PL
|
EN
Szukaj
Przeglądaj
Pomoc
O bazie
test
Preferencje
Polski
English
Język
Widoczny
[Schowaj]
Abstrakt
10
20
50
100
Liczba wyników
Tom - szczegóły
Adres strony
Kopiuj
Tytuł artykułu
Vol. 56, iss. 2
Czasopismo
Archives of Metallurgy and Materials
Wydawca
Institute of Metallurgy and Materials Science of Polish Academy of Sciences
Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
Rocznik
2011
Identyfikatory
Zawartość wolumenu
Vol. 56, iss. 2
artykuł:
Repair Welding of SQV2A Pressure Vessel Steel by Temper Bead Techniques Without Post Welding Heat Treatment
(
Brziak P.
,
Łomozik M.
,
Mizuno R.
,
Matsuda F.
), s. 205-216
artykuł:
The Kinetics of Phase Transformations During Continuous Cooling of Ti6Al4V Alloy from the Diphase α+β Range
(
Dąbrowski R.
), s. 217-221
artykuł:
Examination of the Strength and Ductility of AA-1050 Material Shaped with the MUlti-Stage Deep Drawing Method
(
Karali M.
), s. 223-230
artykuł:
Massive, Volumetric and Energetic Effects of Coal Exchange between Coke and Exhaust Gases at Various Levels of Cupola Processing Stack
(
Longa W.
), s. 231-243
artykuł:
The effect of the strain path and the second phase particles on the microstructure and the texture evolution of the AA3104 alloy processed by ECAP
(
Paul H.
,
Baudin T.
,
Brisset F.
), s. 245-261
artykuł:
Detonation deposited Fe-Al coatings Part III: Morphology of the Ni(Cr) and Ni(Al) interlayers and Fe-Al coating sprayed onto the 045 steel substrate
(
Pawłowski A.
,
Senderowski C.
,
Bojar Z.
,
Bonarski J.
,
Major Ł.
), s. 262-269
artykuł:
Cyclic voltammetric studies of tellurium in diluted HNO3 solutions
(
Rudnik E.
,
Sobesto J.
), s. 270-277
artykuł:
Reconstruction of the boundary condition in the problem of the binary alloy solidification
(
Słota D.
), s. 278-285
artykuł:
Electrochemical synthesis of ZnO nanoparticles during anodic dissolution of zinc in alcohols solvents
(
Stypuła B.
,
Starowicz M.
,
Hajos M.
,
Olejnik E.
), s. 286-292
artykuł:
Microstructure and mechanical properties of Cr-Mn structural PM steels
(
Sułowski M.
,
Ciaś A.
), s. 293-303
artykuł:
Experimental study on thermodynamics of the Cu-Ni-Sn-Bi liquid alloys
(
Wnuk G.
), s. 305-310
artykuł:
Meta-stable conditions of diffusion brazing
(
Wołczyński W.
,
Okane T.
,
Senderowski C.
,
Kania B.
,
Zasada D.
,
Janczak-Rusch J.
), s. 311-323
artykuł:
Numerical models of hardening phenomena of tools steel base on the TTT and CCT diagrams
(
Domański T.
,
Bokota A.
), s. 325-344
artykuł:
Modelling of heat treatment of steel elements with the movement of coolant
(
Kulawik A.
,
Bokota A.
), s. 345-357
artykuł:
Numerical model of thermal and flow phenomena the process growing of the CC slab
(
Sowa L.
,
Bokota A.
), s. 359-366
artykuł:
The influence of thermal stresses and strand bending on surface defects formation in continuously cast strands
(
Hadała B.
,
Cebo-Rudnicka A.
,
Malinowski Z.
,
Gołdasz A.
), s. 367-377
artykuł:
Determination of friction coefficients at elevated temperatures for some Al, Mg and Ti alloys
(
Gontarz A.
,
Dziubińska A.
,
Okoń Ł.
), s. 379-384
artykuł:
Numerical modelling of the cooling ability of device for the plain round bars accelerated cooling process
(
Laber K.
,
Dyja H.
,
Kwapisz M.
), s. 385-392
artykuł:
Analysis of the stress concentration in the nanomultilayer coatings based on digital representation of the structure
(
Perzyński K.
,
Major Ł.
,
Madej Ł.
,
Pietrzyk M.
), s. 393-399
artykuł:
Investigation of thermomechanical properties of ferromagnetic NiFega shape memory alloy subjected to pseudoelastic compression test
(
Pieczyska E.
,
Dutkiewicz J.
,
Masdeu F.
,
Luckner J.
,
Maciak R.
), s. 401-408
artykuł:
Numerical simulation of thermal phenomena and phase transformations in laser-arc hybrid welded joints
(
Piekarska W.
,
Kubiak M.
,
Bokota A.
), s. 409-421
artykuł:
Analysis of spring-back during forming of the element made of AMS 5604 steel
(
Adamus J.
,
Lacki P.
,
Łyźniak J.
,
Zawadzki M.
), s. 422-430
artykuł:
Numerical simulation of the fine blanking process of sheet titanium
(
Adamus J.
,
Lacki P.
,
Więckowski W.
), s. 431-437
artykuł:
Technological problems and experimental investigation of hybrid: clinched - adhesively bonded joint
(
Balawender T.
,
Sadowski T.
,
Kneć M.
), s. 438-446
artykuł:
Physical simulation of controlled rolling and accelerated cooling for ultrafine-grained steel plates
(
Dyja H.
,
Knapiński M.
,
Kwapisz M.
,
Snopek J.
), s. 447-454
artykuł:
Modeling of heat source based on parameters of electron beam welding process
(
Lacki P.
,
Adamus K.
,
Wojsyk K.
,
Zawadzki M.
,
Nitkiewicz Z.
), s. 455-462
artykuł:
Changes in the bonding zone of explosively welded sheets
(
Paul H.
,
Faryna M.
,
Prażmowski M.
,
Bański R.
), s. 463-474
artykuł:
Studies of advanced technologies used in the manufacture of products from aluminium alloys
(
Senderski J.
,
Lech-Grega M.
,
Płonka B.
), s. 475-486
artykuł:
Analysis of the effect of the tool shape on the stress and strain distribution in the alternate extrusion and multiaxial compression process
(
Kwapisz M.
,
Knapiński M.
,
Dyja H.
,
Laber K.
), s. 487-493
artykuł:
Numerical modelling of the working rolls wear during rods rolling process
(
Szota P.
,
Mróz S.
,
Stefanik A.
,
Dyja H.
), s. 495-501
artykuł:
An extension of Burzyński hypothesis of material effort accounting for the third invariant of stress tensor
(
Pęcherski R. B.
,
Szeptyński P.
,
Nowak M.
), s. 503-508
artykuł:
Micromechanical model of polycrystalline materials with lamellar substructure
(
Kowalczyk-Gajewska K.
), s. 509-522
artykuł:
Modelling of microstructure changes during hot deformation using cellular automata
(
Kuc D.
,
Gawąd J.
), s. 523-532
artykuł:
Study on the influence of temperature, velocity and shape of tools on the combined process of extrusion and broaching of the deep sleeve with the bottom made of the AZ31 alloy
(
Michalczyk J.
,
Bajor T.
), s. 533-541
artykuł:
Determination of the critical value of normalized cocroft - latham criterion during multi slight rolling based on tensile test
(
Stefanik A.
,
Dyja H.
,
Mróz S.
), s. 543-549
artykuł:
Die profile optimization for forging constant velocity joint casings
(
Gronostajski Z.
,
Hawryluk M.
,
Kaszuba M.
,
Niechajowicz A.
,
Polak S.
,
Walczak S.
,
Jabłoński D.
), s. 551-558
artykuł:
Fuzzy logic application to strain-stress analysis in selected elastic-plastic material models
(
Skrzat A.
), s. 559-568
rozwiń roczniki
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.