Comparing the tribological resistance of the tool steel C90 and HS 6-5-2 remelted with the electric arc

• Autorzy: Adamiak S. , Dziedzic A.
• Języki publikacji: EN

Abstrakty

EN

There have been the results of the tribological research presented of the tool, non-alloy steel C90 and high speed steel HS 6-5-2. The comparison has been presented due to the similar content of the carbon in both steels. The tribological research were conducted in the conditions of the technically dry friction on a testing machine of the type pin on disc T-01M. The tribological research showed the similar intensity of tribological wear of the steel C90 and HS 6-5-2 remelted with the electric arc. During the friction there was the abrasion and adhesive wear.

Słowa kluczowe

EN

tool steel; surface layer remelting; tribological wear; GTAW method

PL

stal narzędziowa; przetapianie warstwy wierzchniej; zużycie tribologiczne; metoda GTAW

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2010
• Tom: Vol. 10, iss. 1 spec.
• Strony: 291--294
• Opis fizyczny: Bibliogr. 7 poz., rys., wykr.

Twórcy

autor

Adamiak S.

• Institute of Technics, Rzeszow University, Rejtana 16 B, 35-310 Rzeszow, Poland

autor

Dziedzic A.

• Institute of Technics, Rzeszow University, Rejtana 16 B, 35-310 Rzeszow, Poland

Bibliografia

• [1] A.W. Orłowicz, A. Trytek, Effect of rapid solidification on sliding wear of iron castings, Wear 9258, 2002.
• [2] Z. Nitkiewicz, J. Iwaszko, The use of arc plasma in surface engineering. Material engineering, 6, 373-375, 2000, (in Polish).
• [3] A.W. Orłowicz, M. Mróz, Thermal coefficients of the GTAW method. Archives of Foundry, Year 2003, no 3, 2003, (in Polish).
• [4] Y. Adonyj, R.W. Richardson, W.A. Beaslack, Investigation of arc force effects in surface GTAW welding. Welding Journal, 9, 35-44, 1996.
• [5] Z. Opiekun, A. Trytek, The influence of plasma-generating gas on the quantity of heat taken by surface layer partially remelted casts of the MAR-M509 alloy, Archives of Foundry, Year 2006, no 18(1/2), 401-406, 2006, (in Polish).
• [6] W. Orłowicz, M, Mróz, A. Trytek, Heating efficiency in the GTAW process. Acta Metallurgica Slovaca, No 2, 539-543, 1999.
• [7] Burakowski Wierzchoń, Surface Engineering, PWN, Warsaw, 1995 (in Polish).