Modeling of fuels formation processes using Common Component Architecture (CCA)

• Autorzy: Gaska K. , Generowicz A.
• Języki publikacji: EN

Abstrakty

EN

The realization of technological processes with the utilization of formed fuels in associated thermal systems should be qualified by technical criteria, which means that elementary processes as well as factors of sustainable development, from a global viewpoint, must not be disturbed. The utilization of post-process waste should be preceded by detailed technical, ecological and economic analysis. The objective function defined in the optimization task assists in the decision process i.e. choosing a suitable solution. In order to optimize the mixing process of fuel components, a mathematical model of the forming process was created. The paper presents the optimization of parameters in the process of forming fuels using a modified simplex algorithm with a polynomial worktime. The calculation procedures outlined above are embodied in a numerical model programmed in the C++ (Microsoft Visual Studio 2010) high-level object-oriented language.

Słowa kluczowe

EN

numerical modelling; Fossil Fuel; optimization; Common Component Architecture (CCA); waste managemet

• Wydawca: Komitet Termodynamiki i Spalania PAN
• Czasopismo: Archivum Combustionis
• Rocznik: 2015
• Tom: Vol. 35 nr 1
• Strony: 9--20
• Opis fizyczny: Bibliogr. 9 poz., rys., tab.

Twórcy

autor

Gaska K.

• Silesian University of Technology Chair of Technologies and Installations for Waste Management ul. Konarskiego 18, 44-100 Gliwice, Poland

autor

Generowicz A.

• Cracow University of Technology Institute of Water Supply and Environmental Protection Warszawska 24, 31-155 Cracow, Poland, tel.: [phone]

Bibliografia

• [1] Cormen Thomas H., Leiserson Charles E., Rivest Ronald L., Introduction to algorithms, WNT, Warszawa, (1999).
• [2] Dumnicki R., Kasprzyk A., Kozłowski M., Object Oriented Analysis and Design, Helion. Gliwice, (1998).
• [3] Gaska K., Wandrasz A.J. (2008): Mathematical modeling of biomass fuels formation process, Waste Management Volume: 28, Issue: 6, pp. 973-985
• [4] Sysło M. M., Discrete Optimization Methods, PWN. Warszawa, (1999).
• [5] Wandrasz J.W. Kozioł M. et al, Research on the ADAL fuel combustion process in an OR16 boiler Typescript, KTiUZO. Gliwice, (2004).
• [6] Wandrasz J.W., et al, A report on performed research with data handling and issuing a certification on combustible properties of a ECOPRO biofuel substance produced in the Dobrowolscy, Ltd. meat-processing plant. Gliwice, (2004).
• [7] Wandrasz J.W., Wandrasz A.J., Formed fuels. Seidel Przywecki Publishing. Warszawa, (2006).
• [8] Siemons Roland V., How European waste will contribute to renewable energy. Energy Policy 30, 471-475, (2002).
• [9] Retsgaard J.Ch., Henriksen H.J., Modeling guidelines - terminology and guiding principles. Advances in Water Resources 27, 71-82, (2004).