An analysis of influence of sampling strategy and scanning speed on estimation of straightness and flatness deviations with CMMs

• Autorzy: Stępień K.

Identyfikatory

DOI

10.17814/atim.2015.2(3).17

• Języki publikacji: EN

Abstrakty

EN

The paper deals with the problem of influence of scanning speed and measuring strategy on results of flatness and straightness deviations with CMMs. The straightness was studied for various numbers of sampling points and for various scanning speeds. The flatness was investigated for various measurement paths and for various levels of scanning speeds. The results of the study indicate that applied measurement speed and selected measurement path can change obtained results very significantly.

Słowa kluczowe

EN

form deviation; flatness; straightness; CMM

• Wydawca: Stowarzyszenie Inżynierów i Techników Mechaników Polskich
• Czasopismo: Advanced Technologies in Mechanics
• Rocznik: 2015
• Tom: Vol. 2, no. 2 (3)
• Strony: 2--8
• Opis fizyczny: Bibliogr. 6 poz., rys., tab.

Twórcy

autor

Stępień K.

• Kielce University of Technology, Poland

Bibliografia

• [1] Adamczak S., Miko E., Cus F. A model of surface roughness constitution in the metal cutting process applying tools with defined stereometry, Strojniski Vestnik 55 (2009) 45-54.
• [2] Poniatowska M, Werner A.: Fitting spatial models of geometric deviations of free-form surfaces determined in coordinate measurements. Metrology and Measurement Systems, nr 12/4, 2010, 599–610.
• [3] Zawada-Tomkiewicz A.: Estimation of surface roughness parameter based on machined surface image, Metrology and Measurement Systems, nr 17/3, 2010, 493-504.
• [4] A. H. R. Salah, The influence of fitting algorithm and scanning speed on roundness error for 50 mm standard ring measurement using CMM, Metrology and Measurement Systems 15/1 (2008) 33–54.
• [5] Żebrowska-Łucyk S., Cyfrowe metody pomiaru odchyłki walcowości. Model matematyczny, oprogramowanie, wyniki badań. Konferencja „Metrologia Wspomagana Komputerowo”, Zegrze k. Warszawy, 1993, t.2/B, s.269.
• [6] Wiśniewska M., Żebrowska-Łucyk S., The problem of accuracy in roughness measurement with the use of the form measuring machine Talyrond 365, Proceedings of the 11th International Symposium on Measurement and Quality Control – ISMQC 2013, Sept. 2013, Cracow-Kielce, Poland.