Stator-to-Stator and Rotor-to-Rotor Clocking Measurements in a Two-Stage Low-Pressure Model Turbine

• Autorzy: Świderek M. , Błaszczak J.

Warianty tytułu

PL

Pomiar wpływu zjawiska wzajemnego oddziaływania wieńców dla dwustopniowej turbiny modelowej

• Języki publikacji: EN

Abstrakty

EN

The objective of the presented test program was to investigate the influence of the stator-to-stator and the rotor-to-rotor clocking on the performance in a two-stage low-pressure turbine. Keeping inlet conditions under constant control two turbine stages were experimentally investigated. Experimental data were obtained for nominal as well as for off-design speeds. The experimental investigations have been carried out on a two-stage turbine research facility at the Institute of the Turbomachinery of the Technical University of Lodz, Poland.

Słowa kluczowe

EN

clocking effect; two-stage turbine; experimental results; stator; rotor

PL

turbina dwustopniowa; wieńce; wirnik; stojan

• Wydawca: Wydawnictwo Politechniki Łódzkiej
• Czasopismo: Zeszyty Naukowe. Cieplne Maszyny Przepływowe - Turbomachinery / Politechnika Łódzka
• Rocznik: 2006
• Tom: Nr 129, vol. 1
• Strony: 71--78
• Opis fizyczny: Bibliogr. 22 poz.

Twórcy

autor

Świderek M.

autor

Błaszczak J.

• Institute of Turbomachinery, Technical University of Lodz, Poland,

Bibliografia

• [1] Huber, F.W., Johnson, P.D., Sharma, O.P., Staubach, J.B., Gaddis, S.W., 1996, "Performance Improvement Through Indexing of Turbine Airfoils", ASME J. of Turbomachinery, Vol. 118, pp. 630-635
• [2] Hummel, F. 2002 "Wake-Wake Interaction and Its Potential for Clocking in a Transonic HP Turbine". ASME J. of Turbomachinery, Vol. 124, pp. 629-635
• [3] Saren, V.E., Savin, N.M., 2000, "Hydrodynamic Interaction of a Stator-Rotor-Stator System of an Axial Turbomachine", Fluid Mechanics 3/2000, Russian Academy of Sciences, Moscow, pp. 145-158 (in Russian)
• [4] Jouini, D., Little, D., Bancalari, E., Dunn, M., Haldeman, C., Johnson, P., 2003: "Experimental Investigation of Airfoil Clocking Impacts on Aerodynamic Performance in a Two Stage Turbine Test Rig", ASME GT2003-38872
• [5] Koenig, S., Heidecke, A., Stoffel, B., Fiala, A., Engel, K., 2004, "Clocking Effects in a 1.5 Stage Turbine", ASME GT2004-54055
• [6] Haldeman, C.W., Krumanaker, M.L., Dunn, M.G. 2003, "Influence of Clocking and Vane/Blade Spacing on the Unsteady Surface Pressure Loading for a Modern Stage and One-Half Transonic Turbine", ASME GT2003-38724
• [7] Haldeman, C.W., Dunn M.G., Barter, J.W., Green, B., R., Bergholz, R.F., 2004, "Experimental Investigation of a Vane Clocking in a One and 1/2 Stage High Pressure Turbine", ASME GT2004-53477
• [8] Krysinski, J.E., Gallus, H.E., Smolny, A., Blaszczak, J.R., 1995, "Axial Two-Stage Turbine Test Rig for Unsteady Flow Measurements", SYMKOM'95, CMP-Turbomachinery, Vol. 108, TU Lodz
• [9] Smolny, A., Blaszczak, J.R., 1997, "Experimental Investigations of Unsteady Flow Fields in a Two-Stage Turbine", 2nd European Conference on Turbomachinery, Antwerp, Belgium
• [10] Krysinski, J., Gallus, H.E., Smolny, A., Blaszczak, J.R., 1999, "Stator Wake Clocking Effects on 3D Unsteady Flows in a Two-Stage Turbine", 3rd EuroConf. on Turbomachinery, IMechE, C557/017/99, pp. 323-332, London
• [11] Krysinski, J., Blaszczak, J.R., Smolny, A., 2001, "Stator Clocking Effect on Efficiency of a Two-Stage Low-Pressure Model Turbine". 4th EuroConf. on Turbomachinery, ATI-CST090/01, pp. 1045-1051, Florence, Italy
• [12] Krysinski, J., Smolny, A., Blaszczak, J., Gallus, H.E. 2000, "3D Unsteady Flow Experimental Investigations in a Two-Stage LP Turbine", ISUAAAT'2000, Lyon, France, pp. 515-523
• [14] Krysinski, J.E., Blaszczak, J., Smolny, A., 2003, "Two-Stage Turbine Experimental Investigations of Unsteady Stator-Stator Interaction", ISUAAAT'2003, Durham, NC
• [15] Krysinski, J.E., Blaszczak, J., Smolny, A., 2005, "Stator Clocking Effects On 3D Flow In A Two-Stage Low-Pressure Turbine", ASME GT2005-68811
• [16] Blaszczak, J., 2005, "Experimental Investigations of a Turbine Stage Load on Boundary Layers and Noise Generation", Polish State Committee for Scientific Research, Scientific Project #4T10B04323 (in Polish)
• [17] Blaszczak, J.R., 2005, "Efficiency Improvement and Noise Reduction Through Stator-Stator Clocking Effect of a Two-Stage Turbine", ASME GT2005-68833
• [18] Blaszczak, J.R., 2006, "Noise Reduction and Efficiency Improvement through Vane Indexing of a Two-Stage Turbine", AIAA 2006-2578
• [19] Blaszczak, J.R., Comte-Bellot, G, Smolny, A., 2005: "New aeroacoustic facility at the Institute of Turbomachinery, Technical University of Lodz", CMP/Turbomachinery No. 128, Pl, Lodz
• [20] Vijayaraghavan, S.B., Kavanagh, P., 1988, "Investigation of Boundary Layer Transition and Separation in an Axial Turbine Cascade Using Glue-On Hot-Film Gages", ASME88-GT-151
• [21] Świderek M., 2006, Stator-to-Stator and Rotor-to-Rotor Clocking Measurements in a Two-Stage Low-Pressure Model Turbine, Diploma thesis, TU Lodz
• [22] He, L. Chen, T., Wells, R.G., Li, Y.S., Ning, W., 2002, "Analysis of Rotor-Rotor and Stator-Stator Interferences in MultiStage Turbomachines", ASME J. of Turbomachinery, 124, pp. 564-571