PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Evaluation of strength of carrying metal structures of trailers

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Purpose: Development of a computational model of stress-strain state bearing elements of trailer frames for preliminary assessment and identification of areas with increased risk of failure. Design/methodology/approach: The object of the study is the processes of loading the load-bearing metal structures of trailers - fertilizer spreaders. The stress-strain state of the spreader bearing system is investigated for the established three typical cases of external load. To refine the values obtained as a result of modelling, they were determined in SOLIDWORKS. Findings: Computational models of load have been compiled by improving the method of minimum potential deformation energy for its effective correct use in analytical studies of a similar type of metal structures. It is proved that for a flat closed frame structure made of thin-walled profiles, loaded with forces perpendicular to the plane of the frame, the levelling of compression and shear energies, as well as axial and transverse forces and bending moments in the horizontal plane does not significantly affect the calculation results. Research limitations/implications: Horizontal components of the shear forces as well as the normal forces and as a consequence the corresponding potential deformation energy are neglected, which has some effect on the accuracy of the calculations. Practical implications: An effective tool for strength analysis with preliminary assessment and diagnostics of load-bearing metal structures based on the constructed calculation models of stress strain state load-bearing frames of typical geometry with an arbitrarily given distribution of external load. Originality/value: A universal algorithm for recording additive functions of bending and torques, as well as the potential deformation energy of welded frames of trailers.
Rocznik
Strony
58--69
Opis fizyczny
Bibliogr. 31 poz., rys., tab.
Twórcy
autor
  • Ternopil Ivan Puluj National Technical University, 56 Ruska str., Ternopil, Ukraine
  • Ivano-Frankivsk National Technical University of Oil and Gas, 15 Karpatska str., Ivano-Frankivsk, Ukraine
autor
  • Ternopil Ivan Puluj National Technical University, 56 Ruska str., Ternopil, Ukraine
autor
  • Lutsk National Technical University, Lvivska St, 75, Lutsk, Volyn Oblast, Ukraina
autor
  • Ternopil Ivan Puluj National Technical University, 56 Ruska str., Ternopil, Ukraine
autor
  • Ternopil Ivan Puluj National Technical University, 56 Ruska str., Ternopil, Ukraine
  • Ivano-Frankivsk National Technical University of Oil and Gas, 15 Karpatska str., Ivano-Frankivsk, Ukraine
Bibliografia
  • [1] E. Slivinskii, S. Radin, I. Gridchina, Modernization of Bodies of Dumping Trailers with Put-On Sides and Their Calculation on Durability, Computer Science and Applications 1/3 (2014) 139-151.
  • [2] M.V.R. Bankapur, S.A. Janawade, Fatigue Analysis of Tractor Trailer Chassis, International Research Journal of Engineering and Technology 2/3 (2015) 1583-1588.
  • [3] G.S. Mills, J.L. Sprung, D. Osborn, Tractor/trailer accident statistics, No. SAND2007-6508C, Sandia National Lab.(SNL-NM), Albuquerque, NM, United States, 2007.
  • [4] GTM (РТМ) 23.2.75.-82, Guiding technical material, Welded frames of agricultural machines. Structural and technological design, VISKHOM, Moscow, 1982.
  • [5] V.V. Moskvichev, Fundamentals of structural strength of technical systems and engineering structures, Nauka, Novosibirsk, 2002.
  • [6] Ya. Doroshenko, V. Zapukhliak, Ya. Grudz, L. Poberezhny, A. Hrytsanchuk, P. Popovych, O. Shevchuk, Numerical simulation of the stress state of an erosion-worn tee of the main gas pipeline, Archives of Materials Science and Engineering 101/2 (2020) 63-78. DOI: https://doi.org/10.5604/01.3001.0014.1192
  • [7] P.V. Popovych, O.L. Lyashuk, O.S. Shevchuk, O.P. Tson, L.Y. Poberezhna, I.M. Bortnyk, Influence of organic operation environment on corrosion properties of metal structure materials of vehicles, INMATEH - Agricultural Engineering 52/2 (2017) 113-118.
  • [8] P. Popovych, V. Dzyura, O. Shevchuk, V. Myndyuk, The service life evaluation of fertilizer spreaders undercarriages, INMATEH - Agricultural Engineering50/3 (2016) 39-46.
  • [9] I.V. Lytvynenko, P.O. Maruschak, S.A. Lupenko, P.V. Popovych, Modeling of the Ordered Surface Topography of Statically Deformed Aluminum Alloy, Materials Science 52 (2016) 113-122. DOI: https://doi.org/10.1007/s11003-016-9933-1
  • [10] R.A. Barna, P.V. Popovіch, Influence of Operating Media on the Fatigue Fracture of Steels for Elements of Agricultural Machines, Materials Science50/3 (2014) 377-380. DOI: https://doi.org/10.1007/s11003-014-9729-0
  • [11] B.M. Hevko, P.V. Popovich, A.Y. Diachun, O.L. Lyashuk, R.O. Liubachivskyi, The study of bulk material kinematics in a screw conveyor-mixer, INMATEH - Agricultural Engineering 47/3 (2015) 156-163.
  • [12] P. Maruschak, R. Bishchak, A. Pylypenko, M. Chausov, I. Konovalenko, Automated analysis of statically deformed material condition based on results of optical-digital analysis and strain gauging, Proceedings of the 18th International Conference, Kaunas University of Technology, 2014, 383-386.
  • [13] V. Gliha, P. Maruschak, T. Vuherer, Behaviour of short cracks emanating from tiny drilled holes, Materiali in Tehnologije/Materials and Technology 47/4 (2013) 441-446.
  • [14] L.Y. Poberezhnyi, P.O. Marushchak, A.P. Sorochak, D. Draganovska, A.V. Hrytsanchuk, B.V. Mishchuk, Corrosive and mechanical degradation of pipelines in acid soils, Strength of Materials 49/4 (2017) 539-549. DOI: https://doi.org/10.1007/s11223-017-9897-x
  • [15] P. Maruschak, L. Poberezny, O. Prentkovskis, R. Bishchak, A. Sorochak, D. Baran, Physical and mechanical aspects of corrosion damage of distribution gas pipelines after long-term operation, Journal of Failure Analysis And Prevention 18/3 (2018) 562-567. DOI: https://doi.org/10.1007/s11668-018-0439-z
  • [16] A.V. Yavorskyi, M.O. Karpash, L.Y. Zhovtulia, L.Y. Poberezhny, P.O. Maruschak, Safe operation of engineering structures in the oil and gas industry, Journal of Natural Gas Science and Engineering 46 (2017) 289-295. DOI: https://doi.org/10.1016/j.jngse.2017.07.026
  • [17] P. Maruschak, S. Panin, I. Danyliuk, L. Poberezhnyi, T. Pyrig, R. Bishchak, I. Vlasov, Structural and mechanical defects of materials of offshore and onshore main gas pipelines after long-term operation, Open Engineering 5 (2015) 365-372. DOI: https://doi.org/10.1515/eng-2015-0045
  • [18] L. Poberezhnyi, P. Maruschak, O. Prentkovskis, I. Danyliuk, T. Pyrig, J. Brezinová, Fatigue and failure of steel of offshore gas pipeline after the laying operation, Archives of Civil and Mechanical Engineering 16/3 (2016) 524-536. DOI: https://doi.org/10.1016/j.acme.2016.03.003
  • [19] L. Poberezhny, A. Hrytsanchuk, G. Hrytsuliak, L. Poberezhna, M. Kosmii, Influence of hydrate formation and wall shear stress on the corrosion rate of industrial pipeline materials, Koroze a Ochrana Materialu 62/4 (2018) 121-128. DOI: https://doi.org/10.2478/kom-2018-0017
  • [20] L. Poberezhny, A. Hrytsanchuk, I. Okipnyi, L. Poberezhna, A. Stanetsky, N. Fedchyshyn, Minimizing losses during natural gas transportation, Journal of Mechanical Engineering - Strojnícky Časopis 69/1 (2019) 97-108. DOI: https://doi.org/10.2478/scjme-2019-0008
  • [21] P. Popovych, Kompleksnyi analiz nadiinosti nesuchykh system traktornykh prychepiv pry yikhnii ekspluatatsii, Mekhanizatsiia silskohospodarskoho Vyrobnytstva - Visnyk KhNTUSH 93 (2010) 411-414 (in Ukrainian).
  • [22] L. Poberezhny, P. Maruschak, A. Hrytsanchuk, B. Mischuk, D. Draganovska, L. Poberezhna, Impact of AC current density on material corrosion of distribution pipelines, Koroze a Ochrana Materialu 61/5 (2017) 178-184. DOI: https://doi.org/10.1515/kom-2017-0023
  • [23] N.A. Makhutov, A criterion base for assessment of strength, lifetime, reliability, survivability, and security of machines and man-machine systems, Journal of Machinery Manufacture and Reliability 42/5 (2013) 364-373. DOI: https://doi.org/10.3103/S1052618813050075
  • [24] I. Shames, Energy and finite element methods in structural mechanics, Routledge, 2018.
  • [25] S.A. Chernishov, O dostovernosti raschetnykh otsenok NDS ramy gruzovogo avtomobilya, Problemy Mashinostroyeniya i Nadezhnost' Mashin 3 (1998) 117-121 (in Russian).
  • [26] J. Mangado, J.I. Arana, C. Jarén, S. Arazuri, P. Arnal, Design calculations on roll-over protective structures for agricultural tractors. Biosystems Engineering 96/2 (2007) 181-191. DOI: https://doi.org/10.1016/j.biosystemseng.2006.10.016
  • [27] S. Timoshenko, Strength of Materials, Vol. II, Van Nostrand Company, Princeton, NJ, 1956.
  • [28] P. Popovych, Unification of the stress-strain state investigation of the supporting structural systems, Bulletin of TNTU ‒ Ternopil: TNTU 78/2 (2015) 153-163 (in Ukrainian).
  • [29] T.I. Rybak, Poshukove konstruiuvannia na bazi optymizatsii resursu mobilnykh silskohospodarskykh mashyn, Ternopil, Zbruch, 2003 (in Ukrainian).
  • [30] A.V. Yavorskyi, M.O. Karpash, L.Y. Zhovtulia, L.Y. Poberezhny, P.O. Maruschak, O. Prentkovskis, Risk management of a safe operation of engineering structures in the oil and gas sector, Proceedings of the 20th International Scientific Conference „Transport Means”, 2016, 370-373.
  • [31] P.V. Popovych, Metody otsinky resursu nesuchykh system prychipnykh mashyn dlia vnesennia dobryv z vrakhuvanniam vplyvu ahresyvnykh seredovyshch, PhD Thesis, Ternopilskyi Natsionalnyi Tekhnichnyi Universytet imeni Ivana Puliuia, 2015 (in Ukrainian).
Uwagi
PL
Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-4c2dd393-f28d-4899-a022-a914dc38ab66
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.