Improvement of the Properties of Ti6Al7Nb Titanium Alloy in Terms of the Type of Surface Modification

• Autorzy: Woźniak A. , Bialas O. , Adamiak M.

Identyfikatory

DOI

10.24425/amm.2020.132813

• Języki publikacji: EN

Abstrakty

EN

The paper presents the influence of ZrO₂ coating on Ti6Al7Nb titanium alloy depending on the method of deposition. The coatings were made by sol-gel method and atomic layer deposition (ALD). Wettability tests, pitting corrosion assessment and electrochemical impedance spectroscopy (EIS) were carried out in the paper. Complementary macro- and microscopic observations, roughness analysis by profilometric method and atomic force microscopy (AFM) were made. Based on the results obtained, it can be concluded that the type of method of depositing the layer on the surface of the material has a significant influence on its properties and that it should be taken into account during the process of the material improvement. Drawing on the findings presented, it can be inferred that roughness has a significant impact upon the surface wetttability of the tested surfaces and their related corrosion resistance. The obtainment of hydrophobic surfaces is for smaller rougidity values.

Słowa kluczowe

EN

titanium alloys; sol-gel method; ZrO2 coating; EIS; AFM

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2020
• Tom: Vol. 65, iss. 2
• Strony: 735--741
• Opis fizyczny: Bibliogr. 24 poz., rys., tab.

Twórcy

autor

Woźniak A.

• Silesian University of Technology, Faculty of Mechanical Engineering, Department of Engineering Materials and Biomaterials, 18 A Konarskiego Str., 44-100, Gliwice, Poland

autor

Bialas O.

• Silesian University of Technology, Faculty of Mechanical Engineering, Department of Engineering Materials and Biomaterials, 18 A Konarskiego Str., 44-100, Gliwice, Poland

autor

Adamiak M.

• Silesian University of Technology, Faculty of Mechanical Engineering, Department of Engineering Materials and Biomaterials, 18 A Konarskiego Str., 44-100, Gliwice, Poland

Bibliografia

• [1] J. C. B. Alcázar, R. M. J. Lemos, M. C. M. Conde, L. A. Chisini, M. M. S. Salas, B. S. Noremberg, F. V. Motta da, F. F. Demarco, S. B. C. Tarquinio, N. L. V Carreño, Prog Org Coat. 130, 206-213 (2019).
• [2] O. Bialas, J. Żmudzki, J. Achiev. Mater. Manuf. Eng 92, 29-35 (2019).
• [3] T. Burakowski, Inżynieria powierzchni metali: podstawy, urządzenia, technologie, Wydawnictwo Naukowo-Techniczne, Warszawa (1995).
• [4] M. Catauro, F. Barrino, M. Bononi, E. Colombini, R. Giovanardi, P. Veronesi, E. Tranquillo, Coatings 9, 200 (2019), https://doi.org/10.3390/coatings9030200.
• [5] R. G. Craig, J. M. Powers, R. L. Sakaguchi, H. Limanowska-Shaw, J. G. Shaw, E. Andrzejewska, Materiały stomatologiczne, Elsevier Urban & Partner, Wrocław 127-141 (2008).
• [6] D. S. Juan, Y. Wang, F. Chen, Yu X. Quan, Y. Fa Zhang, T. Nonferr. Metal. Soc. 23, 3027-3032 (2013).
• [7] J. Frostevarg, R. Olsson, J. Powell, A. Palmquist, R. Brånemark, Appl. Surf. Sci. 485, 158-169 (2019).
• [8] W. He, X. Yin, L. Xie, Z. Liu, J. Li, S. Zou, J. Chen, J. Mater. Sci-Mater. M. 30 (2019).
• [9] A. Liber-Kneć, S. D. Łagan, Ćwiczenia laboratoryjne z biomateriałów: pomoc dydaktyczna, Politechnika Krakowska, Kraków (2011).
• [10] M. Krzywicka, J. Grudziński, Motrol. 16 (1), 49-54 (2014).
• [11] J. Marciniak, Biomateriały, Wydawnictwo Politechniki Śląskiej, Gliwice, 178-324 (2002).
• [12] J. Marciniak, W. Chrzanowski, A. Kajzer, Gwoździowanie śródszpikowe w osteosyntezie, Wydawnictwo Politechniki Śląskiej, Gliwice, 89-188 (2006).
• [13] J. Marciniak, M. Kaczmarek, A. Ziębowicz, Biomateriały w stomatologii, Wydawnictwo Politechniki Śląskiej, Gliwice, 121-185 (2008).
• [14] A. Miklaszewski, M. Jurczyk, Weld. Tech. Rev. 83, 65-69 (2011).
• [15] C. E. Misch, Contemporary implant dentistry, Mosby Elsevier, St. Louis (2008).
• [16] B. E., Pippenger, M. Rottmar, B. S. Kopf, S. Stübinger, F. H. Dalla Torre, S. Berner, Maniura-Weber, Clin. Oral. Implan. Res. 30, 99-110 (2019).
• [17] W. Walke, Z. Paszenda, P. Karasiński, J. Marciniak, Arch. Mater. Sci. Eng. 55, 78-84 (2012).
• [18] https://www.who.int/gho/mortality_burden_disease/life_tables/situation_trends_life_expectancy/en/
• [19] D. Buddy Rathner, Biomaterials science: an introduction to materials in medicine, Elsevier Academic Press, Amsterdam (2004).
• [20] R. L. Williams, Surface modification of biomaterials: methods, analysis and applications, Woodhead Pub, Philadelphia (2011).
• [21] PN-EN ISO 5832-11.
• [22] A. Ziębowicz, A. Woźniak, B. Ziębowicz, M. Adamiak, P. Boryło, Arch. Mater. Sci. Eng. 89 (1), 20-26 (2018).
• [23] A. Ziębowicz, A. Woźniak, B. Ziębowicz, Springer, 349-357 (2017).
• [24] B. Ziębowicz, A. Woźniak, A. Ziębowicz, A. Ziembińska-Buczyńska, J. Achiev. Mater. Manuf. Eng. 93, 32-40 (2019).

Uwagi

PL

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).