Geometry Characterization of AISI 430 Stainless Steel Microstructuring Using Laser

• Autorzy: Moldovan Edit R. , Concheso Doria Carlos , Ocaña Moreno Jose Luis , Baltes Liana Sanda , Stanciu Elena Manuela , Croitoru Catalin , Pascu Alexandru , Tierean Mircea Horia

Identyfikatory

DOI

10.24425/amm.2022.137801

• Języki publikacji: EN

Abstrakty

EN

Laser-generated surface patterns provide the means for local mechanical interlocking between the joined materials, tunes the wettability of surfaces that come in contact, and generally are the main factor for bonding strength enhancement, especially between dissimilar materials. This paper presents the influence of different patterning overlays generated with a pulsed laser on the surface of stainless-steel sheets. For all experiments, an overlapping degree of 90% has been chosen between three different patterns, while the engraving speed, pulse frequency and number of passes have varied. The textured surfaces’ morphology was assessed through optical microscopy, and the roughness of the surfaces was correlated with the corresponding experimental parameters. The results have indicated promising insights for joining stainless steel to plastic materials, which is otherwise difficult to assess through usual welding techniques.

Słowa kluczowe

EN

microstructuring; laser; ferritic stainless steel; surface patterning

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2022
• Tom: Vol. 67, iss. 2
• Strony: 645--652
• Opis fizyczny: Bibliogr. 35 poz., fot., rys., tab., wykr.

Twórcy

autor

Moldovan Edit R.

• Transilvania University of Brasov, Brasov, Romania

• https://orcid.org/0000-0003-2428-2885

autor

Concheso Doria Carlos

• BSH Electrodomésticos España S.A., Zaragoza, Spain

• https://orcid.org/0000-0003-3758-5789

autor

Ocaña Moreno Jose Luis

• Universidad Politecnica de Madrid, Madrid, Spain

• https://orcid.org/0000-0001-9263-8404

autor

Baltes Liana Sanda

• Transilvania University of Brasov, Brasov, Romania

• https://orcid.org/0000-0002-2819-210X

autor

Stanciu Elena Manuela

• Transilvania University of Brasov, Brasov, Romania

• https://orcid.org/0000-0002-8025-4822

autor

Croitoru Catalin

• Transilvania University of Brasov, Brasov, Romania

• https://orcid.org/0000-0001-8505-6510

autor

Pascu Alexandru

• Transilvania University of Brasov, Brasov, Romania

• https://orcid.org/0000-0002-6371-9253

autor

Tierean Mircea Horia

• Transilvania University of Brasov, Brasov, Romania

• https://orcid.org/0000-0001-5185-3116

Bibliografia

• [1] K. Shimamoto, Y. Sekiguchi, C. Sato, Int. J. Adhes. Adhes. 67, 31-37 (2016).
• [2] K. Vand der Straeten, I. Burkhardt, A. Olowinsky, A. Gillner, Physcs. Proc. 83, 1137-1144 (2016).
• [3] R.A. Delgado-Ruız, J.L. Calvo-Guirado, P. Moreno, J. Guardia, G. Gomez-Moreno, J.E. Mate-Sanchez, P. Ramirez-Fernandez, F. Chiva, J. Biomed. Mater. Res. B Appl. Biomater. 96 (1), 91-100 (2011).
• [4] W. Liu, S. Liu, L. Wang, Coatings 9 (4), 249 (2019).
• [5] M. de la Cruz Lorenzo, M. Portillo, A. Albaladejo, Photon Lasers Med. 1 (3), 171-182 (2012).
• [6] G. Hu, K. Guan, L. Lu, J. Zhang, N. Lu, Y. Guan, Engineering 4(6), 822-830 (2018).
• [7] A. Carvalho, L. Grenho, M.H. Fernandes, A. Daskalova, A. Trifonov, I. Buchvarov, F.J. Monteiro, Ceram. Int. 46 (2), 1383-1389 (2020).
• [8] R. Ortiz, I. Aurrekoetxea-Rodríguez, M. Rommel, I. Quintana, M. dM Vivanco, J.L. Toca-Herrera, Polymers 10 (12), 1337 (2018).
• [9] N. Sirdeshmukh, G. Dongre, Mater. Today-Proc. 44, 2348-2355 (2021).
• [10] A.T.T. Nguyen, M. Brandt, A.C. Orifici, S. Feih, Int. J. Adhes. Adhes. 66, 81-92 (2016).
• [11] E. Rodriguez-Vidal, C. Sanz, J. Lambarri, J. Renard, V. Gantchenko, Physcs. Proc. 83, 1110-1117 (2016).
• [12] G. Dumitru, V. Romano, H.P. Weber, H. Haefke, Y. Gerbig, E. Pflüger, Appl. Phys. A 70, 485-487 (2000).
• [13] M. Adjim, R. Pillai, A. Bensaoula, D. Starikov, C. Boney, A. Saidane, J. Heat Transfer. 129 (7), 798-804 (2007).
• [14] M.R. Cardoso, V. Tribuzi, D.T. Balogh, L. Misoguti, C.R. Mendonc, Appl. Surf. Sci. 257, 3281-3284 (2011).
• [15] S. Itapu, D.G. Georgiev, V. Devabhaktuni, J. Electromagnet. Wave, 29 (12), 1547-1556 (2015).
• [16] J.E. Carey, PhD Thesis, Femtosecond-Laser Microstructuring of Silicon for Novel Optoelectronic Devices, Harvard University, Cambridge, Massachusetts, USA (2004).
• [17] C. Samoila, D. Ursutiu, A. Tavkhelidze, L. Jangidze, Z. Taliashvili, G. Skhiladze, M. Tierean, Nanotechnology 31 (3), 035301 (2020).
• [18] A. Guarnaccio, C. Belviso, P. Montano, F. Toschi, Sx. Orlando, G. Ciaccio, S. Ferreri, D. Trevisan, D. Mollica, G.P. Parisi, P. Dolce, A. Bellucci, A. De Stefanis, D.M. Trucchi, V. Valentini, A. Santagata, F. Cavalcante, A. Lettino, L. Medici, P.P. Ragone, V.G. Lambertini, Surf. Coat. Tech. 406, 126727 (2021).
• [19] E. Rodriguez-Vidal, C. Sanz, C. Soriano, J. Leunda, G. Verhaeghe, J. Mater. Process. Tech. 229, 668-677 (2016).
• [20] A. De Zanet, V. Casalegno, M. Salvo, Ceram. Int. 47, 7307-7320 (2021).
• [21] T. Czotscher, F. Vollertsen, Physcs. Proc. 83, 53-61 (2016).
• [22] J. Salstela, M. Suvanto, T.T. Pakkanen, Int. J. Adhes. Adhes. 66, 128-137 (2016).
• [23] S. Rauh, K. Wöbbeking, M. Li, W. Schade, E.G. Hübner, ChemPhysChem 21, 1644-1652 (2020).
• [24] W. Knapp, D. Djomani, J.F. Coulon, R. Grunchec, Physcs. Proc. 56, 791-800 (2014).
• [25] R. Matsuzaki, N. Tsukamoto, J. Taniguchi, Int. J. Adhes. Adhes. 68, 124-132 (2016).
• [26] E. Moldovan, M.H. Tierean, E.M. Stanciu, B. Transilvania Univ. 10 (1) 39-46 (2017).
• [27] J.P. Bergmann, M. Stambke, Physcs. Proc. 39, 84-91(2012).
• [28] A. Cenigaonaindia, F. Liébana, A. Lamikiz, Z. Echegoyen, Physcs. Proc. 39, 92-99 (2012).
• [29] P. Amend, S. Pfindel, M. Schmidt, Physcs. Proc. 41, 98-105 (2013).
• [30] X. Wang, P. Li, Z. Xu, X. Song, H. Liu, J. Mater. Process. Tech. 210, 1767-1771 (2010).
• [31] A. Roesner, S. Scheik, A. Olowinsky, A. Gillner, U. Reisgen, M. Schleser, Physcs. Proc. 12, 370-377 (2011).
• [32] F.L. Palmieri, M.A. Belcher, C.J. Wohl, K.Y. Blohowiak, J.W. Connell, Int. J. Adhes. Adhes. 68, 95-101 (2016).
• [33] E. Rodriguez-Vidal, J. Lambarri, C. Soriano, C. Sanz, G. Verhaeghe, Physcs. Proc. 56, 835-844 (2014).
• [34] K. Schricker, M. Stambke, J.P. Bergmann, K. Bräutigam, P. Henckell, Physcs. Proc. 56, 782-790 (2014).
• [35] A.V. Brover, L.D. D’yachenko, Met. Sci. Heat Treat. 51 (5-6), 292-296 (2009).

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).