warstwy wierzchniej piaskowca.
EN
The paper presents the results of the research on the effect of laser radiation of λ=1,06 μm, total energy of 3500 mJ on the chemical analysis of the superficial layer of sandstone.
EN
Paper presents some results of the experimental investigations of the surface cleaning with the aid of photon's beam. The identification of the pollution was made by the X-ray microanalysis. The radiation reflected from the surface of the porous body (laser speckles) enables the diagnosis of the surface degree of cleanness.
EN
In these studies the Nd:YAG laser, operated at the fundarnental wavelength [lambda]= 1,06 žm, was applied to remove superficial layers (which have thermal and absorption properties different than the base material) from the surface of Fe3%Si steel samples, For monitoring of the surface roughness of the modified base material, the radiation of the He-Ne laser (speckles) and the scanning electron microscope (SEM) were used.
EN
The new approach for the visual comfort assessment is proposed in that paper. It is based on the Total Daylight Index (TDI) methodology taking into account the daylight transmission, distribution and utilization. All parameters are determined by climate, urban context, architecture of the building envelope and the specific indoor design. These individual parameters strongly determined the light illuminance inside the building and the indoor visual comfort level. The required TDI value relates the illuminance level inside the building and can be used as a initial guideline at the beginning of the architecture design process.
14
Content available remote Propagation of laser light in the moving air
EN
The paper presents theoretical analysis and experimental results which show the possibility of the application of laser beam in examination of the changes of physical parameters of the air flow disturbed by the presence of solid objects.
PL
W pracy przedstawiono analizę teoretyczną i wyniki eksperymentalne pokazujące możliwości wykorzystania wiązki lasera do analizy zmian parametrów fizycznych przepływającego powietrza, spowodowanych obecnością obiektów wprowadzających zaburzenia tego przepływu.
EN
Manufacturing of concrete resistant to freezing and thawing requires an in de understanding of the mechanisms triggering deterioration. Despite numerous attempts, a definitive and fully explanatory model has yet to be formulated. This paper presents part of study which analyzes influence of pore structure of cement-based matrix on the frost durability of Ordinary Portland Cement mortar is analysed. An empirical investigation was carried out on five air-entrained and one non-air- entrained mortar (with water-to-binder (W/B) ratio 0.4) subjected up to 732 freezing/thawing (Frr) cycles. Various concentrations of air-entraining admixture were used to differentiate the pore-structure of mortar. The examination of the microstructure and composition of the cement paste was performed by means of Scanning Electron Microscope (SEM) and Mercury Intrusion Porosimetry (MIP). Presented results demonstrate the magnitude of alterations to pore configuration due to pure freezing/thawing and its effect on the mechanical characteristics (compressive/flexural strength). Finally, on the grounds of apparent transformation. a generic pore size distribution of frost resistant cement-matrix is proposed.
PL
W pracy przedstawiono charakterystyczne wyniki badań dotyczące laseroego usuwania zanieczyszczeń i modyfikacji warstwy wierzchniej za pomocą impulsowego promieniowania laserowego. Obiektem badań był szereg próbek cegły pochodzącej z Kościoła o.o. Jezuitów w Łodzi. W badaniach stosowano metody mikroskopii elektronowej (SEM) i mikroanalizy rentgenowskiej.
EN
Restoration of ancient artwork and architecture requires even more effective cleaning techniques than are currently available. Laser cleaning appears to be a suitable method for removing surface contaminants from porous materials. This paper presents some effects of laser beam interaction with cleam and contaminated surface of brick.The effects of the laser beam interaction with clean and contaminated surface of brick. The effects of the laser beam interaction have been examined by the scanning electron microscopy and X-ray microanalysis.
EN
Effect of some design solutions of green house architecture on inner surface insolation has been analysed. The results of beam solar radiation and energy of direct solar radiation for the coldest and warmest months in the year have been presented. Results of computations done for Polish climatic conditions have shown the beam solar radiation decrease of 54 - 63% in summer, and 10 - 12% in winter for south or west-south orientations of the green house.
EN
This paper uses the numerical simulation to investigate the turbulent flow around two high-rise buildings in proximity on the pedestrian's level at the different relative hights, gaps and wind velocities. The K-e model was used to simulate turbulence effects.
first rewind previous Strona / 2 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.