Research results of novel composite materials with low hysteresis during heating and cooling for pistons of combustion engines

• Autorzy: Sieminska B.
• Języki publikacji: EN

Abstrakty

EN

Research results of novel silumins on pistons for combustion engines, which have high mechanical properties within the range of piston higher operating temperatures, 100-300°C, are presented in the paper. Silumins contain enlarging concentration of the nickel and copper alloy additives up to 4.0, and chrome and molybdenum alloy additives up to 1.0%. Occurrence of given microstructure in piston-silumins results in almost the same values of the coefficient thermal expansion during the heating up to the 300 °C temperature and during the next cooling into the ambient temperature. Small values of the coefficient of expansion of thermal and small differences between values of the coefficient of thermal expansion during heating and cooling enable on application of small values of working clearances between piston and the cylinder liner. As a consequence they make possible, the low exhaust emission level, and the low noise level. The pistons from alloys with small values ofthe coefficient of thermal expansion, small differences of this coefficient during heating and cooling are novel aspects presented in paper. Research results of strength and metallographic parameters, research results of the coefficient of thermal expansion, comparative engine research results are represented in the paper. In particular representative chemical components for a standard alloy and novel alloy, mechanical properties investigated alloys after solution heat treatment, wear resistance of novel alloy compared with two cast irons, ATD curves, fibrous construction, silicon construction, microstructure of novel alloy, courses of changes of the coefficient of thermal expansion in the function of the temperature during heating and cooling are presented in the paper.

Słowa kluczowe

EN

internal combustion engines; engine piston; thermal expansion; emissions

• Wydawca: Łukasiewicz Research Network - Institute of Aviation ; European Science Society of Powertrain and Transport KONES Poland ; Wydawnictwo Instytutu Technicznego Wojsk Lotniczych
• Czasopismo: Journal of KONES
• Rocznik: 2010
• Tom: Vol. 17, No. 1
• Strony: 421--432
• Opis fizyczny: Bibliogr. 14 poz., rys.

Twórcy

autor

Sieminska B.

• Institute of Aviation Krakowska Av. 110/114, 02-256 Warsaw, Poland tel: [phone], fax: [phone],

Bibliografia

• [1] Andersson, P., Tamminen, J., Piston Ring Tribology, Helsinki University, VTT Research Notes 2178, 2002.
• [2] Chawla, K. K., Composite Materials: Science and Engineering, Springer-Verlag, New York 1998.
• [3] Itoh, T., Nagamine, M., Kakuho, A., Amenomori, Y., Urushihara, Y., Common Characteristics Obtained from the Measured Temperature the Information Between Knock and HCCI Combustion, FISITA2008 Proc. F2008-12-012, 2008.
• [4] Jankowska-Sieminska, B., Jankowski, A., Slezak, M., Analysis and Research of Piston Working Conditions of Combustion Engine in High Thermal Load Conditions, Journal of KONES, No. 3, 2007.
• [5] Jankowski, A., Sieminska, B., Slawinski, Z., The Resistance on Thermal Shocks of Combustion Engine Pistons, FISITA 2006 Congress Proceedings, F2006M232. Yokohama 2006.
• [6] Kim, D., Sugawara, N., Kobayashi, K., Takiguchi, M., The Effect of The Multiple Fuel Injections to the State of Piston Lubrication in Supercharged Diesel Engine (The Relations That Fuel Adhesion to a Cylinder and Lubrication Are in a State), FISITA2010 Proc. F2008-06-037, 2008.
• [7] Kuroishi, M., Kawaguchi, A., Inagaki, M., Torii, H., Computational Method of Piston Structure and Lubrication Using Flexible Multibody Dynamics Technique, FISITA2006 Proc. F2006P359, Yokohama Japan 2006.
• [8] Musu, E., Rossi, R., Gentili, R., HCPC, A New Combustion System to Lower Diesel Engine, Emission, FISITA, Proc. F2010-B-103, 2010.
• [9] Ochi, Y., Masaki, K., Matsumura, T., Eskimo, T., Effect of shot-preening treatment on high cycle fatigue property of ductile cast iron, Int. J. Fatigue 23, 2001.
• [10] Pietrowski, S. Silumins, Łódź Technical University, Łódź 2001.
• [11] Pietrowski, S., Sieminska-Jankowska, B., The Coefficient of Thermal Expansion of Novel and Standard Silumins, Przeglad Mechaniczny, Nr 17/18, 1994.
• [12] Sieminska, B., Jankowski, A., Pietrowski, S., Slezak, M., The Pistons from Novel Composite Alloys for Future Combustion Engines of Low Emission Exhausts Gases and Low Noise Levels, FISITA, Congress Proceedings, F2008-06-180, Munich 2008.
• [13] Tomanik, E., Improved Criterion for Ring Conformability under Realistic Bore Deformation, SAE Technical Paper 2009-01-0190, 2009.
• [14] Zhao, F., Asmus, T. W., Assanis, D. N., Dec, J. E., Eng, J. A., Najt, P. M., Homogeneous Charge Compression Ignition (HCCI) Engines – Key Research and Development Issues, SAE International, 2003.