Archives of Metallurgy and Materials - Tom Vol. 66, iss. 1 (2021) - BazTech - Yadda

Tom - szczegóły

Tytuł artykułu

Vol. 66, iss. 1

Czasopismo

Archives of Metallurgy and Materials

Wydawca

Institute of Metallurgy and Materials Science of Polish Academy of Sciences
Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences

Rocznik

2021

Identyfikatory

Zawartość wolumenu

Vol. 66, iss. 1
- artykuł: The Oxide Scales Formed on Different Co-Ni Based Superalloys During Isothermal Oxidation at 800 and 900°C (Migas D., Kierat M., Moskal G.), s. 5--14
- artykuł: Study of the Properties of the AlSi9Cu3 Alloy Depending on the Ratio of Returnable Material in the Batch (Matejka M., Bolibruchová D., Chalupová M.), s. 15--23
- artykuł: Application of Non-Silica Sands for High Quality Castings (Beňo J., Poręba M., Bajer T.), s. 25--30
- artykuł: The Analysis of Filler Material Effect on Properties of Excavator Crawler Track Shoe after Welding Regeneration (Gucwa M., Winczek J., Wieczorek P., Mičian M., Koňár R.), s. 31--36
- artykuł: Influence of Heat Treatment and Nickel Content on the Properties of the GX4CrNi13-4 Steel (Kaňa V., Krutiš V., Bořil P., Záděra A., Rimko M.), s. 37--41
- artykuł: Influence of Molding Materials on the Self-Hardening of X46Cr13 Steel / Grey Cast Iron Bimetallic Castings (Przyszlak N., Wróbel T., Dulska A.), s. 43--50
- artykuł: Analysis of the Mechanical Properties of the Titanium Layer Obtained by the Mold Cavity Preparation Method (Dulska A., Szajnar J., Król M.), s. 51--56
- artykuł: Benefit Effect of Low Addition Yttrium on the Phase αMg and eutectic αMg+γ(Mg17Al12) in AZ91 Alloy (Mikusek D., Rapiejko C., Andrzejczak A., Pacyniak T.), s. 57--63
- artykuł: Effect of Ti on Selected Properties of AlSi7Mg0.3Cu0.5 Alloy with Constant Addition of Zr (Bolibruchová D., Kuriš M., Matejka M., Major-Gabryś K., Vicent M.), s. 65--72
- artykuł: The Influence of Hyperquenching Temperature on Microstructure and Mechanical Properties of Alloy Cast Steel GX2CrNiMoCuN 25-6-3-3 (Jurczyk P., Wróbel T., Baron C.), s. 73--80
- artykuł: Physical Simulation of Individual Heat-Affected Zones in S960MC Steel (Mičian M., Winczek J., Harmaniak R., Koňár R., Gucwa M., Moravec J.), s. 81--89
- artykuł: The Effect of Ho Doping Contents on the Structural, Microstructure and Dielectric Properties of Bi5Ti3FeO15 Aurivillius Ceramics (Tomaszewska M., Dzik J., Wodecka-Duś B., Pikula T., Adamczyk-Habrajska M., Szalbot D., Chocyk D.), s. 91--96
- artykuł: Investigation on Mechanical Properties and Microstructures of Aluminum Hybrid Composites Reinforced with Al2O3/GNPs Binary Particles (Şenel M. Can, Gürbüz M.), s. 97--106
- artykuł: Prediction of Martensite Start Temperatures of Highly Alloyed Steels (Lee Seok-Jae, Jung Minsu), s. 107--111
- artykuł: Microstructure Evolution and Formation Mechanism of Copper-Silver Alloy Fabricated by Induction Heating Directional Solidification at Different Mold Temperatures (Luo Jihui, Li Yangyang, Huang Yanke, Huang Yuehao, Zheng Yuling), s. 113--117
- artykuł: The Critical Conditions and Kinetics Required for Dynamic Recrystallization in a High-Carbon Tool Steel (Zhang Yong-Ji, Wu Guang-Lian, Wu Shang-Wen), s. 119--125
- artykuł: Effect of Particle Sizes of Slag on Reduction Characteristics of Nickel Slag-Coal Composite Briquette (Li Xiaoming, Li Yi, Xing Xiangdong, Wang Yanjun, Wen Zhenyu, Yang Haibo), s. 127--134
- artykuł: Steel Packaging Production Process and a Review of New Trends (Słowik M., Cępa P., Czapla K., Żabiński P.), s. 135--143
- artykuł: Study on Dynamic Recrystallization Models of 21-4N Heat Resistant Steel (Li Yiming, Huang Xiaomin, Ji Hongchao, Li Yaogang, Wang Baoyu, Tang Xuefeng), s. 145--152
- artykuł: Joint Formation and Mechanical Properties of 2060 Aluminum Alloy Refill Friction Stir Spot Welding Joint (Shang Zhen, Zuo Yingying, Ji Shude, Wang Yue, Chai Peng), s. 153--161
- artykuł: The Effect of Heat Treatment on the Microstructure Evolution and Properties of an Age-Hardened Cu-3Ti-2Mg Alloy (Liu Jituo, Wang Xianhui, Liu Jia, Ran Qianni), s. 163--170
- artykuł: Formation and Thermodynamic Analyses of Inclusions in Ti-Containing Steel Weld Metals with Different Al Contents (Wang Bingxin, Jiang Yingtian), s. 171--180
- artykuł: The Influence of the Processing Temperature of Polylactide on Geometric Structure of the Surface Using FDM Technique (Pszczółkowski B., Bramowicz M., Rejmer W., Chrostek T., Senderowski C.), s. 181--186
- artykuł: Effect of Shielding Gas Composition on Geometry and Austenite Formation in Low Power Pulsed Nd:YAG Laser Welded 2205 Duplex Stainless Steel (Gozarganji Hajibaba, E., Farnia A., Ebrahimnia M.), s. 187--195
- artykuł: Thermal Fatigue Damage and Residual Mechanical Properties of WCu45/FeCr18Ni9 Steel Brazed Joint with NiCrSiBFe Filler Metal (Xia Chunzhi, Fu Linling, Du Wenchao, Xu Xiangping, Wang Xiling, Zou Jiasheng), s. 197--203
- artykuł: Investigation of Tribological and Mechanical Properties of Biodegradable AZ91 Alloy Produced by Cold Chamber High Pressure Casting Method (Urtekin Levent, Arslan Recep, Bozkurt Fatih, Er Ümit), s. 205--216
- artykuł: Ultrasonic Assisted Active-Passive Filling Friction Stir Repairing to Eliminate Volume Defects (Wang Tao, Gong Xue, Ji Shude, Xue Gang, Lv Zan), s. 217--222
- artykuł: Hot Deformation Activation Energy of Metallic Materials Influenced by Strain Value (Schindler I., Opěla P., Kawulok P., Sauer M., Rusz S., Kuc D., Rodak K.), s. 223--228
- artykuł: The Bending, Impact Fracture Behavior and Characteristics of Stainless Steel Clad Plates with Different Rolling Temperature (An Q., Fan K. Y., Ge Y. F., Liu B. X., He J., Wang S., Chen C. X., Ji P. G., Tolochko O.), s. 229--239
- artykuł: Assessment of the Hot Cracking Susceptibility of the Inconel 617 Nickel-Based Alloy (Adamiec J., Konieczna N.), s. 241--248
- artykuł: Thermodynamic Analysis of the Graphite Flake Formation of Low Manganese and Sulfur Gray Cast Iron (Reyes-Castellanos G., Cruz-Ramírez A., Colin-García E., Gutiérrez-Pérez V. H.), s. 249--258
- artykuł: Effect of Mn Amount on Phase Transformations and Magnetic Properties in Fe-Mn-Mo-Si Alloys (Armağan Osman, Kirindi Talip), s. 259--266
- artykuł: Corrosion Behavior of Amorphous-Nanocrystalline Ni50Ti50 Shape Memory Alloy (Aghabeygzadeh H., Mohammad Sharifi E., Tavoosi M.), s. 267--272
- artykuł: The Effect of Adding Iron Powder From Plasma Cutting on the Microstructure, Mechanical Properties of the Composite Based on Aluminum Powder Matrix Made Using Powder Metallurgy (Wędrychowicz M., Bydałek A. W., Migas P., Skrzekut T., Noga P., Madej P., Kałasznikow A.), s. 273--279
- artykuł: Thermodynamic Description of Ternary Fe-B-X Systems. Part 8: Fe-B-Mo, with Extension to Quaternary Fe-B-Cr-Mo System (Miettinen Jyrki, Visuri Ville-Valtteri, Fabritius Timo), s. 281--295
- artykuł: Thermodynamic Description of Ternary Fe-B-X Systems. Part 9: Fe-B-Cu (Miettinen Jyrki, Visuri Ville-Valtteri, Fabritius Timo), s. 297--304
- artykuł: The Properties of a Polypropylene Matrix Composite with Anthracite Filler (Polok-Rubiniec Magdalena, Włodarczyk-Fligier A., Chmielnicki B.), s. 305--311
- artykuł: Polypropylene-Matrix Polymer Composites with Natural Filler (Włodarczyk-Fligier Anna, Polok-Rubiniec M., Chmielnicki B.), s. 313--319
- artykuł: Fatigue and Corrosion Fatigue of 18Ni Maraging Steel (Yongmei Zhu, Junjie Chen, Wenxian Tang, Weicheng Cui, Xiaorong Wang, Fang Wang, Baoji Yin), s. 321--330
- artykuł: Examples of Simulation of the Alloying Elements Effect on Austenite Transformations During Continuous Cooling (Trzaska Jacek), s. 331--337
- artykuł: Damping Properties and Density of Helmet Liners Made of Expanded Polystyrene (EPS) (Trzaskalska M., Chwastek R.), s. 339--344

rozwiń roczniki

JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.