Tribological behavior of low-alloyed steel after nitriding

• Autorzy: Vicen Martin , Bokůvka Otakar , Nikolić Ružica , Bronček Jozef

Identyfikatory

DOI

10.30657/pea.2020.26.16

• Języki publikacji: EN

Abstrakty

EN

The tribological properties of the nitride layer applied to the low-alloyed steel were investigated in this research. Experimental work included determination if the chemical composition, wear resistance, Rockwell, Vickers and nano-indentation tests, both of the substrate material – the low-alloyed steel and the deposited nitride layer. From the results obtained in those experiments authors concluded that applying the nitride layer does not significantly improve the tribological properties of the tested lowalloyed steel samples, thus this process is not recommended for achieving that purpose.

Słowa kluczowe

EN

low alloyed steels; nitriding; tribology; behavior

PL

stale niskostopowe; azotowanie; trybologia; zachowanie

• Wydawca: Oficyna Wydawnicza Stowarzyszenia Menedżerów Jakości i Produkcji
• Czasopismo: Production Engineering Archives
• Rocznik: 2020
• Tom: Vol. 26, Iss. 3
• Strony: 78--83
• Opis fizyczny: Bibliogr. 13 poz., rys., tab.

Twórcy

autor

Vicen Martin

• Faculty of Mechanical Engineering, University of Žilina, Univerzitná 8215/1, 010 26 Žilina, Slovak Republic

autor

Bokůvka Otakar

• Faculty of Mechanical Engineering, University of Žilina, Univerzitná 8215/1, 010 26 Žilina, Slovak Republic

autor

Nikolić Ružica

• University of Žilina, Research Centre, Univerzitná 8215/1, 010 26 Žilina, Slovak Republic

autor

Bronček Jozef

• Faculty of Mechanical Engineering, University of Žilina, Univerzitná 8215/1, 010 26 Žilina, Slovak Republic

Bibliografia

• 1.Atapour, A., Ashrafizadeh, F., 2008. Tribology and cyclic oxidation behaviour of plasma nitride valve steel, Surface and Coatings Technology, 4922-4929.
• 2.Binder, C., Bendo, T., Hammes, G., Klein, A.N., de Mello, J.D.B., 2015. Effect of nature of nitride phases on sliding wear of plasma nitride sintered iron, Wear 332-333, 995-1005.
• 3.Bronček, J., Vicen, M., Fabian, P., Radek, N., 2020. Investigation of the tribological properties of the nitride layer on heat-treated Steel 100Cr6, Current Methods of Construction Design, Lecture Notes in Mechanical Engineering, ISSN 2195-4364, 463-471.
• 4.Drábik, M., Ballo, V., Truchlý, M., Frkáň, J., Roch, T., Kvetková, L., Satrapinskyy, L., Kúš, P., 2016. Influence of plasma pretreatment on the performance of industrial tungsten carbide coatings deposited at low temperature on 100Cr6 bearing steel substrates, Surface and Coatings Technology, Vol. 293, 2-9.
• 5.Drabik, M.,Truchlý, M., Ballo, V., Roch, T., Kvetková, L., Kúš, P., 2018. Influence of substrate material and its plasma pretreatment on adhesion and properties of WC/a-C:H nano-composite coatings deposited at low temperature, Surface and coatings technology, 333,138-147.
• 6.Hazlinger, M., Moravčík, R., 2013. Chemical-heat treatment of materials, 1st edition - STU Bratislava. ISBN 978-80-227-3924-5 (In Slovak).
• 7.Kuffova, M., Čelko, P., 2015. Application of plasma nitriding on low-alloy (50CrV4+QT) steel in order to improve its fatigue resistance, Kovove materialy - Metallic materials, 53, 4430450.
• 8.Landová, M., Brezinová, J., 2017. Effect of tribological conditions for properties thermal spraying, Production Engineering Archives, 14, 37-39.
• 9.Li, C., Takeichi, Y., Shimizu, S., Uemura, M., Dzimko, M., Tsuya, Y., 2000. Tribological behavior of bonded solid lubricant film in air and in vacuum, Communications -Scientific Letters of University of Zilina, 2(3), 77-83.
• 10.Takeichi, Y., Dzimko, M., Winkelmann, W., 2010. The effects of MoO3 powder lubrication on tribological properties of sliding pair exposed to high temperature, Communications -Scientific Letters of University of Zilina, 12(2), 67-71.
• 11.Terres, M.A., Ammari, L., Chérif, A., 2017. Study of the Effect of Gas Nitriding Time on Microstructure and Wear Resistance of 42CrMo4 Steel, Materials Sciences and Applications, 8, 493-507.
• 12.Ulewicz, R., Nový, N., Mazur, M., Szataniak, P., 2014. Fatigue properties of the HSLA steel in high and ultra-high cycle region, Production Engineering Archives, 4(3), 18-21.
• 13.Zhou, Z. A., Fu, W. T., Zhang, R. H., Qi, J. J., Jin, G. F., Wang, Z. H., Sun, S. H., 2018. Analysis of gas nitriding characteristics under different cold hardening and nitriding pressure conditions for low-carbon low-alloy steel, Strength of Materials, 50(1), 211-217.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).