Powiadomienia systemowe
- Sesja wygasła!
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
This paper presents a numerical investigation of the effects of lamination orientation on the fracture behaviour of rectangular steel wires for civil engineering applications using finite element (FE) analysis. The presence of mid-thickness across-the-width lamination changes the cup and cone fracture shape exhibited by the lamination-free wire to a V-shaped fracture with an opening at the bottom/pointed end of the V-shape at the mid-thickness across-the-width lamination location. The presence of mid-width across-the-thickness lamination changes the cup and cone fracture shape of the lamination-free wire without an opening to a cup and cone fracture shape with an opening at the lamination location. The FE fracture behaviour prediction approach adopted in this work provides an understanding of the effects of lamination orientation on the fracture behaviour of wires for civil engineering applications which cannot be understood through experimental investigations because it is impossible to machine laminations in different orientations into wire specimens.
Czasopismo
Rocznik
Tom
Strony
397--408
Opis fizyczny
Bibliogr. 12 poz., il.
Twórcy
autor
- School of Chemical Engineering and Advanced Materials, Newcastle University, Newcastle upon Tyne, United Kingdom
autor
- School of Chemical Engineering and Advanced Materials, Newcastle University, Newcastle upon Tyne, United Kingdom
Bibliografia
- 1. United States Bureau of Reclamation. “Pre-stressed Concrete Pipe Failure Jordan Aqueduct, Reach 3” 1994. All U.S. Government Documents (Utah Regional Depository), Paper284. http://digitalcommons. usu.edu/govdocs/284, assessed on 20/04/2014.
- 2. K. M. Mahmoud, “Fracture strength for a high strength steel bridge cable wire with a surface crack”, Theoretical and Applied Fracture Mechanics, vol 48(2), 152–160, 2007.
- 3. J. Toribio, and F. J. Ayaso, “Anisotropic fracture behaviour of cold drawn steel: a materials science approach”, Materials Science and Engineering, vol A343, 265–272.
- 4. J. Toribio, and F. J. Ayaso, “Fracture Performance of Progressively Drawn Pearlitic Steel under Triaxial Stress States”, Materials Science, vol. 37(5), 70–717, 2001.
- 5. J. Toribio, and A. Valiente, “Failure analysis of cold drawn eutectoid steel wires for pre-stressed concrete”, Engineering Failure Analysis, 13 (3), 301–311, 2006.
- 6. G. F. Vander Voort, “Visual Examination and Light Microscopy”, ASM Handbook, vol. 12: Fractography, 91–165, 1987, ASM web. www.asminternational.org, Assessed 15th June, 2014.
- 7. S. Peet, and A. Wilde, “Laminations-origin, detection and assessment”, Congreso Internacional de Ductos, 14–16 November, 2001, Merida Yucatan, Mexico.
- 8. K. K. Adewole, and S. J. Bull, “Effectiveness of the reverse bending and straightening tests in detecting laminations in wires for civil engineering applications”, Archives of Civil Engineering, 59(4), 423–439, 2013.
- 9. K. K. Adewole, “Identifi cation of Appropriate Micromechanical Fracture Model for Predicting Fracture Performance of Steel Wires for Civil Engineering Applications”, Global Journal of Researches in Engineering: Civil And Structural Engineering, 13(3), 24–33, 2013.
- 10. K. K. Adewole. Numerical prediction of the effects of longitudinal crack-like laminations on the tensile properties of wires, Journal of Civil Engineering and Management, 2014, in press.
- 11. K. K. Adewole. Appropriate Mesh Design for Predicting Complete Fracture Behavior of Wires for Civil Engineering Applications”, American Society of Civil Engineers Journal of Materials in Civil Engineering, 2014, DOI: 10.1061/(ASCE)MT.1943–5533.0001064, in press.
- 12. K. K. Adewole. Numerical prediction of the effects of longitudinal crack-like laminations on the tensile properties of wires, Journal of civil engineering and management, doi:10.3846/13923730.2014.91409, in press.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-07c63309-b038-48ca-9658-810725a376eb