Applicability of selected groups of roughness parameters for description of surface layer of flat-top “plateau” structures

• Autorzy: Kowalski M. , Wiśniewska M. , Karolczak P. , Stancekova D.

Identyfikatory

DOI

10.12913/22998624/65110

• Języki publikacji: EN

Abstrakty

EN

The aim of this study is to determine the usefulness of selected 2D roughness parameters for detecting changes of geometric features and the rate the quality of the surface generated in the process of honing combustion engines sleeves. The paper presents the importance of mathematical modeling of virtual surface topography with different participation of determined and random factor. The possibilities of modeling the flat-top “plateau” surface roughness characteristic for honed surface was showed. Suitability of application of the roughness parameter for description of the selected variable characteristics of roughness profiles were determined using the correlation coefficient and the additional evaluation index designated as t. Indicator t was used for comparing the percentage change of the tested value of modeled profile characteristics with changes selected for evaluation of the roughness parameters 2D.

Słowa kluczowe

EN

roughness parameters; flat-top “plateau” surface; honing

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2016
• Tom: Vol. 10, nr 32
• Strony: 32--39
• Opis fizyczny: Bibliogr. 14 poz., fig., tab.

Twórcy

autor

Kowalski M.

• Wrocław University of Science and Technology, Faculty of Mechanical Engineering, Łukasiewicza 5, 50-370 Wrocław, Poland

autor

Wiśniewska M.

• Wrocław University of Science and Technology, Faculty of Mechanical Engineering, Łukasiewicza 5, 50-370 Wrocław, Poland

autor

Karolczak P.

• Wrocław University of Science and Technology, Faculty of Mechanical Engineering, Łukasiewicza 5, 50-370 Wrocław, Poland

autor

Stancekova D.

• University of Žilina, Faculty of Mechanical Engineering, Univerzitna 1, 010 26, Žilina, Slovakia

Bibliografia

• 1. Buj-Corral I., Vivancos-Calvet J., Rodero-deLamo L. and Marco-Almagro Ll. Comparison between mathematical models for roughness obtained in test machine and in industrial machine in semifinish honing processes. Procedia Engineering, 132, 2015, 545–552.
• 2. Cichosz P. and Kowalski M. Modelowanie matematyczne topografii powierzchni płaskowierzchołkowych typu „plateau”. XXVII Naukowa Szkoła Obróbki Ściernej. Koszalin-Sarbinowo. Zeszyty Naukowe Wydziału Mechanicznego, Politechnika Koszalińska, 2004 195–202.
• 3. Buj-Coral I., Vivancos-Calvet J. and Coba Salcedo M. Use of roughness probability parameters to quantify the material removed in plateau-honing. International Journal of Machine Tools and Manufacture, 50(7), 2010, 621–629.
• 4. Cabanettes F., Dimkovski Z. and Rosén B.-G. Roughness variations in cylinder liners induced by honing tools’ wear. Precision Engineering, 41, 2015, 40–46.
• 5. Resizer R. and Pawlus P. Modelowanie profile nierówności powierzchni cylindrów po gładzeniu płaskowierzchołkowym. Pomiary Automatyka Robotyka, 6, 2012, 64–69.
• 6. Pawlus P., Cieslak T. and Mathia T. The study of cylinder liner plateau honing process. Journal of Materials Processing Technology, 209(20), 2009, 6078–6086.
• 7. Sunnen AG Official Website, (www.sunnen.pl).
• 8. Cichosz P., Kowalski M. and Kuzinowski M. Matematicko modelirane na topografijata na deterministicki povrsini. Matematyczne modelowanie topografii powierzchni zdeterminowanych. Scientific conference with international participation. Conference proceedings. University “Ss. Cyril and Methodius”, Skopje, Republic of Macedonia, 2004, 106–111.
• 9. Sadílek M., Kratochvíl J., Petrů J., Cep R., Zlámal T. and Stančeková D. Cutting tool wear monitoring with the use of impedance layers. Tehnicki Vjesnik, 21(3), 2014, 639–644.
• 10. Goeldel B., El Mansori M. and Dumur D. Simulation of roughness and surface texture evolution at macroscopic scale during cylinder honing process. Procedia CIRP, 8, 2013, 27–32.
• 11. Sivatte-Adroer M., Llanas-Parra X., Buj-Corral I. and Vivancos-Calvet J. Indirect model for roughness in rough honing processes based on artificial neural networks. Precision Engineering, 43(1), 2016, 505–513.
• 12. Deepak Lawrence K. and Ramamoorthy B. Multisurface topography targeted plateau honing for the processing of cylinder liner surfaces of automotive engines. Applied Surface Science, 365, 2016, 19–30.
• 13. Fulemová J. and Řehoř J. Influence of form factor of the cutting edge on tool life during finishing milling. Procedia Engineering. Vídeň, Elsevier, 2015, 682–688.
• 14. Valášek P., Müller M. and Hloch S. Recycling of corundum particles – two-body abrasive wear of polymeric composites based on waste. Tehnicki Vjesnik-Technical Gazette, 22(3), 2015, 567–572.

Uwagi

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.