Tytuł artykułu
Treść / Zawartość
Pełne teksty:
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
The current study focuses on the performance of a solar greenhouse dryer for drying of potato chips in Solar Dryer and Open sun conditions in Western Maharashtra. Potato chips is a value added product that can be effectively used during throughout the year as snacks, a side dish or an appetizer. It can be either deep dried or backed for consumption. The dried potato contains a high fiber content and it helps to lower the cholesterol level in blood reducing the risk of blood pressure if consumed backed. Potato chips can effectively be stored for one year to six months and consumed as snacks. The experiment was conducted for drying of potato chips in Solar Greenhouse Dryer and open sun conditions on 1st of April 2021 for 6 hours. The initial weight of the potato chips to be dried was 500 grams both for the solar greenhouse dryer and open sun drying conditions. The experiment was conducted at Bahe, Borgaon, Tal-Walwa, Dist-Sangli, Maharashtra, India located at 17.115°N and 74.33°E. The experimental observations collected during the tests were set as input data for the Design of the Experiments (DoE) i.e., for Response Surface Modelling (RSM). The main aim of using DoE i.e., Response Surface Modelling, is to obtain an optimum region for drying of potato chips in the Solar Greenhouse Dryer, from the surface plot; the region of maxima and minima was obtained. The contour plot obtained during modeling resembles the optimum region of drying; the optimum region for drying of potato chips is 47 to 50°C respectively. The Moisture Removal Rate (MRR) for drying of potato chips in the Solar Greenhouse Dryer and Open sun drying is 83% and 78% respectively. The drying rate observed during the experiment has a better resemblance with simulated Response Surface Modelling.
Czasopismo
Rocznik
Tom
Strony
91--97
Opis fizyczny
Bibliogr. 16 poz., rys., tab., wykr.
Twórcy
autor
- Department of Technology, Shivaji University, Kolhapur, Maharashtra State, India
autor
- Department of Technology, Shivaji University, Kolhapur, Maharashtra State, India
autor
- Department of Technology, Shivaji University, Kolhapur, Maharashtra State, India
Bibliografia
- 1. S. Vijayan, T. V. Arjunan, Anil Kumar. Fundamentals of Drying. Solar Drying Technology-Concept, Design, Testing and Modeling, Economics and Environment 2017; 3-38.
- 2. Ketki Deshmane S, Yadav AA, Ingawale SM. Wind data Estimation of Kolhapur district using Improved Hybrid Optimization by Genetic Algorithms (iHOGA) and NASA Prediction of Worldwide Energy Resources (NASA Power). International Research Journal of Engineering and Technology 2020; 2530–2538.
- 3. Labuza TP, McNally L, GallagherD, Hawkes J, Hurtado F. Stability of intermediate moisture foods. Lipid oxidation. Journal of Food Science 1972; 37(1); 154–159.
- 4. Yadav AA, Deshmane KS. Design Optimization and Simulation of a Solar grid connected photovoltaic system for a residential house in west central Maharashtra. Journal of Science and Technology 2021; 6(2); 79-86.
- 5. Prakash O, Kumar A. Annual performance of modified greenhouse dryer under passive mode in no-load conditions. International Journal of Green Energy 2015; 12; 1091–1099.
- 6. Aditya Arvind Yadav, Akshay Vijay Yadav, Jaydeep S Bagi, Pravin A Prabhu. Design of a Solar Modified Greenhouse Prototype. Journal of Science and Technology; 2021; 06(01); 118-125.
- 7. Rintu Kumar, Vishal Gupta, Rajiv Varshney. Numerical Simulation of Solar Greenhouse Dryer Using Computational Fluid Dynamics. International Journal of Research and Scientific Innovation 2017; 111-115.
- 8. Yadav AA, Prabhu PA, Bagi JS. Numerical simulation and experimental validation of solar greenhouse dryer using finite element analysis for different roof shapes. Journal of Mechanical and Energy Engineering 2021; 5(1); 69-80.
- 9. Zh. S. Akhatov, A. S. Khalimov. Numerical Calculations of Heat Engineering Parameters of a Solar Greenhouse Dryer. Applied Solar Energy 2015; 51(2); 26-30.
- 10. Yadav AA, Prabhu PA, Bagi JS. Response Surface Modelling and performance evaluation of solar dryer for drying of grapes. Journal of Mechanical and Energy Engineering 2021; 5(2); 157-168.
- 11. Vivekanandan M, Periasamy K, Babu CD, Selvakumar G, Arivazhagan R. Experimental and CFD investigation of six shapes of solar greenhouse dryer in no-load conditions to identify the ideal shape of dryer. Materials Today: Proceedings. 2020; 1-8.
- 12. Yadav AA, Prabhu PA, Bagi JS. Experimental Performance and Response Surface Modelling of Solar dryer for drying of bitter gourd in western Maharashtra, India. Journal of Post-Harvest Technology. 2021; 9(3); 1-16.
- 13. Prakash O, Kumar A, Laguri V. Performance of modified greenhouse dryer with thermal Energy storage. Energy Reports 2016; 2; 155 –162.
- 14. Kumar A, Tiwari GN. Effect of mass on convective mass transfer coefficient during open sun and greenhouse drying of onion flakes. Journal of Food Engineering 2007; 79; 1337–1350.
- 15. Ingawale SM, Yadav AA, Prabhu PA. Energy Consumption assessment of grain drying industry in India. International Journal of Engineering Research and Applications 2020; 10(12); 22-28.
- 16. Vishal Gupta, Bhagyashri Dhurve, Abhishek Sharma. Experiment analysis on modified greenhouse dryer in no-load conditions. International Journal of Engineering Technology Research & Management 2017; 2(4); 100-105.
Uwagi
PL
Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-fddf34e4-8cef-4f1d-8bf9-f58569d48b6d