The use of technology of spatial printing in designing the PZL-10W engine model

• Autorzy: Kowalski M. , Kotlarz W. , Zahorski T. , Ćwiek J.
• Języki publikacji: EN

Abstrakty

EN

The aim of this paper is to present the possibilities of using 3D spatial printing technology to create complex models, e.g. turbine helicopter engines, PZL-10W type, operated on the W-3 “Sokół” helicopter. We have presented the process of creating a spatial model using CAD software. It required a careful selection of the parts necessary for its manufacture as well as elimination of minor parts, which were insignificant from the functional and educational perspective of the model. We presented the type of printer which was used to prepare the model, and also its software. The verification of the correctness of designing the files for particular parts was made with Netfabb software. Proper verification affected the choice of files to be sent to the 3D printer software, where they underwent further slight changes concerning, among others, the thickness of the layers and the percentage of filling the interior of the individual parts of the engine. The printouts of the selected engine parts have been shown in the photographs. We also (briefly) described the processes of treatment of the parts, their labour intensity as well as the hardware used on a regular basis for this purpose. Finally, we discussed the assembly process of the entire engine. In conclusion, we stressed the importance of the model as a significant didactic aid which is to support the process of acquiring knowledge related to the construction, kinematics and operation of the turbine engine. We also specified the amount of used materials, labour consumption (in man-hours) with regard to the same printout of the parts as well as the finishing works.

Słowa kluczowe

EN

3D printing technology; spatial modelling; PZL-10W engine model

PL

technologie druku 3D; modelowanie przestrzenne; model silnika PZL-10W

• Wydawca: Faculty of Ocean Engineering and Ship Technology, Gdańsk University of Technology
• Czasopismo: Journal of Polish CIMEEAC
• Rocznik: 2016
• Tom: Vol. 11, no 1
• Strony: 103--110
• Opis fizyczny: Bibliogr. 7 poz., fot., tab.

Twórcy

autor

Kowalski M.

• Polish Air Force Academy ul. Dywizjonu 303 nr 35 08-521 Dęblin

autor

Kotlarz W.

• Polish Air Force Academy ul. Dywizjonu 303 nr 35 08-521 Dęblin

autor

Zahorski T.

• Polish Air Force Academy ul. Dywizjonu 303 nr 35 08-521 Dęblin

autor

Ćwiek J.

• Polish Air Force Academy ul. Dywizjonu 303 nr 35 08-521 Dęblin

Bibliografia

• [1] http://centrumdruku3d.pl/projektowanie-i-druk-3d-w-szkole-orlat-w-deblinie/
• [2] https://eu.makerbot.com/shop/en/en/
• [3] http://www.pwrze.com/gfx/wsk4/userfiles/wsk/produkcja_rodzima/zal_nr_1_pzl-10w_wersja_3pl.pdf
• [4] https://eu.makerbot.com/shop/en/3d-printer/replicator-z18/94/makerbot-replicator-z18
• [5] Ćwiek, Jakub, Aplikacja technologii druku 3D na podstawie modelu silnika PZL-10W,Praca Dyplomowa WSOSP Dęblin, 2015.
• [6] Kaziunas France A, Świat druku 3D. Przewodnik, HELION, Gliwice, 2014.
• [7] Zahorski Tomasz, Ćwiek Jakub, Przybyłek Paweł, Szczepaniak Robert, Sarnowski W Charakterystyka i wykorzystania technologii druku przestrzennego 3D, Technika Transportu Szynowego tts, 12/2015.

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.