Analysis of printing parameters for production of components with Easy3DMaker printer

• Autorzy: Rengevič A , Fúra M. , Čuboňová N.

Identyfikatory

DOI

10.12913/22998624/65114

• Języki publikacji: EN

Abstrakty

EN

The presented article deals with analyses and testing appropriate parameters for the production of components manufactured with rapid prototyping technology – Easy- 3DMaker printer. The quality of the printed component with a specific shape is analyzed. The analyzed materials are ABS Printplus and PLA Printplus. These materials are printed at different temperatures and speeds. combinations of different settings were tested in order to find the best conditions for printing with different nozzles. The quality of individual printed samples is assessed visually and by touch. The efficiency in terms of print time under various conditions was also analyzed. The main benefit of testing is the establishment of appropriate conditions for printing components on a Easy3DMaker printer. The article does not focus on mechanical properties of the examined samples.

Słowa kluczowe

EN

3D printer; printing parameters; ABS; PLA

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2016
• Tom: Vol. 10, nr 32
• Strony: 1--8
• Opis fizyczny: Bibliogr. 10 poz., rys., tab.

Twórcy

autor

Rengevič A

• Faculty of Mechanical Engineering, University of Žilina, Univerzitna 1, 010 26, Žilina, Slovakia

autor

Fúra M.

• Faculty of Mechanical Engineering, University of Žilina, Univerzitna 1, 010 26, Žilina, Slovakia

autor

Čuboňová N.

• Faculty of Mechanical Engineering, University of Žilina, Univerzitna 1, 010 26, Žilina, Slovakia

Bibliografia

• 1. Academy X s.r.o.: ABS. Online: http:// www.3dtlaciaren.eu/abs-printplus/, 2015.
• 2. AROJA s.r.o.: Užívateľský manuál typ: EASY3DMAKER. Version 1, 2013.
• 3. Císar, M.: Diagnosis of equipments. In: Mechanization and automation equipment for processing. Cluj-Napoca: Publishing House Alma Mater, 2015, 209-240.
• 4. Cotetiu, I., Kuric, I., Novák-Marcinčin, J., Ungureanu, N.: New trends in mechanical design and technologies. In: Cluj Napoca, Risoprint, 2005, 224.
• 5. Kumičáková, D., Jakubčík, M.: Specialised robotic hand designing and object grasping simulation. In: Robotics in theory and practice Book Series: Applied Mechanics and Materials, 2013, 282, pp. 9.
• 6. Kumičáková, D., Gorski, F., Milecki, A., Grajewski, D.: Utilization of advanced simulation methods for solving of assembly processes automation partial tasks. Manufacturing Technology, Vol. 13(4), 2009, pp. 9.
• 7. Náprstková, N.: CAE 1-Studijní opory. Univerzita J. E. Purkyně v Ústi nad Labem, 2012, pp. 80.
• 8. Novák-Marcinčin, J., Kuric, I., Mikac, T., Barišič, B.: Computer support for improvement engineering and manufacturing activities. In: University of Rijeka, 2009, pp. 241.
• 9. Petruš, J.: Kyselina polymléčná nejen jako biodegradabilní polymer. In: www.chempoint.cz, Vysoké učení technické v Brně, Fakulta chemická, 2011.
• 10. Stančeková, D., Czán, A., Derbas, M.: Investigation of defects in forging tools by forging tools by nondestructive detection method. In: Metal 2013 [web source]: 22th International conference on metallurgy and materials: conference proceedings: May 15th-17th 2013, Brno, Czech Republic, EU. - Ostrava TANGER Ltd., 2013, pp. 7.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.