D-shape polymer optical fibres for surface plasmon resonance sensing

• Autorzy: Gasior K. , Martynkien T. , Wojcik G , Mergo P. , Urbanczyk W.

Identyfikatory

DOI

10.1016/j.opelre.2017.01.003

• Języki publikacji: EN

Abstrakty

EN

We experimentally studied three different D-shape polymer optical fibres with an exposed core for their applications as surface plasmon resonance sensors. The first one was a conventional D-shape fibre with no microstructure while in two others the fibre core was surrounded by two rings of air holes. In one of the microstructured fibres we introduced special absorbing inclusions placed outside the microstructure to attenuate leaky modes. We compared the performance of the surface plasmon resonance sensors based on the three fibres. We showed that the fibre bending enhances the resonance in all investigated fibres. The measured sensitivity of about 610 nm/RIU for the refractive index of glycerol solution around 1.350 is similar in all fabricated sensors. However, the spectral width of the resonance curve is significantly lower for the fibre with inclusions suppressing the leaky modes.

Słowa kluczowe

EN

surface plasmons; fibre optics sensor; polymer waveguides

• Wydawca: Stowarzyszenie Elektryków Polskich ; Polska Akademia Nauk ; Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
• Czasopismo: Opto-Electronics Review
• Rocznik: 2017
• Tom: Vol. 25, No. 1
• Strony: 1--5
• Opis fizyczny: Bibliogr. 29 poz., il., rys., wykr.

Twórcy

autor

Gasior K.

• Department of Optics and Photonics, Wroclaw University of Technology, Wybrzeze Wyspianskiego 27, 50-370 Wroclaw, Poland

autor

Martynkien T.

• Department of Optics and Photonics, Wroclaw University of Technology, Wybrzeze Wyspianskiego 27, 50-370 Wroclaw, Poland

autor

Wojcik G

• Laboratory of Optical Fibre Technology, Maria Curie-Sklodowska University, Marii Curie-Sklodowska Sq. 2, 20-031 Lublin, Poland

autor

Mergo P.

• Laboratory of Optical Fibre Technology, Maria Curie-Sklodowska University, Marii Curie-Sklodowska Sq. 2, 20-031 Lublin, Poland

autor

Urbanczyk W.

• Department of Optics and Photonics, Wroclaw University of Technology, Wybrzeze Wyspianskiego 27, 50-370 Wroclaw, Poland

Bibliografia

• [1] J. Homola, S. S. Yee, G. Gauglitz, Surface plasmon resonance sensors: review, Sens. Actuators B 54 (1999) 3-15.
• [2] J. Homola, Present and future of surface plasmon resonance biosensors, Anal. Bioanal. Chem. 377 (2003) 528-539.
• [3] I. Abdulhalim, M. Zourob, A. Lakhtakia, Surface plasmon resonance for biosensing: a mini-review, Electromagnetics 28 (2008) 214-242.
• [4] J. Homola, Optical fibre sensor based on surface plasmon excitation, Sens. Actuators B 29 (1995) 401-405.
• [5] J. Homola, R. Slavik, Fibre-optic sensor based on surface plasmon resonance, Electron. Lett. 32 (1996) 480-481.
• [6] R. Slavik, J. Homola, J. Ctyroky, Single-mode optical fibre surface plasmon resonance sensor, Sens. Actuators B 54 (1999) 74-79.
• [7] R. Slavik, J. Homola, E. Brynda, A miniature fibre optic surface plasmon resonance sensor for fast detection of staphylococcal enterotoxin B, Biosens. Bioelectron. 17 (2002) 591-595.
• [8] H. Y. Lin, W. H. Tsai, Y. C. Tsao, B. C. Sheu, Side-polished multimode fibre biosensor based on surface plasmon resonance with halogen light, Appl. Opt. 46 (2007) 800-806.
• [9] H. Suzuki, M. Sugimoto, Y. Matsui, J. Kondoh, Effects of gold film thickness on spectrum profile and sensitivity of a multimode-optical-fibre SPR sensor, Sens. Actuators B 132 (2008) 26-33.
• [10] C. Perrotton, N. Javahiraly, M. Slaman, B. Dam, P. Meyrueis, Fibre optic surface plasmon resonance sensor based on wavelength modulation for hydrogen sensing, Opt. Express 19 (2011) A1175-A1183.
• [11] R. Slavik, J. Homola, J. Ctyroky, E. Brynda, Novel spectral fibre optic sensor based on surface plasmon resonance, Sens. Actuators B 74 (2001) 106-111.
• [12] A. Trouillet, C. Ronot-Trioli, C. Veillas, H. Gagnaire, Chemical sensing by surface plasmon resonance in a multimode optical fibre, Pure Appl. Opt. 5(1996) 227-237.
• [13] N. Cennamo, G. D’Agostino, M. Pesavento, L. Zeni, High selectivity and sensitivity sensor based on MIP and SPR in tapered plastic optical fibres for the detection of L-nicotine, Sens. Actuators B 191 (2014) 529-536.
• [14] F. De-Jun, L. Guan-Xiu, L. Xi-Lu, J. Ming-Shun, S. Qing-Mei, Refractive index sensor based on plastic optical fibre with tapered structure, Appl. Opt. 53(2014) 2007-2011.
• [15] W. H. Tsai, Y. C. Tsao, H. Y. Lin, B. C. Sheu, Cross-point analysis for multimode fibre sensor based on surface plasmon resonance, Opt. Lett. 30 (2005)2209-2211.
• [16] Y. C. Lin, W. H. Tsai, Y. C. Tsao, J. K. Tai, An enhanced optical multimode fibre sensor based on surface plasmon resonance with cascaded structure, IEEE Photon. Technol. Lett. 20 (2008) 1287-1289.
• [17] Y. C. Lin, Characteristics of optical fibre refractive index sensor based on surface plasmon resonance, Microw. Opt. Technol. Lett. 55 (2013) 574-576.
• [18] N. Cennamo, D. Massarotti, L. Conte, L. Zeni, Low cost sensors based on SPR in a plastic optical fibre for biosensor implementation, Sensors 11 (2011)11752-11760.
• [19] N. Cennamo, D. Massarotti, R. Galatus, L. Conte, L. Zeni, Performance comparison of two sensors based on surface plasmon resonance in a plastic optical fibre, Sensors 13 (2013) 721-735.
• [20] V. Munoz-Berti, A. Lopez-Perez, B. Alen, J. L. Costa-Kramer, A. Garcia-Martin, M. Lomer, J. Lopez-Higuera, Low cost plastic optical fibre sensor based on surface plasmon resonance, Proc. SPIE 7653 (2010) 765327.
• [21] M. Hautakorpi, M. Mattinen, H. Ludvigsen, Surface-plasmon-resonance sensor based on three-hole microstructured optical fibre, Opt. Express 16 (2008) 8427-8432.
• [22] J. Boehm, A. François, H. Ebendorff-Heidepriem, T. M. Monro, Chemical deposition of silver for the fabrication of surface plasmon microstructured optical fibre sensors, Plasmonics 6 (2011) 133-136.
• [23] H. W. Lee, M. A. Schmidt, H. K. Tyagi, L. Prill Sempere, P. S. J. Russell, Polarization-dependent coupling to plasmon modes on submicron gold wire in photonic crystal fibre, Appl. Phys. Lett. 93 (2008) 111102.
• [24] M. Tian, P. Lu, L. Chen, C. Lv, D. Liu, All-solid D-shaped photonic fibre sensor based on surface plasmon resonance, Opt. Commun. 285 (2012) 1550-1554.
• [25] A. A. Wang, A. Docherty, B. T. Kuhlmey, F. M. Cox, M. C. J. Large, Side-hole fibre sensor based on surface plasmon resonance, Opt. Lett. 34 (2009) 3890-3892.
• [26] E. Klantsataya, A. François, A. Zuber, V. Torok, R. Kostecki, T. M. Monro, Exposed core microstructured optical fibre surface plasmon resonance biosensor, Proc. SPIE 8938 (2014) 89380X.
• [27] E. Klantsataya, A. François, H. Ebendorff-Heidepriem, P. Hoffmann, T. M. Monro, Surface plasmon scattering in exposed core optical fibre for enhanced resolution refractive index sensing, Sensors 15 (2015) 25090-25102.
• [28] K. Gasior, T. Martynkien, W. Urbanczyk, Effect of constructional parameters on the performance of a surface plasmon resonance sensor based on a multimode polymer optical fibre, Appl. Opt. 53 (2014) 8167-8174.
• [29] M. Arjmand, F. Chiavaioli, S. Berneschi, F. Baldini, M. Soltanolkotabi, C. Trono, Effect of induced inner curvature on refractive index sensitivity in internally tilted long-period gratings, Opt. Lett. 41 (2016) 1443-1446.

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017)