Influence of Annealing Treatment on Deep Drawing Behavior of Q235 Carbon Steel /410/304 Stainless Steels Three-Layer Composite Plate

• Autorzy: Lv Zehua , Zhang Zhixiong , Han Jianchao , Wang Tao

Identyfikatory

DOI

10.24425/amm.2022.137773

• Języki publikacji: EN

Abstrakty

EN

Effect of annealing treatment on deep drawing behavior of hot-rolled Q235 carbon steel/410/304 stainless steel three-layer composite plate was investigated. Deep drawability of the unannealed composite plates exhibits a sharp difference for various contact surfaces with the die. The limit drawing ratio (LDR) of the composite plate with the carbon steel contacting the die is 1.75, while it is 1.83 with the stainless steel contacting the die due to the different mechanical responses to the tensile stress at the corner of the die. After annealing at 900°C for 2 h, however, the deep drawabilities of the composite plates both for various contact surfaces with the die are significantly improved and becomes almost identical, which are attributed to the stress relief, the enhanced ductility and the improved interface bonding strength of the hot-rolled component plates during annealing.

Słowa kluczowe

EN

composite plate; deep drawing; annealing; microstructure

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2022
• Tom: Vol. 67, iss. 2
• Strony: 421--433
• Opis fizyczny: Bibliogr. 30 poz., fot., rys., tab.

Twórcy

autor

Lv Zehua

• Taiyuan University of Technology, College of Mechanical and Vehicle Engineering, Taiyuan 030024, PR China
• Taiyuan University of Technology, Engineering Research Center of Advanced Metal Composites Forming Technology and Equipment, Ministry of Education, Taiyuan 030024, PR China
• Taiyuan University of Technology, TYUT-UOW Joint Research Centre, Taiyuan 030024, PR China

autor

Zhang Zhixiong

• Taiyuan University of Technology, College of Mechanical and Vehicle Engineering, Taiyuan 030024, PR China
• Taiyuan University of Technology, Engineering Research Center of Advanced Metal Composites Forming Technology and Equipment, Ministry of Education, Taiyuan 030024, PR China
• Taiyuan University of Technology, TYUT-UOW Joint Research Centre, Taiyuan 030024, PR China

autor

Han Jianchao

• Taiyuan University of Technology, College of Mechanical and Vehicle Engineering, Taiyuan 030024, PR China
• Taiyuan University of Technology, Engineering Research Center of Advanced Metal Composites Forming Technology and Equipment, Ministry of Education, Taiyuan 030024, PR China
• Taiyuan University of Technology, TYUT-UOW Joint Research Centre, Taiyuan 030024, PR China

autor

Wang Tao

• Taiyuan University of Technology, College of Mechanical and Vehicle Engineering, Taiyuan 030024, PR China
• Taiyuan University of Technology, Engineering Research Center of Advanced Metal Composites Forming Technology and Equipment, Ministry of Education, Taiyuan 030024, PR China
• Taiyuan University of Technology, TYUT-UOW Joint Research Centre, Taiyuan 030024, PR China

Bibliografia

• [1] Q.X. Huang, X.R. Yang, L.F. Ma, C.L. Zhou, G.M. Liu, H.B. Li, J. Iron Steel Res. Int. 21 (10), 931-937(2014).
• [2] S.C. Pan, M.N. Huang, G.Y. Tzou, S.W. Syu, J. Mater. Process. Technol. 177 (1-3), 114-120 (2006).
• [3] Y. Jing, Y. Qin, X. Zang, Y. Li, J. Mater. Process. Technol. 214 (8), 1686-1695 (2014).
• [4] S. Zhang, H. Xiao, H. Xie, L. Gu, J. Mater. Process. Technol. 214 (6), 1205-1210 (2014).
• [5] L. Li, K. Nagai, F. Yin, Sci. Technol. Adv. Mater. 9 (2), 23001 (2008).
• [6] B.X. Liu, S. Wang, W. Fang, F.X. Yin, C.X. Chen, Mater. Charact. 148, 17-25 (2019).
• [7] C.X. Chen, M.Y. Liu, B.X. Liu, F.X. Yin, Y.C. Dong, X. Zhang, F.Y. Zhang, Y.G. Zhang, Fusion Eng. Des. 125, 431-441 (2017).
• [8] B.X. Liu, S. Wang, W. Fang, J.L. Ma, F.X. Yin, J.N. He, J.H. Feng, C.X. Chen, Mater. Chem. Phys. 216, 460-467 (2018).
• [9] B.X. Liu, F.X. Yin, X.L. Dai, J.N. He, W. Fang, C.X. Chen, Y.C. Dong, Mater. Sci. Eng. A. 679, 172-182 (2017).
• [10] B.X. Liu, S. Wang, C.X. Chen, W. Fang, J.H. Feng, X. Zhang, F.X. Yin, Appl. Surf. Sci. 463, 121-131 (2019).
• [11] Z. Dhib, N. Guermazi, M. Gaspérini, N. Haddar, Mater. Sci. Eng. A. 656, 130-141 (2016).
• [12] Y. Chino, X. Huang, K. Suzuki, K. Sassa, M. Mabuchi, Mater. Sci. Eng. A. 528 (2), 566-572 (2010).
• [13] J. Singh, M.S. Kim, S.E. Lee, E.Y. Kim, J.H. Kang, J.H. Park, J.J. Kim, S.H. Choi, Mater. Sci. Eng. A. 729, 370-384 (2018).
• [14] M.X. Guo, J. Zhu, Y. Zhang, G.J. Li, T. Lin, J.S. Zhang, L.Z. Zhuang, Mater. Charact. 132, 248-259 (2017).
• [15] D. Ghaffari Tari, M.J. Worswick, S. Winkler, J. Mater. Process. Technol. 213 (8), 1337-1347 (2013).
• [16] F.K. Chen, K.H. Chiu, J. Mater. Process. Technol. 170 (1), 181-186 (2005).
• [17] M. Torkar, F. Tehovnik, B. Podgornik, Eng. Fail. Anal. 40, 1-7 (2014).
• [18] R. Padmanabhan, M.C. Oliveira, J.L. Alves, L.F. Menezes, Finite Elem. Anal. Des. 43 (14), 1062-1067 (2007).
• [19] J. Lade, B.N. Banoth, A.K. Gupta, S.K. Singh, J. Iron Steel Res. Int. 21 (12), 1147-1151 (2014).
• [20] F. Ernst, Y. Cao, G.M. Michal, A.H. Heuer, Acta Mater. 55 (6), 1895-1906 (2007).
• [21] M. Matula, L. Hyspecka, M. Svoboda, V. Vodarek, C. Dagbert, J. Galland, Z. Stonawska, L. Tuma, Mater. Charact. 46 (2), 203-210 (2001).
• [22] J. Park, J.S. Kim, M. Kang, S.S. Sohn, W.T. Cho, H.S. Kim, S. Lee, Sci. Rep. 7, 40231 (2017).
• [23] M. Jung, W. Cho, J. Park, J.G. Jung, Y.K. Lee, Mater. Charact. 94, 161-169 (2014).
• [24] N.V. Rao, D.S. Sarma, S. Nagarjuna, G.M. Reddy, Met. Sci. J. 25 (11), 1387-1396 (2009).
• [25] B. Hwang, H.S. Lee, Y.G. Kim, S. Lee, Mater. Sci. Eng. A. 402 (1), 177-187 (2005).
• [26] Y. Sidor, F. Kovac, T. Kvackaj, Acta Mater. 55 (5), 1711-1722 (2007).
• [27] H. Pommier, E.P. Busso, T.F. Morgeneyer, A. Pineau, Acta Mater. 103, 893-908 (2016).
• [28] K.J. Kim, J. Ginsztler, S.W. Nam, Mater. Lett. 59 (11), 1439-1443 (2005).
• [29] Y.F. Shen, X.X. Li, X. Sun, Y.D. Wang, L. Zuo, Mater. Sci. Eng. A. 552, 514-522 (2012).
• [30] H. Zhang, G. Huang, J. Fan, H. Jørgen Roven, F. Pan, B. Xu, Mater. Sci. Eng. A. 608, 234-241 (2014)

Uwagi

1. This work was supported by the National Key R & D program: high-quality metal composite plate efficient preparation principle and technical basis (2018YFA0707300), the Major Program of National Natural Science Foundation of China (U1710254), Youth Science Foundation Project of National Natural Science Foundation of China (51905372) and General Program of National Natural Science Foundation of China (51975398, 51974196).

2. Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).