Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 23

Liczba wyników na stronie
first rewind previous Strona / 2 next fast forward last
Wyniki wyszukiwania
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 2 next fast forward last
1
Content available remote Load-Bearing Actuator with Permanent Magnet for Transport of Raili
EN
A new solution for transporting long ferromagnetic bodies is presented, based on a system of permanent magnets whose attractive force at the moment of releasing the load is reduced by pulse magnetic field produced by appropriately arranged coils. The continuous mathematical model of the device is solved numerically. Its operation characteristics illustrated by an example are evaluated and discussed.
PL
W artykule przedstawiono metodę transportu długich obiektów ferromagnetycznych. W rozwiązaniu wykorzystane zostało zjawisko osłabiania siły z jaką magnesy trwałe przyciągają obciążenie, poprzez wytworzenie impulsowego pola magnetycznego, wytworzonego przez odpowiednio ustawione cewki. Zastosowano model matematyczny urządzenia o dziedzinie ciągłej, który poddano analizie numerycznej. Przedstawiono i omówiono wynikowe charakterystyki pracy.
EN
Experimental verification of thermoelastic effect is performed with the aim to calibrate the device for accurate setting of position built in our laboratory. The time evolution of temperature and dilatation of the action element was measured for a sufficient spectrum of field current parameters (amplitude and frequency). The resultant graphs were compared with results obtained by numerical simulation.
PL
W pracy opisano eksperymentalną weryfikację modelu numerycznego nagrzewania indukcyjnego. Zmiana rozmiaru elementu wykonawczego została zmierzona dla szerokiego zakresu amplitudy i częstotliwości prądu wzbudzającego. Wyniki uzyskane z pomiarów zostały porównane z rezultatami symulacji numerycznych.
3
EN
A complete proposal of induction shrink fit between a disk and shaft is presented. The proposal consists of two parts. First, a suitable interference between both parts has to be suggested that is be able to transfer the required mechanical torque at a permissible mechanical stress. Then, the process of induction heating of the disk before its putting on the shaft is mapped. The model of the process respecting all nonlinearities is solved numerically in the hard-coupled formulation. The methodology is illustrated by the example of induction shrink fit between the active wheel of gas turbine and shaft.
4
Content available Model of induction shrink fit between disk and shaft
EN
A complete proposal of induction shrink fit between a disk and shaft is presented. The proposal consists of two parts. First, a suitable interference between both parts has to be suggested that is be able to transfer the required mechanical torque at a permissible mechanical stress. Then, the process of induction heating of the disk before its putting on the shaft is mapped. The model of the process respecting all nonlinearities is solved numerically in the hard-coupled formulation. The methodology is illustrated with the example of induction shrink fit between the active wheel of gas turbine and shaft.
5
Content available remote Modeling of Induction Shrink Fit of Action Wheel in Gas Turbine
EN
Induction shrink fit in a gas turbine is modeled. The fit is realized by pressing of a heated steel wheel carrying the blades on shaft and its purpose is to transfer a relatively high torque in specific operation conditions. The paper deals with the numerical solution of the process that represents a nonlinear and nonstationary coupled problem characterized by interaction of magnetic field, temperature field and field of thermoelastic displacements. The methodology is illustrated by a typical example whose results are discussed.
PL
Zaproponowano modelowanie indukcyjnego dopasowania koła w turbinie gazowej. Dopasowanie to polega na naprężaniu rozgrzanego koła w celu ułatwienia transferu dużego momentu. Przedstawiono model numeryczny procesu uwzględniający pola magnetyczne i temperaturpowe oraz odkształcenie termoelastyczne.
6
Content available remote Contact Problem of Disk on Shaft Fixed by Induction Shrink Fit
EN
The problem of shrink fit between the disk and shaft is solved. The shrink fit realized by induction heating must transfer the prescribed torque and power. Both disk and shaft are considered elastic. The first step of the task is to find appropriate dimensions of the disk and interference. The second step is to suggest the parameters of its induction heating. The methodology is illustrated by a typical example.
PL
W artykule rozwiązano problem pasowania kurczowego między tarczą a wałem. Pasowanie kurczowe zrealizowane zostało metodą indukcyjną – musi ono przenieść założone moment i moc. Zarówno tarcza jak i wał zostały potraktowane jako elastyczne. Pierwszym krokiem w rozwiązaniu zadania jest znalezienie dogodnych rozmiarów tarczy. Drugim krokiem jest zasugerowanie parametrów jej nagrzewania indukcyjnego. Ta metodyka została zilustrowana typowym przykładem. (Problem kontaktu tarczy na wale poprzez zastosowania pasowania kurczowego)
7
Content available remote Actuator with Ferromagnetic Plunger Working in Ferrofluidic Liquid
EN
An electromagnetic actuator with a plunger moving in a ferrofluidic liquid is suggested and modeled. The paper analyses its principal operation characteristics.
PL
Zaproponowano nowy siłownik (aktuator) z popychaczem poruszającym się w cieczy typu ferrofluid. W artykule opisano główne cechy tego urządzenia.
EN
A novel type of pulsed electromagnetic actuator is presented and modeled. Its plunger consists of two separate (but mutually connected) cylindrical parts made of classical magnetic material and permanent magnet, respectively, and its motion is controlled by short current pulses of the defined amplitude. The paper starts with the definition of the technical problem and formulation of its mathematical model. This model is then solved numerically and the whole methodology is illustrated by a typical example. It is shown that unlike the classical devices the above actuator exhibits high holding force and low consumption of energy.
EN
A novel type of pulsed electromagnetic actuator is presented and modelled. Its plunger consists of two cylindrical parts made of classical magnetic material and permanent magnet, respectively. Its motion is controlled by short current pulses of the prescribed amplitude. The paper starts with the definition of the technical problem and formulation of its mathematical model. This model is then solved numerically and the whole methodology is illustrated by a typical example, whose results are discussed.
EN
A new approach to modeling of induction heating of thin plates is presented. The model of magnetic field is based on the electric vector potential T and the distribution of temperature is described by a modified equation including heat sources and sinks. The thermoelastic displacements are also respected. The methodology is illustrated by an example whose results are discussed.
PL
W artykule przedstawiono nowe podejście do modelowania grzania indukcyjnego w cienkiej płytce. Model pola magnetycznego wykorzystuje elektryczny potencjał wektorowy T a rozkład temperatury opisany jest zmodyfikowanym równaniem, zawierającym źródła ciepał i wydatki ciepła. Uwzględniono również przesunięcia termoelastyczne. Metodyka tego podejścia została zilustrowana przykładem obliczeniowym z dyskusji wyników. (Model monolityczny grzania indukcyjnego cienkiej płytki przewodzącej z uwzględnieniem przesunięcia termoelastycznego).
11
Content available remote Mathematical model of the electromagnetic accelerator
EN
The model of the electromagnetic accelerator is offered as a solenoid with ferromagnetic core. The mathematical model is formed on the basis of the unique magnetic flux without dividing into a basic flux and leakage flux. The mathematical model of accelerator is formed in the coordinates of contour magnetic fluxes and currents of branches as a system differentially eventual equations.
PL
Analizowano model przyśpieszeniomierza elektromagnetycznego w postaci solenoid z rdzeniem ferromagnetycznym. Analizowano strumień magnetyczny bez podziału na strumień cewki i strumień rozproszony.
EN
Possibilities of using the magnetohydrodynamic (MHD) effect for pumping molten salts in cooling loops of high-temperature nuclear reactors are analyzed. Two basic ways of producing magnetic field in the pump (saddle coils and permanent magnets) are evaluated with respect to the total Lorentz force and resultant pumping head of the device. The corresponding mathematical models are solved numerically
PL
W pracy przeanalizowano możliwość zastosowania efektu magnetohydrodynamicznego (MHD) do pompowania płynnych soli w obwodach chłodzących wysokotemperaturowych reaktorów jądrowych. Zbadano dwa podstawowe sposoby wytwarzania pola elektromagnetycznego (cewki siodłowe i magnesy trwałe) pod kątem całkowitej siły Lorentza i wytwarzanego ciśnienia względnego. Do porównania wykorzystano numeryczny model efektu MHD.
13
Content available remote Electromagnetic-thermoelastic actuator for accurate wide-range setting of position
EN
A novel actuator for accurate setting of position is presented, allowing a wide-range shift. While the rougher setting of position is realized electromagnetically, its fine tuning is performed on the principle of thermoelastic dilatation of the nonferromagnetic part of the plunger. The complete mathematical model of the problem (representing a triply coupled task) is solved numerically. The methodology is illustrated by an example whose results are discussed.
PL
W artykule przedstawiono nowy projekt aktuatora o szerokim zakresie przemieszczeń. Zgrubne pozycjonowanie jest realizowane za pomocą sterowania elektromagnetycznego, natomiast precyzyjne dostrojenie pozycji osiąga się przez termoelastyczną dylatację nieferromagnetycznego elementu trzpienia. Rozwiązano numerycznie kompletny matematyczny model urządzenia (uwzględniający sprzężenia pól). Zaprezentowana metody została zilustrowana przykładowymi obliczeniami, których wyniki zostały starannie przeanalizowane.
EN
A complete mathematical model of an electromagnetic friction clutch is presented, whose numerical solution provides its basic operation characteristics. The clutch represents a part of various devices working with the movable plunger and its purpose is to fix it in a prescribed accurate position. Its application is illustrated by a typical example.
15
EN
Possibilities of pumping molten metals and salts (as cooling agents in nuclear reactors) by magnetohydrodynamic (MHD) pumps with permanent magnets are investigated. The principal attention is paid to the steady-state movement of these quenchants in the closed cooling loops described by the balance of the Lorentz force produced by the pump and hydrodynamic drag forces. The methodology is illustrated on two typical examples whose results are discussed.
PL
W artykule przedstawiono wyniki badań nad możliwością zastosowania pomp magnetohydrodynamicznych (MHD). Najwięcej uwagi poświęcono analizie stanu ustalonego ruchu medium chłodzącego w obiegach zamkniętych pod wpływem siły Lorentza generowanej przez pompę i sił oporu hydrodynamicznego. Metodykę badań zilustrowano dwoma typowymi przykładami, dla których przeprowadzono analizę wyników symulacji.
EN
Accurate setting of position based on thermoelastic effect produced by induction heating is suggested. Its controllability is reached by supplementary friction clutches that hold the dilatation element in the required position. The paper presents the arrangement of the device, its mathematical model and way of its numerical solution. The operation properties of the device are illustrated on an example whose results are discussed.
PL
W artykule zaproponowano konstrukcję urządzenia do dokładnego pozycjonowania wykorzystujące efekt termoelastyczny powstały w wyniku nagrzewania indukcyjnego. Sterowanie urządzeniem jest możliwe dzięki wykorzystaniu dodatkowych sprzęgieł ciernych które utrzymują element ruchomy w odpowiedniej pozycji. Oprócz idei urządzenia przedstawiono także jego model matematyczny i jego realizację numeryczną. Właściwości urządzenia zademonstrowano na przykładzie. Przedyskutowano wyniki symulacji.
EN
A methodology of designing axial magnetic clutch is presented. Except for the prescribed force, the clutch must satisfy certain requirements concerning its temperature rise and several other aspects. The methodology is illustrated by two examples.
EN
Induction heating of nonmagnetic cylindrical billets rotating in uniform magnetic field before their hot forming belongs to modern industrial technologies characterised by higher efficiency than classical ways of heating. The paper presents an integrodifferential model of the process. The suggested algorithm of calculation is illustrated by an example whose results are discussed.
PL
Indukcyjne nagrzewanie cylindrycznych detali wirujących w jednorodnym polu magnetycznym to nowoczesna technologia o wyższej efektywności niż klasyczne techniki nagrzewania. W artykule przedstawiono różniczkowo-całkowy model matematyczny procesu nagrzewania, zaproponowano algorytm symulacji numerycznych i przedyskutowano otrzymane wyniki.
EN
Heating of solid bodies in unbounded and unmoving gaseous media is characterized by comparable effects of the natural convection and thermal radiation even at relatively low temperatures. The paper unifies both these phenomena on the basis of the generalized convection that is quantified by an experimentally-theoretical algorithm. Its aspects are illustrated on an example.
PL
Nagrzewanie ciał stałych w nieograniczonych I nieruchomych środowiskach gazowych charakteryzowane jest poprzez konwekcję naturalna i radiację cieplną nawet przy stosunkowo niskich temperaturach. W pracy omówiono łącznie te dwa zjawiska jako konwekcję ogólną opisana ilościowo przy użyciu teoretyczno-doświadczalnego algorytmu. Analizę zilustrowano na konkretnym przykładzie.
EN
The paper deals with numerical solution of electromagnetic-thermo-mechanical transient associated with levitation heating of a nonferromagnetic sphere in harmonic electromagnetic field. lnvestigated is the period during which the body gets from the starting position to the final levitating position in the inductor that is, however, influenced by its next heating. The problem is solved in quasi-coupled formulation. Theoretical considerations are illustrated on an example whose results are discussed.
PL
W pracy przedstawiono numeryczną symulację pól: elektromagnetycznego i temperatury oraz procesów mechanicznych występujących w czasie lewitacji sfery nie-ferromagnetycznej w harmonicznym polu elektromagnetycznym. Badaniom podlega proces podnoszenia ciała z położenia początkowego do momentu wejścia w lewitację. Uwzględniono słabe sprzężenie analizowanych pól. Przedstawiono i przedyskutowano wyniki eksperymentów numerycznych.
first rewind previous Strona / 2 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.