Experimental investigation for non-linear vibrations of free supported and cantilever FFF rectangular plates

• Autorzy: Abdeddine E. , Majid A. , Beidouri Z. , Zarbane Kh.

Identyfikatory

DOI

10.5604/01.3001.0016.1189

• Języki publikacji: EN

Abstrakty

EN

Purpose: The aim of this paper is to investigate experimentally the effect of large vibration of a cantilever and a fully free rectangular plate made by a Fused Filament Fabrication process. Furthermore, this investigation attempts to compare our measurements and those obtained in the literature experimentally. Design/methodology/approach: For this purpose, a test rig was designed and manufactured for all experimental trials. The plate was excited randomly and harmonically at large displacement respectively, to obtain the linear and non-linear frequencies parameter. Findings: The non-linear dynamic behaviour of our structure at forced vibration is figured by exciting the plate at large displacement. The dependence of frequency and amplitude vibration are examined for the first, second, and third mode shapes. The non-linear dynamic behaviour of cantilever plates is compared with literature to illustrate the convergence of our results by using our specific mechanical properties, printing parameters, and process. Furthermore, the non-dimensional comparison is shown by 33.38%, 5.83%, and 20.58% for the first, second, and third mode shapes, respectively. Research limitations/implications: Experimental tests will be performed on a 3D-printed metal plate to improve the present work. Practical implications: This work is intended to determine the dynamic proprieties of our parts in order to manufacture a safe and comfort machine. Originality/value: Actually, the dynamic behaviour of our 3D printing plates is compared with the obtained in the case of the isotropic plate for the aim to predict the convergence of both structures.

Słowa kluczowe

EN

fused filament; nonlinear dynamic behaviour; nonlinear transverse vibrations

PL

nieliniowe zachowanie dynamiczne; nieliniowe drgania poprzeczne

• Wydawca: International OCSCO World Press
• Czasopismo: Archives of Materials Science and Engineering
• Rocznik: 2022
• Tom: Vol. 116, nr 2
• Strony: 49--56
• Opis fizyczny: Bibliogr. 27 poz.

Twórcy

autor

Abdeddine E.

• Laboratory of Advanced Research in Industrial and Logistic Engineering (LARILE), National Higher School of Electricity and Mechanics, Hassan II University of Casablanca, Km7 Route El Jadida, Casablanca, Morocco

• https://orcid.org/0000-0002-0385-3928

autor

Majid A.

• Laboratory of Advanced Research in Industrial and Logistic Engineering (LARILE), National Higher School of Electricity and Mechanics, Hassan II University of Casablanca, Km7 Route El Jadida, Casablanca, Morocco

autor

Beidouri Z.

• Laboratory of Advanced Research in Industrial and Logistic Engineering (LARILE), National Higher School of Electricity and Mechanics, Hassan II University of Casablanca, Km7 Route El Jadida, Casablanca, Morocco

autor

Zarbane Kh.

• Laboratory of Advanced Research in Industrial and Logistic Engineering (LARILE), National Higher School of Electricity and Mechanics, Hassan II University of Casablanca, Km7 Route El Jadida, Casablanca, Morocco

Bibliografia

• [1] L.A. Dobrzański, L.B. Dobrzański, A.D. Dobrzańska- Danikiewicz, M. Kraszewska, Manufacturing powders of metals, their alloys and ceramics and the importance of conventional and additive technologies for products manufacturing in industry 4.0 stage, Archives of Materials Science and Engineering 102/1 (2020) 13-41. DOI: https://doi.org/10.5604/01.3001.0014.1452
• [2] M. Mrówka, M. Szymiczek, J. Lenża, Thermoplastic polyurethanes for mining application processing by 3D printing, Journal of Achievements in Materials and Manufacturing Engineering 95/1 (2019) 13-19. DOI: https://doi.org/10.5604/01.3001.0013.7620
• [3] T.D. Dikova, D.A. Dzhendov, D. Ivanov, K. Bliznakova, Dimensional accuracy and surface roughness of polymeric dental bridges produced by different 3D printing processes, Archives of Materials Science and Engineering 94/2 (2018) 65-75. DOI: https://doi.org/10.5604/01.3001.0012.8660
• [4] P.G. Ikonomov, A. Yahamed, P.D. Fleming, A. Pekarovicova, Design and testing 3D printed structures for bone replacements, Journal of Achievements in Materials and Manufacturing Engineering 101/2 (2020) 76-85. DOI: https://doi.org/10.5604/01.3001.0014.4922
• [5] P. Baras, J. Sawicki, Numerical analysis of mechanical properties of 3D printed aluminium components with variable core infill values, Journal of Achievements in Materials and Manufacturing Engineering 103/1 (2020) 16-24. DOI: https://doi.org/10.5604/01.3001.0014.6912
• [6] J. Taczała, W. Czepułkowska, B. Konieczny, J. Sokołowski, M. Kozakiewicz, P. Szymor, Comparison of 3D printing MJP and FDM technology in dentistry, Archives of Materials Science and Engineering 101/1 (2020) 32-40. DOI: https://doi.org/10.5604/01.3001.0013.9504
• [7] F. Ali, B.V. Chowdary, Natural Frequency prediction of FDM manufactured parts using ANN approach, IFAC-PapersOnLine 52/13 (2019) 403-408. DOI: https://doi.org/10.1016/j.ifacol.2019.11.083
• [8] O.A. Mohamed, S.H. Masood, J.L. Bhowmik, Experimental Investigations of Process Parameters Influence on Rheological Behavior and Dynamic Mechanical Properties of FDM Manufactured Parts, Materials and Manufacturing Processes 31/15 (2016) 1983-1994. DOI: https://doi.org/10.1080/10426914.2015.1127955
• [9] D. Jiang, D.E. Smith, Anisotropic mechanical properties of oriented carbonfiber filled polymer composites produced with fused filament fabrication, Additive Manufacturing 18 (2017) 84-94. DOI: https://doi.org/10.1016/j.addma.2017.08.006
• [10] S.K. Chaitanya, K.M. Reddy, S.N.S.H. Ch, Vibration Properties of 3D Printed/Rapid Prototype Parts, International Journal of Innovative Research in Science, Engineering and Technology 4/6 (2015) 4602- 4608. DOI: https://doi.org/10.15680/IJIRSET.2015.0406087
• [11] M.S. Azmi, R. Ismail, R. Hasan, M.R. Alkahari, T. Tokoroyama, Vibration analysis of FDM printed lattice structure bar, Proceedings of Sakura Symposium on Mechanical Science and Engineering, Nagoya University, Japan, 2017, 33-35.
• [12] M. Domingo-Espin, S. Borros, N. Agullo, A.A. Garcia- Granada, G. Reyes, Influence of Building Parameters on the Dynamic Mechanical Properties of Polycarbonate Fused Deposition Modeling Parts, 3D Printing and Additive Manufacturing 1/2 (2014) 70-77. DOI: https://doi.org/10.1089/3dp.2013.0007
• [13] S. Jiang, M. Zhan, M. Sun, W. Dai, C. Zhao, Experimental and Theoretical Analysis on the Dynamic Characteristics of Fused Filament Fabrication Plates, Shock and Vibration 2019 (2019) 1219435. DOI: https://doi.org/10.1155/2019/1219435
• [14] O.A. Mohamed, Analytical modeling and experimental investigation of product quality and mechanical properties in FDM additive manufacturing, PhD Thesis, Swinburne University of Technology Hawthorn, Victoria, Australia, 2017.
• [15] E.K. Njim, S.H. Bakhy, M. Al-Waily, Analytical and numerical free vibration analysis of porous functionally graded materials (FGPMs) sandwich plate using Rayleigh-Ritz method, Archives of Materials Science and Engineering 110/1 (2021) 27-41. DOI: https://doi.org/10.5604/01.3001.0015.3593
• [16] E.K. Njim, S.H. Bakhy, M. Al-Waily, Optimization design of vibration characterizations for functionally graded porous metal sandwich plate structure, Materials Today: Proceedings (2021) (Available online). DOI: https://doi.org/10.1016/j.matpr.2021.03.235
• [17] E.K. Njim, S.H. Bakhy, M. Al-Waily, Analytical and Numerical Investigation of Free Vibration Behavior for Sandwich Plate with Functionally Graded Porous Metal Core, Pertanika Journal of Science and Technology 29/3 (2021) 1655-1682. DOI: https://doi.org/10.47836/pjst.29.3.39
• [18] M.A. Al-Shammari, M.A. Husain, M. Al-Waily, Free vibration analysis of rectangular plates with cracked holes. AIP Conference Proceedings 2386 (2022) 040023. DOI: https://doi.org/10.1063/5.0066908
• [19] E.K. Njim, S.H. Bakhy, M. Al-Waily, Free vibration analysis of imperfect functionally graded sandwich plates: Analytical and experimental investigation, Archives of Materials Science and Engineering 111/2 (2021) 49-65. DOI: https://doi.org/10.5604/01.3001.0015.5805
• [20] S.H. Bakhy, M. Al-Waily, M.A. Al-Shammari, Analytical and numerical investigation of the free vibration of functionally graded materials sandwich beams, Archives of Materials Science and Engineering 110/2 (2021) 72-85. DOI: https://doi.org/10.5604/01.3001.0015.4314
• [21] F. Alijani, M. Amabili, Theory and experiments for non-linear vibrations of imperfect rectangular plates with free edges, Journal of Sound and Vibration 332/14 (2013) 3564-3588. DOI: https://doi.org/10.1016/j.jsv.2013.02.015
• [22] K.V. Singh, F. Khan, J. Veta, A.K. Singh, Influence of Printing Orientation on the Dynamic Characteristics and Vibration Behavior of 3D Printed Structures, Proceedings of the ASME 2017 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Vol. 1: 37th Computers and Information in Engineering Conference, Cleveland, Ohio, USA, 2017, V001T02A032. DOI: https://doi.org/10.1115/DETC2017-68289
• [23] S. Farah, D.G. Anderson, R. Langer, Physical and mechanical properties of PLA, and their functions in widespread applications — A comprehensive review, Advanced Drug Delivery Reviews 107 (2016) 367-392. DOI: https://doi.org/10.1016/j.addr.2016.06.012
• [24] S. Jiang, M. Zhan, M. Sun, W. Dai, C. Zhao, Experimental and Theoretical Analysis on the Dynamic Characteristics of Fused Filament Fabrication Plates, Shock and Vibration 2019 (2019) 1219435. DOI: https://doi.org/10.1155/2019/1219435
• [25] A. Majid, E. Abdeddine, K. Zarbane, Z. Beidouri, Geometrically non-linear forced transverse vibrations of C-S-C-S rectangular plate: Numerical and experimental investigations, Journal of Applied Nonlinear Dynamics 10/4 (2021) 739-757. DOI: https://doi.org/10.5890/JAND.2021.12.012
• [26] A. Majid, E. Abdeddine, K. Zarbane, Z. Beidouri, Geometrically non-linear free and forced vibration of C-F-C-F rectangular plate at large transverse amplitudes, Proceedings of the XI International Conference on Structural Dynamics “EURODYN 2020”, Athens, Greece, 2020, 225-238. DOI: https://doi.org/10.47964/1120.9018.19213
• [27] E. Abdeddine, A. Majid, Z. Beidouri, K. Zarbane, Non-linear longitudinal free vibration of uniform rods and rods with sections varying exponentially, Proceedings of the XI International Conference on Structural Dynamics “EURODYN 2020”, Athens, Greece, 2020, 239-251. DOI: https://doi.org/10.47964/1120.9019.19214

Uwagi

PL

Opracowanie rekordu ze środków MNiSW, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2024).