Using the explosive cladding method for production of Mg-Al bimetallic bars

• Autorzy: Mroz S. , Stradomski G. , Dyja H. , Galka A.

Identyfikatory

DOI

10.1016/j.acme.2014.12.003

• Języki publikacji: EN

Abstrakty

EN

The paper presents the results of the production of semi-finished products in the form of magnesium-aluminium round bimetallic bars by the explosive cladding method. The system of samples consisted of an aluminium tube (1050 grade) and magnesium bar (grade AZ31) was prepared. The analysis of microstructure, mocrohardness and mechanical tests of the joint quality was carried out. On the basis of obtained results it was found that the explosive cladding parameters used to obtain the semi-finished bimetallic product characterized by a slight ovality and uniform distribution of the cladding layer on the core perimeter.

Słowa kluczowe

EN

Mg-Al bimetallic bars; explosive cladding; bond strength

PL

przyczepność; wybuchowość; mikrostruktura

• Wydawca: Springer ; Wrocław University of Science and Technology
• Czasopismo: Archives of Civil and Mechanical Engineering
• Rocznik: 2015
• Tom: Vol. 15, no. 2
• Strony: 317--323
• Opis fizyczny: Bibliogr. 11 poz., rys., tab., wykr.

Twórcy

autor

Mroz S.

• Czestochowa University of Technology, Faculty of Production Engineering and Materials Technology, Institute of Metal Forming and Safety Engineering, Armii Krajowej 19, 42-200 Czestochowa, Poland

autor

Stradomski G.

• Czestochowa University of Technology, Faculty of Production Engineering and Materials Technology, Institute of Metal Forming and Safety Engineering, Armii Krajowej 19, 42-200 Czestochowa, Poland

autor

Dyja H.

• Czestochowa University of Technology, Faculty of Production Engineering and Materials Technology, Institute of Metal Forming and Safety Engineering, Armii Krajowej 19, 42-200 Czestochowa, Poland

autor

Galka A.

• Explomet S.J., Oswiecimska 100H, 45-641 Opole, Poland

Bibliografia

• [1] R. Kawalla, M. Oswald, C. Schmidt, M. Ullmann, H.P. Vogt, N. D. Cuong, New technology for the production of magnesium strips and sheets, Metalurgija 47 (3) (2008) 195–198.
• [2] W.G. Kelvin, A review of magnesium/magnesium alloys corrosion and its protection, Recent Patents on Corrosion Science 2 (2010) 13–21.
• [3] H. Dyja, A. Maranda, R. Trebinski, Explosive technology in the materials science, in: Czestochowa University of Technology, Series: Metallurgy, No. 20, Czestochowa, 2001 (in Polish).
• [4] A. Pietrusiak, H. Bala, H. Dyja, S. Mroz, S. Sawicki, P. Sygut, Corrosion resistance of bimetallic ribbed bars produced by the explosive cladding method, Corrosion Protection 53 (4–5) (2010) 298–301 (in Polish).
• [5] S. Sawicki, H. Dyja, S. Mroz, Rolling of ribbed bars from bimetallic feedstock produced by explosive cladding and surfacing method TIG, Steel Research International, Special Edition, in: Proceedings of the 14th International Conference on Metal Forming, Krakow, Poland, 2012.
• [6] G. Stradomski, D. Rydz, H. Dyja, Bimetal plate St3S + Cu, Metalurgija 44 (2) (2005) 147–150.
• [7] S. Wasek, S. Mroz, G. Stradomski, K. Laber, The analysis of Al- Cu bimetallic bars bond layers joined by the explosive method, Solid State Phenomena 199 (2013) 508–513.
• [8] H. Dyja, S. Mroz, Z. Stradomski, Properties of joint in the bimetallic rods Cu-Al and Cu-steel after explosive cladding and the process of rolling, Metalurgija 42 (3) (2003) 185–191.
• [9] A. Dziadon, R. Mola, L. Blaz, Formation of layered Mg-eutectic composite using diffusional processes at the Mg–Al interface, Archives of Metallurgy and Materials 56 (3) (2011) 677–684.
• [10] R. Mola, Fabrication and microstructural characterization of Al/Zn-enriched layers on pure magnesium, Materials Characterization 78 (2013) 121–128.
• [11] R. Mola, K. Jagielska-Wiaderek, Formation of Al-enriched surface layers through reaction at the Mg-substrate/Al-powder interface, Surface and Interface Analysis 46 (8) (2014) 577–580.