Bamboo as a Construction Material: Prospects and Challenges

Fahim, Muhammad; Haris, Muhammad; Khan, Wajid; Zaman, Saeed

doi:10.12913/22998624/149737

Artykuł - szczegóły

Tytuł artykułu

Bamboo as a Construction Material: Prospects and Challenges

Autorzy

Fahim Muhammad , Haris Muhammad , Khan Wajid , Zaman Saeed

Treść / Zawartość

Pełne teksty:

Pobierz

Identyfikatory

DOI

10.12913/22998624/149737

Warianty tytułu

Języki publikacji

Abstrakty

Bamboo is a naturally available, fast growing and renewable resource. Bamboo plants are found all over the world in tropical and non-tropical regions. Asia pacific region is specifically rich in bamboo biodiversity. Due to high energy demand of existing construction materials and scarcity of other naturally available materials like wood, bamboo is a good alternative for construction. This paper reviews the mechanical properties and use of bamboo in construction. The tensile strength of different bamboo species varies in the range 70-210 MPa, compressive strength 20-65 MPa, elastic modulus 2500-17500 MPa, and modulus of rupture 50-200 MPa. Bamboo is a versatile material and can be used in construction in various ways. Bamboo can be engineered to specific need in construction such as laminated and scrimber bamboo. Engineered bamboo are used for various housing purposes such as roofing and flooring. Bamboo culms are often used directly without any alteration as structural members such as beams and columns. Bamboo can also be used as reinforcement in concrete as a replacement to steel. The shear and flexural behavior of bamboo reinforced concrete (BRC) beams is significantly better than plain concrete beams. Bamboo fibers reinforced concrete (BFRC) is a good alternative to existing synthetic fibers reinforced concrete such as glass and steel fibers. Development of standardized testing procedures and structural specifications utilizing existing and future research findings will pave the way towards an extensive use of bamboo in construction industry.

Słowa kluczowe

bamboo engineered bamboo reinforced concrete bamboo reinforced concrete bamboo fibers bamboo construction laminated bamboo

Wydawca

Lublin University of Technology
Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin

Czasopismo

Advances in Science and Technology. Research Journal

Rocznik

2022

Tom

Vol. 16, no 3

Strony

165--175

Opis fizyczny

Bibliogr. 83 poz., fig., tab.

Twórcy

autor

Fahim Muhammad

drmfahim@uetpeshawar.edu.pk

Civil Engineering Department, University of Engineering and Technology, Peshawar, Pakistan

https://orcid.org/0000-0001-8955-5165

autor

Haris Muhammad

Graduate student, Civil Engineering Department, University of Engineering and Technology, Peshawar, Pakistan

autor

Khan Wajid

Civil Engineering Department, University of Engineering and Technology, Peshawar, Pakistan

autor

Zaman Saeed

Civil Engineering Department, University of Engineering and Technology, Peshawar, Pakistan

Bibliografia

1. Kumar G., Ashish D.K. Review on feasibility of bamboo in modern construction. Jouranl of Civil Engineering. 2015; 2: 66–70.
2. Habibi S. Design concepts for the integration of bamboo in contemporary vernacular architecture. Architectural Engineering and Design Management. 2019; 15(6): 475–489.
3. Arber A. The Gramineae: a study of cereal, bamboo and grass: Cambridge University Press; 2010.
4. Liese W., Köhl M. Bamboo: the plant and its uses: Springer; 2015.
5. Liese W. Research on bamboo. Wood Science and Technology. 1987; 21(3): 189–209.
6. Ben-Zhi Z., Mao-Yi F., Jin-Zhong X., Xiao-Sheng Y., Zheng-Cai L. Ecological functions of bamboo forest: research and application. Journal of Forestry Research. 2005; 16(2): 143–147.
7. Parameswaran N., Liese W. On the fine structure of bamboo fibres. Wood Science and Technology. 1976; 10(4): 231–246.
8. Amada S., Ichikawa Y., Munekata T., Nagase Y., Shimizu H. Fiber texture and mechanical graded structure of bamboo. Composites Part B: Engineering. 1997; 28(1–2): 13–20.
9. Lobovikov M., Ball L., Paudel S., Guardia M., Piazza M., Wu J., et al. World bamboo resources: a thematic study prepared in the framework of the global forest resources assessment 2005: Food & Agriculture Org.; 2007.
10. Sharma Y. Editor Bamboos in the Asia Pacific Region. Bamboo research in Asia: proceedings of a workshop held in Singapore, 28–30 May 1980; 1980: IDRC, Ottawa, ON, CA.
11. Manandhar R., Kim J.-H, Kim J.-T. Environmental, social and economic sustainability of bamboo and bamboo-based construction materials in buildings. Journal of Asian Architecture and Building Engineering. 2019; 18(2): 49–59.
12. Song X., Zhou G., Jiang H., Yu S., Fu J., Li W., et al. Carbon sequestration by Chinese bamboo forests and their ecological benefits: assessment of potential, problems, and future challenges. Environmental Reviews. 2011; 19(NA): 418–428.
13. Bystriakova N., Kapos V., Lysenko I. Bamboo biodiversity: Africa, Madagascar and the Americas: UNEP/Earthprint; 2004.
14. Bystriakova N., Kapos V., Lysenko I., Stapleton C. Distribution and conservation status of forest bamboo biodiversity in the Asia-Pacific Region. Biodiversity & Conservation. 2003; 12(9): 1833–1841.
15. Ashaari Z., Mamat N. Traditional treatment of Malaysian bamboos: resistance towards white rot fungus and durability in service. Pakistan Journal of Biological Sciences. 2000; 3(9): 1453–1458.
16. Ashaari Z., Sahri M., Yusuf N. Improvement of bamboo resistance against stain fungus by water soaking. Bamboo 2000 International Symposium; 2000.
17. Kasim J. Properties of Particleboard and Particlefilled Thermoplastic Composite from Bamboo (Gigantochloa Scortecchinii) [Thesis]: Universiti Putra Malaysia; 1999.
18. Kardam V., Pant K., Satya S., Naik S. Scientific Investigation of Traditional Water Leaching Method for Bamboo Preservation. Bamboo Science & Culture. 2013; 26(1).
19. Chin S.C., Tee K.F., Tong F.S., Ong H.R., Gimbun J. Thermal and mechanical properties of bamboo fiber reinforced composites. Materials Today Communications. 2020; 23: 100876.
20. Xu W.T., Ren-cheng. Extracting natural bamboo fibers from crude bamboo fibers by caustic treatment. Biomass Chemical Engineering. 2006; 3.
21. Xu Y., Zhang M., Tu D., Sun J., Zhou L., Mujumdar A.S. A two-stage convective air and vacuum freeze-drying technique for bamboo shoots. International journal of food science technology. 2005; 40(6): 589–595.
22. Gatóo A., Sharma B., Bock M., Mulligan H, Ramage M.H. Sustainable structures: bamboo standards and building codes. Proceedings of the Institution of Civil Engineers – Engineering Sustainability. 2014; 167(5): 189–196.
23. ISO. International Standard ISO 22157–1: 2004 (E), Bamboo–determination of physical and mechanical properties–Part I: Requirements. ISO Geneva; 2004.
24. ISO. ISO 22156: 2004 (E): Bamboo–structural design. ISO Geneva, Switzerland; 2004.
25. BIS. IS 6874–2008: Method of tests for round bamboos. BIS New Delhi, India; 2008.
26. BIS. Section 3, Timber and Bamboo: 3B. BIS New Delhi, India; 2010.
27. BIS. IS 15912–2012: Structural design using bamboo–code of practice. BIS New Delhi, India; 2012.
28. International A. Standard test methods for small clear specimens of timber. ASTM D143. 2009. ASTM International United States; 2009.
29. International A. Standard specification for evaluation of structural composite lumber products. ASTM D5456–14b. ASTM International West Conshohocken, Pennsylvania; 2014.
30. Karthik S., Rao P.R.M., Awoyera P. Strength properties of bamboo and steel reinforced concrete containing manufactured sand and mineral admixtures. Journal of King Saud University-Engineering Sciences. 2017; 29(4): 400–406.
31. Nogata F., Takahashi H. Intelligent functionally graded material: bamboo. Composites Engineering. 1995; 5(7): 743–751.
32. Sharma B., Gatóo A., Ramage M.H. Effect of processing methods on the mechanical properties of engineered bamboo. Construction and Building Materials. 2015; 83: 95–101.
33. Huang D., Bian Y., Zhou A., Sheng B. Experimental study on stress–strain relationships and failure mechanisms of parallel strand bamboo made from phyllostachys. Construction and Building Materials. 2015; 77: 130–138.
34. Hamdan H., Hill C., Zaidon A., Anwar U., Latif M.A. Equilibrium moisture content and volumetric changes of Gigantochloa Scortechinii. Journal of Tropical Forest Science. 2007: 18–24.
35. Chen T., Shih C., Chen H. Determination of the moisture content at fiber saturation point of bamboo by nondestructive testing method with stress wave timer. Proc of the fifth world conf on timber engineering; 1998.
36. Xu Q., Harries K., Li X., Liu Q., Gottron J. Mechanical properties of structural bamboo following immersion in water. Engineering Structures. 2014; 81: 230–239.
37. Li X. Research on Mechanics and Failure Properties of Moso Bamboo: Master’s Thesis, Chinese Academy of Forestry, Beijing, China; 2009.
38. Wakchaure M., Kute S. Effect of moisture content on physical and mechanical properties of bamboo. 2012.
39. Amada S., Untao S. Fracture properties of bamboo Composites Part B: Engineering. 2001; 32(5): 451–459.
40. Espiloy Z.B. Physico-mechanical properties and anatomical relationships of some Philippine bamboos. International Bamboo Workshop China; 1985.
41. Ghavami K. Bamboo: Low cost and energy saving construction materials. Modern bamboo structures: CRC Press, 2008; 17–34.
42. Huang F., Guo W. Structural and mechanical properties of the spines from Echinocactus grusonii cactus. Journal of Materials Science. 2013; 48(16): 5420–5428.
43. Li H., Shen S. The mechanical properties of bamboo and vascular bundles. Journal of Materials Research. 2011; 26(21): 2749–2756.
44. Paudel S. Engineered bamboo as a building material. Modern Bamboo Structures: CRC Press, 2008; 45–52.
45. Rao K.M.M., Rao K.M. Extraction and tensile properties of natural fibers: Vakka, date and bamboo. Composite structures. 2007; 77(3): 288–295.
46. Soeprayitno T., Tobing L., Widjaja E.A. Why the sundanese of West Java Prefer Slope-inhabiting Gigantochloa pseudoarundinacea to those growing in the valley. International Workshop on Bamboo held in Cochin; 1988.
47. Tan T., Rahbar N., Allameh S., Kwofie S., Dissmore D., Ghavami K., et al. Mechanical properties of functionally graded hierarchical bamboo structures. Acta biomaterialia. 2011; 7(10): 3796–3803.
48. Nurdiah E.A. The potential of bamboo as building material in organic shaped buildings: Petra Christian University; 2016.
49. Pradhan N.P.N., Paraskeva T.S., Dimitrakopoulos E.G. Quasi-static reversed cyclic testing of multiculm bamboo members with steel connectors. Journal of Building Engineering. 2020; 27.
50. Liliefna L.D., Nugroho N., Karlinasari L., Sadiyo S. Development of low-tech laminated bamboo esterilla sheet made of thin-wall bamboo culm. Construction and Building Materials. 2020; 242.
51. Fang C.-H., Jiang Z.-H., Sun Z.-J., Liu H.-R., Zhang X.-B., Zhang R., et al. An overview on bamboo culm flattening. Construction and Building Materials. 2018; 171: 65–74.
52. Liu X., Smith G.D., Jiang Z., Bock M., Boeck F., Frith O., et al. Nomenclature for engineered bamboo. BioResources. 2016.
53. Tang G., Yin L., Li Z., Li Y., You L. Structural behaviors of bolted connections using laminated bamboo and steel plates. Structures. 2019; 20: 324–339.
54. Kumar A., Vlach T., Laiblova L., Hrouda M., Kasal B., Tywoniak J., et al. Engineered bamboo scrimber: Influence of density on the mechanical and water absorption properties. Construction and Building Materials. 2016; 127: 815–827.
55. Yu Y., Zhu R., Wu B., Hu Ya., Yu W. Fabrication, material properties, and application of bamboo scrimber. Wood Science and Technology. 2015; 49(1): 83–98.
56. Sharma B., van der Vegte A. Engineered bamboo for structural applications. Nonconventional and Vernacular Construction Materials: Elsevier, 2020; 597–623.
57. Bansal A.K., Zoolagud S. Bamboo composites: Material of the future. Journal of Bamboo and Rattan. 2002; 1(2): 119–130.
58. Ganapathy P., Huan-Ming Z., Zoolagud S., Turcke D., Espiloy Z. Bamboo panel boards a state-of-the-art review. 1999. Contract No.: No. 12
59. Muhtar. Experimental data from strengthening bamboo reinforcement using adhesives and hoseclamps. Data in brief. 2019; 27: 104827.
60. Ghavami K. Bamboo as reinforcement in structural concrete elements. Cement and Concrete Composites. 2005; 27(6): 637–649.
61. Terai M., Minami K. Fracture behavior and mechanical properties of bamboo reinforced concrete members. Procedia Engineering. 2011; 10: 2967–2972.
62. Mali P.R., Datta D. Experimental evaluation of bamboo reinforced concrete beams. Journal of Building Engineering. 2020; 28.
63. Umniati S., Dewi S.M., Nindyawati N., Susilo G.A.J.E. Experimental Study On Lateral Load Capacity of Bamboo RC Beam Column Joints Strengthened By Bamboo Mechanical Anchors. 2017.
64. Dewi S.M. The flexural behavior model of bamboo reinforced concrete beams using a hose clamp. MATEC Web of Conferences; EDP Sciences 2019.
65. Kankam C.K., Odum-Ewuakye B. Flexural behaviour of babadua reinforced one-way slabs subjected to third-point loading. Construction and building materials. 2001; 15(1): 27–33.
66. Moroz J., Lissel S., Hagel M. Performance of bamboo reinforced concrete masonry shear walls. Construction and Building Materials. 2014; 61: 125–137.
67. Lee J.-H. Influence of concrete strength combined with fiber content in the residual flexural strengths of fiber reinforced concrete. Composite Structures. 2017; 168: 216–225.
68. Dewi S.M., Wijaya M.N., editors. The use of bamboo fiber in reinforced concrete beam to reduce crack. AIP Conference Proceedings; 2017: AIP Publishing LLC.
69. Fahim M., Saeed M., Khan H., Gir A., Ullah S. Flexure Behavior of Carbon Fiber Reinforced Polymers Retrofitted RC Beams. 2022; 16(2): 188–195.
70. Awchat G.D. Cost-Benefit Analysis of Using Recycled Coarse Aggregate In Plain and Fiber Reinforced Concrete. 2021; 15(3): 233–242.
71. Ashori A., Nourbakhsh A. Reinforced polypropylene composites: effects of chemical compositions and particle size. Bioresource technology. 2010; 101(7): 2515–2519.
72. Jandas P., Mohanty S., Nayak S. Thermal properties and cold crystallization kinetics of surface-treated banana fiber (BF)-reinforced poly (lactic acid) (PLA) nanocomposites. Journal of thermal analysis and calorimetry. 2013; 114(3) :1265–1278.
73. Sethunarayanan R., Chockalingam S., Ramanathan R. Natural fiber reinforced concrete. Transportation Research Record. 1989; 1226: 57–60.
74. Yussuf A., Massoumi I., Hassan A. Comparison of polylactic acid/kenaf and polylactic acid/rise husk composites: the influence of the natural fibers on the mechanical, thermal and biodegradability properties. Journal of Polymers and the Environment. 2010; 18(3): 422–429.
75. Li Z., Wang L., Wang X. Compressive and flexural properties of hemp fiber reinforced concrete. Fibers and polymers. 2004; 5(3): 187–197.
76. Othuman Mydin M.A. Investigating the Effect of Sisal Fibre Content on Durability Properties of Lightweight Foamed Concrete. 2022; 16(2): 141–149.
77. Zea Escamilla E., Wallbaum H. Environmental savings from the use of vegetable fibres as concrete reinforcement. 6th International Structural Engineering and Construction Conference 2011.
78. Akiyama N., Irie S. Method of making bamboo fiber and inorganic body. Google Patents; 2000.
79. Zhang C., Huang Z., Chen G.W. Experimental research on bamboo fiber reinforced concrete. Applied Mechanics and Materials; Trans Tech Publ; 2013.
80. Wang X.D., Zhang C., Huang Z., Chen G.W. Impact experimental research on hybrid bamboo fiber and steel fiber reinforced concrete. Applied Mechanics and Materials; Trans Tech Publ; 2013.
81. Zhang X., Pan J.Y., Yang B. Experimental study on mechanical performance of bamboo fiber reinforced concrete. Applied Mechanics and Materials; Trans Tech Publ; 2012.
82. Terai M., Minami K. Basic Study on Mechanical Properties of Bamboo Fiber Reinforced Concrete. Global Thinking In Structural Engineering: Recent Achievements. 2012; 8: 17–24.
83. Kavitha S. Effect of bamboo fiber in self compacting concrete partially replacing cement with GGBS and alccofine. International Journal of Civil Engineering and Technology (IJCIET). 2017; 8: 158–166.

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).

Typ dokumentu

Bibliografia

Identyfikator YADDA

bwmeta1.element.baztech-ff55caca-fd29-45b8-a3db-ba8853a767a2