The use of combined quality management instruments to analyze the causes of non-conformities in the castings of the cover of the rail vehicle bearing housing

• Autorzy: Czerwińska Karolina , Piwowarczyk Adam

Identyfikatory

DOI

10.30657/pea.2022.28.36

• Języki publikacji: EN

Abstrakty

EN

The most critical activities influencing the success of each company are continuous improvement of the quality of manufactured products and monitoring of the production process. Skillful use of available technologies and quality management tools allows for eliminating casting non-conformities and preventing their repetition in the future. The research aimed to analyze the types of defects occurring in castings, the location of their most frequent occurrence areas, and to identify the causes of defects in castings of bearing housings used in rail vehicles. The benefits of a combination of quality management tools for diagnosing material discontinuities in the analyzed castings are presented in this article.

Słowa kluczowe

EN

quality control; quality management tools; Pareto-Lorentz diagram; casting defects

PL

kontrola jakości; narzędzia zarządzania jakością; diagram Pareto-Lorentza; wady odlewów

• Wydawca: Oficyna Wydawnicza Stowarzyszenia Menedżerów Jakości i Produkcji
• Czasopismo: Production Engineering Archives
• Rocznik: 2022
• Tom: Vol. 28, Iss. 3
• Strony: 289--294
• Opis fizyczny: Bibliogr. 56 poz., rys., tab.

Twórcy

autor

Czerwińska Karolina

• Rzeszow University of Technology, Faculty of Mechanical Engineering and Aeronautics, 35-959 Rzeszów, al. Powstańców Warszawy 8, Poland

autor

Piwowarczyk Adam

• Cracow University of Technology, Faculty of Mechanical Engineering, 31-864 Kraków, al. Jana Pawła II 37, Poland

Bibliografia

• 1. Bielski, A., 2021. Mixing effects in the river downstream from pollution discharge point. Technical Transactions 118, art. e2021004, DOI: 10.37705/TechTrans/e2021004
• 2. Birol, Y., 2010. Effect of solution heat treatment on the age hardening capacity of dendritic and globular AlSi7Mg0.6 alloys. International Journal of Materials Research 101, 439-444, DOI: 10.3139/146.110293
• 3. Brungs, D., 1997. Light weight design with light metal castings. Materials and Design 18, 285-291, DOI: 10.1016/s0261-3069(97)00065-4
• 4. Cavaliere, P., Cerri, E., Leo, P., 2004. Effect of heat treatments on mechanical properties and fracture behavior of a thixocast A356 aluminum alloy. Journal of Materials Science, 39, 1653-1658, DOI: 10.1023/B:JMSC. 0000016165.99666.dd
• 5. Czyczuła, W., Rochel, M., 2021. Operational problems of tramway infrastructure in sharp curves. Technical Transactions, 118, e2021015, DOI: 10.37705/TechTrans/e2021015
• 6. Danielewski, H., Skrzypczyk, A., Zowczak, W., Gontarski, D., Płonecki, L., Wiśniewski, H., Soboń, D., Kalinowski, A., Bracha, G., Borkowski, K., 2021. Numerical analysis of laser-welded flange pipe joints in lap and fillet configurations. Technical Transactions, 118, e2021030, DOI: 10.37705/TechTrans/e2021030
• 7. Falęcki, Z., 1997. Analiza wad odlewów. AGH, Kraków.
• 8. Hurtalová, L., Tillová, E., Chalupová, M., 2013. The structure analysis of secondary (Recycled) AlSi9Cu3 cast alloy with and without heat treatment. Engineering Transactions 61, 197-218.
• 9. Hurtalová, L., Belan, J., Tillová, E. Chalupová, M. 2011. Changes in Structural Characteristics of Hypoeutectic Al-Si Cast Alloy after Age Hardening. Materials Science, 18, 228-233, DOI: 10.5755/j01.ms.18.3.2430
• 10. Julis, M., Pospisilova, S., Zapletal, J., Podrabsky, T., 2011. Study of micro-structure and mechanical properties of aluminum alloy AlSi7Mg0.6 after different cooling methods. Chemicke Listy, 105, 812-813.
• 11. Kalinowski, A., Radek, N., Broncek, J., 2021. Safety of operation and maintenance activities of rolling stocks by the example of electric multiple units EN96. Communications - Scientific Letters of the University of Žilina, 23, F11-F19, DOI: 10.26552/COM.C.2021.1.F11-F19
• 12. Korzekwa, J., Gądek-Moszczak, A., Zubko, M., 2018. Influence of the Size of Nanoparticles on the Microstructure of Oxide Coatings. Materials Science, 53, 709-716, DOI: 10.1007/s11003-018-0127-x
• 13. Kozakowski, S., 2001. Badanie odlewów - technologie odlewnicze, typowe dla nich wady i metody ich ujawniania. Biuro Gamma, Warszawa.
• 14. Kubecki, A., Śliwiński, C., Śliwiński, J., Lubach, I., Bogdan, L., Maliszewski, W., 2021. Assessment of the technical condition of mines with mechanical fuses. Technical Transactions 118, e2021025, DOI: 10.37705/Tech-Trans/e2021025
• 15. Kurp, P., Danielewski, H., 2022. Metal expansion joints manufacturing by a mechanically assisted laser forming hybrid method – concept. Technical Transactions, 119, e2022008, DOI: 10.37705/TechTrans/e2022008
• 16. Lipiński, T., 2017. Roughness of 1.0721 steel after corrosion tests in 20% NaCl. Production Engineering Archives, 15, 27-30, DOI: 10.30657/pea. 2017.15.07
• 17. Lipiński, T., Wach, A., 2014. Influence of outside furnace treatment on purity medium carbon steel. 23rd International Conference on Metallurgy and Materials, Ostrava, Tanger, 738-743.
• 18. Łuszczak, M., Dańko, R., 2013. Stan zagadnienia w zakresie odlewania du-żych odlewów strukturalnych ze stopów aluminium. Archives of Foundry Engineering, 13, 113-116.
• 19. Łybacki, W., Zawadzka, K., 2008. Wspomaganie diagnostyki wad odlewniczych narzędziami zarzadzania jakością. Archiwum Technologii Maszyn i Automatyzacji, 28, 89-101.
• 20. Marković, S., Arsić, D., Nikolić, R., Lazić, V., Hadzima, B., Milovanović, V., Dwornicka, R., Ulewicz, R., 2021. Exploitation characteristics of teeth flanks of gears regenerated by three hard-facing procedures. Materials 14, 4203, DOI: 10.3390/ma14154203834814534361396
• 21. Morawski, M., Talarczyk, T., Malec, M., 2021. Depth control for biomimetic and hybrid unmanned underwater vehicles. Technical Transactions 118, e2021024, DOI: 10.37705/TechTrans/e2021024
• 22. Mueller, M.G., Fornabaio, M., Zagar, G., Mortensen, A., 2016. Microscopic strength of silicon particles in an aluminium-silicon alloy. Acta Materialia, 105, 165-175, DOI: 10.1016/j.actamat.2015.12.006
• 23. Naik, A., 2021. HMM-based phoneme speech recognition system for the control and command of industrial robots. Technical Transactions, 118, e2021002, DOI: 10.37705/TechTrans/e2021002
• 24. Ostasz, G., Czerwińska, K., Pacana, A., 2020. Quality management of aluminum pistons with the use of quality control points. Management Systems In Production Engineering, 28, 29-33, DOI: 10.2478/mspe-2020-0005
• 25. Pacana, A., Bednarova, L., Pacana, J., Liberko, I., Wozny, A., Malindzak, D., 2014. Effect of selected factors of the production process of stretch film for its resistance to puncture. Przemysl Chemiczny, 93, 2263-2264.
• 26. Pacana, A., Czerwińska, K., Bednarova, L., 2018. Discrepancies analysis of casts of diesel engine piston. Metalurgija, 57, 324-326.
• 27. Pacana, A., Czerwińska, K., Bednarova, L., 2019. Comprehensive improvement of the surface quality of the diesel engine piston. Metalurgija, 58, 329-332.
• 28. Pacana, A., Pasternak-Malicka, M., Zawada, M., 2016. Decision support in the production of packaging films by cost-quality analysis. Przemysł Chemiczny, 95, 1042-1044, DOI: 10.15199/62.2016.5.31
• 29. Pacana, A., Siwiec, D., Bednárová, L., 2019. Analysis of the incompatibility of the product with fluorescent method. Metalurgija, 58, 337-340.
• 30. Pezda, J., 2017. Zastosowanie metody ATND do oceny właściwości mechanicznych okołoeutektycznego stopu AlSi12Cu2(Fe). Inżynieria Maszyn, 22, 47-57.Search in Google Scholar
• 31. Pliszka, I., Radek, N., 2017. Corrosion Resistance of WC-Cu Coatings Produced by Electrospark Deposition. Procedia Engineering, 192, 707-712, DOI: 10.1016/j.proeng.2017.06.122
• 32. PN-EN 1706:2011 (2011). Aluminum and aluminum alloys castings. Chemical composition and mechanical properties, PKN, Warszawa.
• 33. Pietraszek, J., Dwornicka, R., Szczotok, A., 2016. The bootstrap approach to the statistical significance of parameters in the fixed effects model. ECCOMAS 2016 – Proc. 7th European Congress on Computational Methods in Applied Sciences and Engineering, 3, 6061-6068, DOI: 10.7712/100016.2240.9206
• 34. Pietraszek, J., Gądek-Moszczak, A., Radek, N., 2014. The estimation of accuracy for the neural network approximation in the case of sintered metal properties. Studies in Computational Intelligence, 513, 125-134, DOI: 10.1007/978-3-319-01787-7_12
• 35. Poloczek, Ł., Kiełbus, A., 2016. Wpływ czynników technologicznych na jakość odlewów ze stopów aluminium. Zarządzanie Przedsiębiorstwem, 19, 14-19.
• 36. Pysz, S., Maj, M., Czekaj, E., 2014. High-Strength Aluminium Alloys and Their Use in Foundry Industry of Nickel Superalloys. Archives of Foundry Engineering, 14, 71-76.10.2478/afe-2014-0065
• 37. Radek, N., 2009. Determining the operational properties of steel beaters after electrospark deposition. Eksploatacja i Niezawodność, 44, 10-16.
• 38. Radek, N., Dwornicka, R., 2020. Fire properties of intumescent coating systems for the rolling stock. Communications - Scientific Letters of the University of Žilina, 22, 90-96, DOI: 10.26552/com.C.2020.4.90-96
• 39. Radzajewski, P., 2021. Calculation of brake-force distribution on three-axle agricultural trailers using simulation methods. Technical Transactions 118, e2021029, DOI: 10.37705/TechTrans/e2021029
• 40. Radzymińska-Lenarcik, E., Ulewicz, R., Ulewicz, M., 2018. Zinc recovery from model and waste solutions using polymer inclusion membranes (PIMs) with 1-octyl-4-methylimidazole. Desalination and Water Treatment, 102, 211-219, DOI: 10.5004/dwt.2018.21826
• 41. Regulski, P., Abramek, K., 2022. The application of neural networks for the life-cycle analysis of road and rail rolling stock during the operational phase. Technical Transactions, 119,. e2022002, DOI: 10.37705/Tech-Trans/e2022002
• 42. Salomon, A., Voigt, C., Fabrichnaya, O., Aneziris, C.G., Rafaja, D., 2017. Formation of Corundum, Magnesium Titanate, and Titanium(III) Oxide at the Interface between Rutile and Molten Al or AlSi7Mg0.6 Alloy. Advanced Engineering Materials, 19, 1700106, DOI: 10.1002/adem. 201700106
• 43. Sawicki, T., 2021. Improved rack and pinion drive. Technical Transactions 118, e2021013, DOI: 10.37705/TechTrans/e2021013
• 44. Siwiec, D., Bednarova, L., Pacana., A., Zawada, M., Rusko, M. 2019. Decision support in the selection of fluorescent penetrants for industrial nondestructive testing. Przemysł Chemiczny, 98, 1594-1596, DOI: 10.15199/62.2019.10.12
• 45. Słowiński, K., Piekarczyk, M., Król, M., 2021. Verification of the cylindrical tank shell stability using the stress design and the MNA-LBA procedure. Technical Transactions, 118, e2021021, DOI: 10.37705/Tech-Trans/e2021021
• 46. Szczotok, A., Pietraszek, J., Radek, N., 2017. Metallographic Study and Repeatability Analysis of γ’ Phase Precipitates in Cored, Thin-Walled Castings Made from IN713C Superalloy. Archives of Metallurgy and Materials, 62, 595-601, DOI: 10.1515/amm-2017-0088
• 47. Szczotok, A., Roskosz, S., 2005. New possibilities of light microscopy research resulting from digital recording of images. Materials Science-Poland, 23, 559-565.
• 48. Thoni Alutec Sp. z o.o., 2021. Unpublished materials. Stalowa Wola.
• 49. Traneva, V., Atanassova, V., Tranev, S., 2019a. Index matrices as a decision-making tool for job appointment. Lecture Notes in Computer Science 11189, 158-166, DOI: 10.1007/978-3-030-10692-8_18
• 50. Traneva, V., Tranev, S., Szmidt, E., Atanssov, K., 2018. Three dimensional intercriteria analysis over intuitionistic fuzzy data. Advances in Intelligent Systems and Computing, 643, 442-449, DOI: 10.1007/978-3-319-66827-7_40
• 51. Traneva, V., Tranev, S., 2019b. An interval-valued intuitionistic fuzzy approach to the assignment problem. Advances in Intelligent Systems and Computing, 1029, 1279-1287, DOI: 10.1007/978-3-030-23756-1_150
• 52. Tybulczuk, J., Seredyński, J.,Szanda, M., 2006. Zarządzanie jakością w procesie produkcyjnym odlewów ze stopów Al-Si o specyficznych wymaganiach mechanicznych w „INNOWACJA” Sp. z o.o. w Nowej Dębie. Archiwum Odlewnictwa, 6, 18(1), 53-58.
• 53. Ulewicz, M., Lesińska, U., Bocheńska, M., 2010. Transport of lead across polymer inclusion membrane with p-tert -butylcalix[4]arene derivative. Physicochemical Problems of Mineral Processing, 44, 245-256.
• 54. Wójcicka, K., 2021. The efficiency of municipal sewage treatment plants inspiration for water recovery. Technical Transactions, 118, e2021023, DOI: 10.37705/TechTrans/e2021023
• 55. Wysoczański, A., Kamyk, Z., Yvinec, Y., 2021. Analysis of the possibility of employing 3D printing technology in crisis situations. Technical Transactionsm 118, e2021008, DOI: 10.37705/TechTrans/e2021008
• 56. Yang, Q., Xia, C., Deng, Y., Li, X., Wang, H., 2019. Microstructure and Mechanical Properties of AlSi7Mg0.6 Aluminum Alloy Fabricated by Wire and Arc Additive Manufacturing Based on Cold Metal Transfer (WAAM-CMT). Materials 12, 2525, DOI: 10.3390/ma12162525671923231398869

Uwagi

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).