PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Analiza bibliometryczna badań nad innowacjami w sektorach niskich technologii

Autorzy
Treść / Zawartość
Identyfikatory
Warianty tytułu
EN
Bibliometric analysis of research on innovations in the low technology sectors
Języki publikacji
PL
Abstrakty
PL
Celem artykułu jest zidentyfikowanie i przeanalizowanie głównych koncentracji w badaniach nad innowacjami w sektorach niskich technologii w zakresie istotnych ośrodków naukowo – badawczych, badaczy i czasopism. Przyjęto zestaw trzech pytań badawczych odpowiadających zakresom koncentracji określonym w celu artykułu. Do poszukiwania odpowiedzi na zestaw pytań zastosowano metodę analizy bibliometrycznej. Dane analityczne pochodzą z bazy Scopus z okresu 1977-2015. Okazało się, że ośrodkiem, w którym prowadzi się najwięcej badań z analizowanego zakresu jest hiszpański Universitat Politecnica de Valencia. Najwięcej badań, które uzyskały relatywnie wysoki sumaryczny indeks cytowań opublikował Hartmut Hirsch-Kreinsen. Jeżeli chodzi o najistotniejsze czasopisma skoncentrowane na innowacjach w sektorach niskich technologii to na szczególną uwagę zasługuje „Research Policy” i „Technovation”. Są to tytuły, gdzie opublikowano najwięcej artykułów, były one relatywnie wysoko cytowane a same czasopisma mają wysoki impact factor. Ogólny wniosek jest jednak taki, że ten obszar badawczy jest niszowy i mało atrakcyjny dla badaczy a tym samym wydaje się nieco zaniedbany.
EN
The aim of the article is to identify and analyze the main concentrations in research on innovations in the low technology sectors in terms of important research centers, researchers and journals. A set of three research questions was adopted according to the ranges of concentration specified in the article’s aim. The method of bibliometric analysis was used to search for a set of questions. The analytical data come from the Scopus database from 1977-2015. The center in which the most research in the analyzed area is conducted is the Spanish Universitat Politècnica de València. Hartmut Hirsch-Kreinsen published the most research, which was obtained by a relatively high total citations index. Regarding the most important journals focused on innovations in the low technology sectors, “Research Policy” and “Technovation” deserve attention. These are the titles where the most articles were published, they were relatively high quoted and the journals have a high impact factor. The general conclusion is that this research area is niche and unattractive to researchers and thus seems somewhat neglected.
Rocznik
Tom
Strony
703--711
Opis fizyczny
Bibliogr. 24 poz.
Twórcy
  • Uniwersytet Warszawski, Wydział Zarządzania
Bibliografia
  • 1. Albors-Garrigós, J., Hervas-Oliver, J.L., and Márquez, P. (2009). Internet and mature industries. Its role in the creation of value in the supply chain. The case of tile ceramic manufacturers and distributors in Spain. International Journal of Information Management, 29(6), 476-482. doi: https://doi.org/10.1016/j.ijinfomgt.2009.03.005.
  • 2. Bornmann, L., Daniel, H.-D. (2014). What do citation counts measure? A review of studies on citing behavior. Journal of Documentation, 64(1), 45-80. doi: https://doi.org/10.1108/ 00220410810844150.
  • 3. Chang, Y.-W. (2014). Exploring scientific articles contributed by industries in Taiwan. Scientometrics, 99(2), 599-613. doi: https://doi.org/10.1007/s11192-013-1222-2.
  • 4. Hansen, T., and Winther, L. (2011). Innovation, regional development and relations between high- and low-tech industries. European Urban and Regional Studies, 18(3), 321- 339. doi: https://doi.org/10.1177/0969776411403990.
  • 5. Hansen, T., and Winther, L. (2014). Competitive low-tech manufacturing and challenges for regional policy in the European context – lessons from the Danish experience. Cambridge Journal of Regions, Economy and Society, 7(3), 449-470. doi: https://doi.org/ 10.1093/cjres/rsu015.
  • 6. Hansen, T. (2010). The Danish fabricated metal industry: A competitive medium- low-tech industry in a highwage country. Geografisk Tidsskrift – Danish Journal of Geography, 110(1), 65-80. doi: https://doi.org/10.1080/00167223.2010.10669497.
  • 7. Hervas-Oliver, J.L., Albors Garrigos, J., Gil-Pechuan, I. (2011). Making sense of innovation by R&D and non-R&D innovators in low technology contexts: A forgotten lesson for policymakers. Technovation, 31(9), 427-446. doi: https://doi.org/10.1016/ j.technovation. 2011.06.006.
  • 8. Hervas-Oliver, J.L., Albors Garrigos, J., Miguel, B., and Hidalgo, A. (2012). The role of a firm’s absorptive capacity and the technology transfer process in clusters: How effective are technology centres in low-tech clusters? Entrepreneurship & Regional Development, 24(7-8), 523-559. doi: https://doi.org/10.1080/08985626.2012.710256.
  • 9. Hirch-Kreinsen, H., Jacobson, D., and Robertson, P.L. (2006). “Low-tech” industries: Innovativeness and development perspectives – A summary of a European research project. Prometheus, 24(1), 3-21. doi: https://doi.org/10.1080/08109020600563762.
  • 10. Hirch-Kreinsen, H. (2008a). Low-technology: a forgotten sector in Innovation policy. Journal of Technology Management & Innovation, 3(3), 11-20. doi: http://dx.doi.org/ 10.4067/S0718-27242008000100002.
  • 11. Hirch-Kreinsen, H. (2008b). “Low-Tech” Innovations. Industry and Innovation, 15(1), 19-43. doi: https://doi.org/10.1080/13662710701850691.
  • 12. Klincewicz, K. (2012). Bibliometria a inne techniki analityczne. W K. Klincewicz, M. Żemigała, i M. Mijal, Bibliometria w zarządzaniu technologiami i badaniami naukowymi (ss. 34-40). Warszawa: Ministerstwo Nauki i Szkolnictwa Wyższego.
  • 13. Klincewicz, K. (2008). Polska innowacyjność, analiza bibliometryczna. Warszawa: Wydawnictwo Naukowe Wydziału Zarządzania Uniwersytetu Warszawskiego.
  • 14. Klincewicz, K. (2009). Zastosowanie bibliometrii w naukach o zarządzaniu. Problemy Zarządzania, 7(4), 130-156.
  • 15. Kovacs, A., Looy, B., and Cassiman, B. (2015). Exploring the scope of open innovation: a bibliometric review of a decade of research. Scientometrics, 104(3), 951-983. doi: https://doi.org/10.1007/s11192-015-1628-0.
  • 16. Lindman, M., Scozzi, B., and Otero-Neira, C. (2008). Low-tech, small- and medium-sized enterprises and the practice of new product development: An international comparison. European Business Review, 20(1), 51-72. doi: https://doi.org/10.1108/09555340810843690.
  • 17. Otero-Neira, C., Fernandez Arias, M.J., and Lindman, M.T. (2013). Market Orientation and Entrepreneurial Proclivity: Antecedents of Innovation. Global Business Review, 14(3), 385-395. doi: https://doi.org/10.1177/0972150913496719.
  • 18. Otero-Neira, C., Lindman, M.T., and Fernandez, M.J. (2009). Innovation and performance in SME furniture industries: An international comparative case study. Marketing Intelligence & Planning, 27(2), 216-232. doi: https://doi.org/10.1108/02634500910944995.
  • 19. Pritchard, A. (1969). Statistical bibliography or bibliometrics. Journal of Documentation, 25(4), 348-349.
  • 20. Segui-Mas, E., Signes-Perez, E., Sarrion-Vines, F., and Vidal, J.A. (2016). Analisi bibliometrica de la literatura internacional sobre innovació oberta i capacitat d’absorció. Intagible Capital, 12(1), 51-72. doi: doi:10.3926/ic.685.
  • 21. Solla Price, D. (1976). A General Theory of Bibliometric and Other Cumulative Advantage Processes. Journal of the American Society for Information Science, 27(5), 292-306. doi: https://doi.org/10.1002/asi.4630270505.
  • 22. Sun, Y., and Grimes, S. (2016). The emerging dynamic structure of national innovation studies: a bibliometric analysis. Scientometrics, 106(1), 17-40. doi: https://doi.org/ 10.1007/s11192-015-1778-0.
  • 23. Volberda, H.W., Foss, N.J., and Lyles, M.A. (2010). Absorbing the Concept of Absorptive Capacity: How to Realize Its Potential in the Organization Field. Organization Science, 21(4), 931-951. doi: https://doi.org/10.1287/orsc.1090.0503.
  • 24. Żemigała, M. (2012). Bazy wykorzystywane do analiz biblio metrycznych. W K. Klincewicz, M. Żemigała, i M. Mijal, Bibliometria w zarządzaniu technologiami i badaniami naukowymi (ss. 144-221). Warszawa: Ministerstwo Nauki i Szkolnictwa Wyższego.
Uwagi
Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-ffa683cc-e503-4ed9-80d0-cf24d2910455
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.