Preparation of carbon nanotube embedded in polyacrylonitrile (PAN) nanofibre composites by electrospinning process

Pilehrood, M. K.; Heikkilä, P.; Harlin, A.

doi:10.2478/v10304-012-0001-0

Artykuł - szczegóły

Tytuł artykułu

Preparation of carbon nanotube embedded in polyacrylonitrile (PAN) nanofibre composites by electrospinning process

Autorzy

Pilehrood M. K. , Heikkilä P. , Harlin A.

Wybrane pełne teksty z tego czasopisma

Identyfikatory

DOI

10.2478/v10304-012-0001-0

Warianty tytułu

Języki publikacji

Abstrakty

Polyacrylonitrile (PAN) nanofibres and carbon nanotube (CNT) reinforced PAN nanofibres were successfully electrospun. A polymer plasticiser, ethylene carbonate (EC), was added into the PAN/CNT solutions. The average diameter of the fibres varied between 80 and 240 nm. This study investigated the effects of polymer concentration, CNT and EC on the morphological characteristics of electrospun PAN fibres. Electrospinning parameters were set at constant values to prevent their mutual influences on the resultant morphology. It was observed that increasing the polymer concentration led to a reduction of beads density and an increase in the diameter of the PAN nanofibres. The fibre diameters also increased as a result of the addition of CNTs below the electrical percolation threshold. It was found that the inclusion of EC permits changes in the morphological characteristic of the PAN/CNT nanocomposite fibre regardless of the effects of its conductivity and viscosity.

Słowa kluczowe

nanocomposites electrospinning nanofibres polymer concentration carbon nanotube

nanokompozyty elektroprzędzenie nanowłókna stężenie polimeru nanorurki węglowe

Wydawca

Lodz University of Technology, Faculty of Material Technologies and Textile Design

Czasopismo

Autex Research Journal

Rocznik

2012

Tom

Vol. 12, no. 1

Strony

1--6

Opis fizyczny

Bibliogr. 52 poz.

Twórcy

autor

Pilehrood M. K.

mohammad.kazemi@tut.fi

Department of Materials Science, Tampere University of Technology, Tampere, Finland

autor

Heikkilä P.

Department of Materials Science, Tampere University of Technology, Tampere, Finland

autor

Harlin A.

VTT Technical Research Centre of Finland, Finland

Bibliografia

1. D. Li and Y. Xia, Advanced Materials, 16, 1151 (2004).
2. W. J. Li, C. T. Laurencin, E. J. Caterson, R. S. Tuan and F. K. Ko, Biomedical Materials Research, 60, 613 (2002).
3. Z. Ma, M. Kotaki, R. Inai and S. Ramakrishna, Tissue Engneering, 11, 101 (2005).
4. P. Heikkilä, Ph. D. Dissertation, Tampere University of Technology, 2008.
5. C. Kim, Y. O. Choi, W. J. Lee and K. S. Yang, Electrochimica Acta, 50, 883 (2004).
6. C. Kim, K. S. Yang and W. J. Lee, Electrochemical and Solid-State Letters, 7, 397 (2004).
7. C. Kim, S. H. Park, W. J. Lee and K. S. Yang, Electrochimica Acta, 50, 877 (2004).
8. C. Kim and K. S. Yang, Applied physics letters, 83, 1216 (2003).
9. C. Kim, B. T. N. Ngoc, K. S. Yang, M. Kojima, Y. A. Kim, Y. J. Kim, M. Endo and S. C. Yang, Advanced Materials, 19, 2341 (2007).
10. C. Tekmen, Y. Tsunekawa and H. Nakanishi, Journal of Materials Processing Technology, 210, 451 (2010).
11. V. Romeo, G. Gorrasi and V. Vittoria, Biomacromolecules, 8, 3147 (2007).
12. P. Heikkilä and A. Harlin, Express Polymer Letters, 3, 437 (2009).
13. M. S. Dresselhaus, G. Dresselhaus, J. C. Charlier and E. Hernández, Philosophical Transactions of the Royal Society A, 362, 2065 (2004).
14. C. Lu and Y. W. Mai, Journal of Materials Science, 43, 6012 (2008).
15. V. Gutpa and N. Miura, Electrochimica Acta, 52, 1721 (2006).
16. M. Hughes, G. Z. Chen, M. S. P. Shaffer, D. J. Fray and A. H. Windle, Chemistry of Materials, 14, 1610 (2002).
17. K. H. An, W. S. Kim, Y. S. Park, Y. C. Choi, S. M. Lee, D.C. Chung, D. J. Bae, S. C. Lim and Y.H. Lee, Advanced Materials, 13, 497 (2001).
18. E. Frackowiak, Physical Chemistry Chemical Physics, 9, 1774 (2007).
19. F. Ko, Y. Gogotsi, A. Ali, N. Naguib, H. Ye, G. L. Yang, C. Li and P. Willis, Advanced Materials, 15, 1161 (2003).
20. E. J. Ra, K. H. An, K. K. Kim, S. Y. Jeong and Y. H. Lee, Chemical Physics Letters, 413, 188 (2005).
21. S. Megelski, J. S. Stephens, D. B. Chase and J. F. Rabolt, Macromolecules, 35, 8456 (2002).
22. K. H. Lee, H. Y. Kim, H. J. Bang, Y. H. Jung and S. G. Lee, Polymer, 44, 4029 (2003).
23. S. A. Theron, E. Zussman and A. L. Yarin, Polymer, 45, 2017 (2004).
24. S. H. Tan, R. Inai, M. Kotaki and S. Ramakrishna, Polymer, 46, 6128 (2005).
25. P. Gupta, C. Elkins, T. E. Long and G. L. Wilkes, Polymer, 46, 4799 (2005).
26. G. T. Kim, J. S. Lee, J. H. Shin, Y. C. Ahn, Y. J. Hwang, H. S. Shin, J. K. Lee and C. M. Sung, Korean journal of Chemical Engineering, 22, 783 (2005).
27. H. Fong, I. Chun and D. H. Reneker, Polymer, 40, 4585 (1999).
28. S. Talwar, J. Hinestroza, B. Pourdeyhimi and S. A. Khan, Macromolecules, 41, 4275 (2008).
29. S. Ramakrishna, K. Fujihara, W. E. Teo, T. C. Lim and Z. Ma,” An Introduction to Electrospinning and Nanofibers”, pp 92, 96, 98, World Scientific Publishing Company, Singapore, 2005.
30. M. M. Hohman, M. Shin, G. Rutledge and M. P. Brenner, Physics of Fluids, 13, 2201 (2001).
31. W. Zuo, M. Zhu, W. Yang, H. Yu, Y. Chen and Y. Zhang, Polymer Engineering and Science, 45, 704 (2005).
32. Y. M. Shin, M. M. Hohman, M. P. Brenner and G. C. Rutledge, Applied Physics Letter, 78, 1149 (2001).
33. S. Mazinani, A. Ajji and C. Dubois, Polymer, 50, 3329 (2009).
34. C. Seoul, Y. T. Kim and C. K. Baek, Journal of Polymer Science Part B: Polymer Physics, 41, 1572 (2003).
35. J. Li, P. C. Ma, W. S. Chow, C. K. To, B. Z. Tang and J. K. Kim, Advanced Functional Materials, 17, 3207 (2007).
36. P. Heikkilä, L. Söderlund, J. Uusimäki, L. kettunen and A. Harlin, Polymer Engineering and Science, 47, 2065 (2007).
37. T. Han, A. L. Yarin and D. H. Reneker, Polymer, 49, 1651 (2008).
38. M. E. Helgeson, K. N. Grammatikos, J. M. Deitzel and N. J. Wagner, Polymer, 49, 2924 (2008).
39. A. L. Yarin, W. Kataphinan and D. H. Reneker, Journal of Applied Physics, 98, 064501 (2005).
40. J. H. Yu, S. V. Fridrikh and G. C. Rutledge, Polymer, 47, 4789 (2006).
41. P. Cassagnau, Polymer, 44, 2455 (2003).
42. Y. S. Song and J. R. Youn, Carbon, 43, 1378 (2005).
43. A. S. Sarvestani and E. Jabbari, Macromolecular Theory and Simulation, 16, 378 (2007).
44. A. S. Sarvestani, C. R. Picu, Rheologica Acta, 45, 132 (2005).
45. L. Vaisman, E. Wachtel, H. D. Wagner and G. Marom, Polymer, 48, 6843 (2007).
46. Z. Bashir, S. P. Church and D. M. Price, Acta Polymerica, 44, 211 (1993).
47. Z. Wang, B. Huang, H. Huang, R. Xue, L. Chen and F. Wang, Journal of Raman spectroscopy, 27, 609 (1996).
48. S. L. Shenoy, W. D. Bates, H. L. Frisch and G. E. Wnek, Polymer, 46, 3372 (2005).
49. J. H. Sung, H. S. Kim, H. J. Jin, H. J. Choi and I. J. Chin, Macromolecules, 37, 9899 (2004).
50. G. Wypych,” Hand Book of Plasticizer”, pp 108-110, ChemTec Publishing, Toronto, 2004.
51. T. Wunderlich, M. Stelter, T. Tripathy, B. R. Nayak, G. Brenn, A. L. Yarin, R. P. Singh, P. O. Brunn and F. Durst, Journal of Applied Polymer Science, 77, 3200 (2000).
52. M. Wang, A. J. Hsieh and G. C. Rutledge, Polymer, 46, 3407 (2005).

Typ dokumentu

Bibliografia

Identyfikator YADDA

bwmeta1.element.baztech-ff00d9d1-76da-4f77-9f57-7db02c8548d1