Surface texture analysis of the X5CrNi18-10 steel after cutting with abrasive water jet and photon beam (laser)

• Autorzy: Romanowski Marcin , Nadolny Krzysztof

Identyfikatory

DOI

10.30464/jmee.2020.4.4.365

• Języki publikacji: EN

Abstrakty

EN

The article presents an analysis of the geometric structure of the surface of X5CrNi18-10 steel sheet after cutting with a abrasive water-jet (AWJ) and a photon beam (laser). Both methods and the workpiece material were also described. Using the laser triangulation method, the cut surface texture was measured by opto-digital microscopy. Additionally, microscopic images of the cut surface were made using the Dino-Lite Edge AM7915MZT microscope by ANMO Electronics Co. The analysis of changes in the value of the Sa parameter for the surface after laser cutting and abrasive water-jet showed that the thickness of the cut material has the most significant influence on the obtained measurement results.

Słowa kluczowe

EN

cutting; abrasive water jet; laser cutting; surface quality; X5CrNi18-10 steel

PL

cięcie; cięcie hydroabrazywne; cięcie laserowe; jakość powierzchni; stal X5CrNi18-10

• Wydawca: Wydawnictwo Uczelniane Politechniki Koszalińskiej
• Czasopismo: Journal of Mechanical and Energy Engineering
• Rocznik: 2020
• Tom: Vol. 4, No 4
• Strony: 365--374
• Opis fizyczny: Bibliogr. 14 poz., rys., tab.

Twórcy

autor

Romanowski Marcin

• Faculty of Mechanical Engineering, Department of Production Engineering, Koszalin University of Technology, Racławicka 15-17, 75-620 Koszalin, Poland

autor

Nadolny Krzysztof

• Faculty of Mechanical Engineering, Department of Production Engineering, Koszalin University of Technology, Poland

Bibliografia

• 1. Borkowski P., Fundamentals of surface treatment with highpressure abrasive-water jet. In book. Lee C.-I., Jeon S., Song J.-J. (Eds): 7th Pacific Rim International Conference on Water Jet Technology, Publ. CIR Communication, Seul, Korea (2003), pp. 321-330
• 2. Borkowski J., Benkowska M.: Influence of the main parameters of high-pressure abrasive water-jet treatment on the quality of the cut surface. ATMiA, Vol. 26, No. 2, 2006, pp. 11-18. (in Polish)
• 3. Brytan Z., 2009, Welding, corrosion, properties – introduction to stainless steels. Materials Seminar, Poznan. (in Polish)
• 4. Dobaj E.: Welding machines and equipment. Wydawnictwa Naukowo-Techniczne, Warsaw 1998. (in Polish)
• 5. Feldshtein E., Koman I.: Laser cutting of thicker elements in stainless steel sheets. Przegląd Mechaniczny, 4/2010, pp. 13-18. (in Polsh)
• 6. Klimpel A.: Welding and cutting of metals. Technologies. Wydawnictwa Naukowo-Techniczne, Warsaw 1999. (in Polish)
• 7. Mazurkiewicz A.: Special technologies of material shaping. Radom University of Technology, Radom 2009. (in Polish)
• 8. Słania J., Milewski P.: Comparison of laser cutting with water-jet cutting. Przegląd Spawalnictwa, 7/2014, pp. 30-40. (in Polish)
• 9. Sobczak R., Praźmo J.:Criteria for selection and properties of selected abrasives used in blasting. Article posted on 30.10.2012 at waterjet.org.pl. (in Polish)
• 10. Sobczak R., Praźmo J.: The basics of cutting with a high-pressure abrasive water-jet. Article posted on 8.12.2013 on waterjet.org.pl portal. (in Polish)
• 11. Zheng H.Y., Han Z.Z., Chen Z.D., Chen W.L., Yeo S.:Quality and Cost Comparisons between Laser and Waterjet Cutting. Journal of Material Processing Technology, 1996, pp. 62, 294-298.
• 12. https://bth.pl/uslugi/ciecie-woda-stali-wycinanie-strumieniem-wody/ (July, 2020)
• 13. https://bth.pl/uslugi/ciecie-laserem-wycinanie-laserowe-stali-blach/ (July, 2020)
• 14. https://www.kmt-waterjet.pl/ciecie-metalu-kmt_01.aspx (June, 2020)

Uwagi

PL

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).