PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Medical imaging and 3D reconstruction for obtaining the geometrical and physical model of a congenital bilateral radio-ulnar synostosis

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The paper presents results of a 3D reconstruction of a congenital bilateral radio-ulnar synostosis. Basics of anatomy and biomechanical analysis of the elbow joint were introduced. Case report of a congenital bilateral radio-ulnar synostosis was presented. Based on the data from computed tomography imaging, the model of a congenital bilateral radio-ulnar synostosis was constructed. Basic information on reverse engineering, rapid prototyping and methods of making physical models are presented. The creation of physical models was aimed at pre-operative planning and conceptualization. Physical models were also used in the educational form at the stage of communication with the patient.
Rocznik
Strony
84--93
Opis fizyczny
Bibliogr. 23 poz., fig.
Twórcy
  • Department of Machine Design and Mechatronics, Faculty of Mechanical Engineering, Lublin University of Technology, Nadbystrzycka 36, 20-618 Lublin, Poland
autor
  • Department of Machine Design and Mechatronics, Faculty of Mechanical Engineering, Lublin University of Technology, Nadbystrzycka 36, 20-618 Lublin, Poland
autor
  • Orthopedic Department, Łęczna Hospital, Krasnystawska 52, 21-010 Łęczna, Poland
Bibliografia
  • 1. Al-Saadi, Z. S., & Havekrog, B. H. (2008). Congenital radioulnar synostosis. Ugeskr Laeger, 170(40), 3147–3148.
  • 2. Bagaria, V., Deshpande, S., Rasalkar, D. D., Kuthe, A., & Paunipagar, B. K. (2011). Use of rapid prototyping and three-dimensional reconstruction modeling in the management of complex fractures. European journal of radiology, 80(3), 814–820.
  • 3. Brown, G. A., Firoozbakhsh, K., DeCoster, T. A., Reyna Jr, J. R., & Moneim, M. (2003). Rapid prototyping: the future of trauma surgery? The Journal of Bone and Joint Surgery, 85, 49–55.
  • 4. Budzik, G., Dziubek, T., & Turek, P. (2015). Podstawowe czynniki wpływające na jakość obrazów tomograficznych. Problemy Nauk Stosowanych, 3, 077–084.
  • 5. Fahlstrom, S. (1932). Radio-ulnar synostosis: historical review and case report. The Journal of Bone and Joint Surgery, 14(2), 395–403.
  • 6. Frame, M., & Huntley, J. S. (2012). Rapid prototyping in orthopaedic surgery: a user's guide. The Scientific World Journal, 2012, 838575. doi:10.1100/2012/838575
  • 7. Guarino, J., Tennyson, S., McCain, G., Bond, L., Shea, K., & King, H. (2007). Rapid prototyping technology for surgeries of the pediatric spine and pelvis: benefits analysis. Journal of Pediatric Orthopaedics, 27(8), 955–960.
  • 8. Hansen, O. H., & Andersen, N. O. (1970). Congenital radio-ulnar synostosis. Report of 37 cases. Acta Orthopaedica Scandinavica, 41(3), 225–230.
  • 9. Holubar, S. D., Hassinger, J. P., & Dozois, E. J. (2009). Virtual pelvic anatomy and surgery simulator: an innovative tool for teaching pelvic surgical anatomy. Studies in Health Technology and Informatics, 142, 122–124.
  • 10. Hurson, C., Tansey, A., O’Donnchadha, B., Nicholson, P., Rice, J., & McElwain, J. (2007). Rapid prototyping in the assessment, classification and preoperative planning of acetabular fractures. Injury, 38(10), 1158–1162.
  • 11. Karpiński, R., Jaworski, Ł., & Zubrzycki, J. (2016). Structural analysis of articular cartilage of the hip joint using finite element method. Advances in Science and Technology Research Journal, 10(31), 240–246. doi:10.12913/22998624/64064
  • 12. Karpiński, R., Jaworski, Ł., & Zubrzycki, J. (2017). The design and structural analysis of the endoprosthesis of the shoulder joint. ITM Web of Conferences, 15, 07015. doi:10.1051/itmconf/ 20171507015
  • 13. Karpiński, R., Jaworski, Ł., Szala, M., & Mańko, M. (2017). Influence of patient position and implant material on the stress distribution in an artificial intervertebral disc of the lumbar vertebrae. ITM Web of Conferences, 15, 07006. doi:10.1051/itmconf/20171507006
  • 14. Kozłowska, E., & Zubrzycki, J. (2017). Using methods of the reverse engineering to carry personalised preoperative stabilisers out on the example of vertebrae of human spine. ITM Web of Conferences, 15, 02007. doi:10.1051/itmconf/20171502007
  • 15. McGurk, M., Potamianos, P., Amis, A. A., & Goodger, N. M. (1997). Rapid prototyping techniques for anatomical modelling in medicine. Annals of the Royal College of Surgeons of England, 79(3), 169–174.
  • 16. Mulford, J. S., Babazadeh, S., & Mackay, N. (2016). Three dimensional printing in orthopaedic surgery: review of current and future applications. ANZ Journal of Surgery, 86(9), 648–653.
  • 17. Petzold, R., Zeilhofer, H. F., & Kalender, W. A. (1999). Rapid prototyping technology in medicine – basics and applications. Computerized Medical Imaging and Graphics, 23(5), 277–284.
  • 18. Ratajczyk, E. (2012). Rentgenowska tomografia komputerowa (CT) do zadań przemysłowych. Pomiary Automatyka Robotyka, 16, 104–113.
  • 19. Rizzo, R., Pavone, V., Corsello, G., Sorge, G., & Opitz, J. M. (1997). Autosomal dominant and sporadic radio-ulnar synostosis. American Journal of Medical Genetics, 68(2), 127–134.
  • 20. Skalski, K., Grygoruk, R., Makuch, A., & Dąbrowska-Tkaczyk, A. (2015). Modelowanie wirtualne i materialne na potrzeby komputerowego wspomagania zabiegów operacyjnych. In M. Gzik, M. Pawlikowski, M. Lewandowska-Szumieł & M. Wychowański (Eds.), Biomechanika i Inżynieria Biomedyczna (pp. 481–498). Akademicka Oficyna Wydawnicza EXIT.
  • 21. Skalski, K., & Haraburda, M. (2009). Komputerowe wspomagane projektowanie i wytwarzanie implantów stawów człowieka. Monografia nr 137. Radom: Wydawnictwo Politechniki Radomskiej.
  • 22. Zubrzycki, J., & Braniewska, M. (2017). Zastosowanie inżynierii odwrotnej w projektowaniu spersonalizowanego implantu stawu biodrowego. Mechanik, 90(1), 46–47.
  • 23. Zubrzycki, J., Karpiński, R., & Górniak, B. (2016). Computer aided design and structural analysis of the endoprosthesis of the knee joint. Applied Computer Science, 12(2), 84–95.
Uwagi
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-481046af-0a80-4062-aaec-64b636286313
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.