PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Electromagnetic compatibility testing of electromagnetic measurement system

Treść / Zawartość
Identyfikatory
Warianty tytułu
PL
Badanie kompatybilności elektromagnetycznej układu pomiarowego elektromagnetycznego
Języki publikacji
EN
Abstrakty
EN
The paper presents the results of experimental studies of the emission of electromagnetic interference radiated by the prototype of the measuring system of the electric component of the electromagnetic field and its immunity to electromagnetic interference. The experimental studies were carried out in the GTEM 1000 chamber. The obtained results were compared with the EN 55014 standard, which specifies the requirements for electromagnetic compatibility. It has been demonstrated that the proposed prototype measuring system meets the standard requirements.
PL
W artykule przedstawiono wyniki badań eksperymentalnych emisji zakłóceń elektromagnetycznych emitowanych przez prototypowy układ pomiarowy składowej elektrycznej pola elektromagnetycznego oraz jego odporności na zakłócenia elektromagnetyczne. Badania eksperymentalne przeprowadzono w komorze GTEM 1000. Uzyskane wyniki porównano z normą EN 55014, która określa wymagania dotyczące kompatybilności elektromagnetycznej. Wykazano, że proponowany prototyp układu pomiarowego spełnia wymagania normy.
Rocznik
Strony
70--73
Opis fizyczny
Bibliogr. 16 poz., rys.
Twórcy
  • Department of Electrical Engineering and Superconductivity Technologies, Faculty of Electrical Engineering and Computer Science, Lublin University of Technology, Lublin, Nadbystrzycka 38A, 20-618 Lublin
  • The University College of Applied Science in Chelm, The Institute of Technical Sciences and Aviation
  • Lublin University of Technology, Lublin, Nadbystrzycka 38, 20-618 Lublin
autor
  • Department of Measuring-Information Technologies, Lviv Polytechnic National University, Lviv, Bandera Str. 12, 79013 Lviv, Ukraine
Bibliografia
  • [1] Sharafat, A., Tyrel, G., Baden, P., Johan, P., Fakhrul, A. (2021). Low Cost Sensor With IoT LoRaWAN Connectivity and Machine Learning-Based Calibration for Air Pollution Monitoring. IEEE Transactions on Instrumentation and Measurement, 70 (17). https://doi.org/10.1109/TIM.2020.3034109
  • [2] Walczak, M., Bychto, L., Kraśniewski, J., Duer, S. (2022) Design and evaluation of a low-cost solar simulator and measurement system for low-power photovoltaic panels. Metrology and Measurement Systems, 29(4), 685-700. https://doi.org/10.24425/mms.2022.143067
  • [3] Irfan M., Ayub N., Althobiani F., Ali Z., Idrees M., Ullah S., Rahman S., Saeed Alwadie A., Ghonaim S.M., Abdushkour H., Alkahtani F.S., Alqhtani S., Gas P., Energy theft identification using AdaBoost Ensembler in the Smart Grids, CMCComputers, Materials & Continua, vol. 72, 2022, no. 1, pp. 2141 – 2158. DOI: 10.32604/cmc.2022.025466
  • [4] Gas P., Miaskowski A., Implant Safety Tool Application to Assist the Assessment of Radio-Frequency Radiation Exposure, Journal of Ecological Engineering, 2019, vol. 20, no. 10, 24 – 33. DOI: 10.12911/22998993/112745
  • [5] Jun, S., Kochan, O. V., & Jotsov, V. S., Methods of reducing the effect of the acquired thermoelectric inhomogeneity of thermocouples on temperature measurement error. Measurement Techniques, 58(3) 92015), 327-331.
  • [6] Leleń M., Biruk-Urban K., Jozwik J., Tomilo P., Modeling and Machine Learning of Vibration Amplitude and Surface Roughness after Waterjet Cutting, Materials,(2023), 16 (19), doi.10.3390/ma16196474
  • [7] Pytka J.,Józwik J.,Budzyński P., Łyszczyk T.,Tofil A., Gnapowski E., Laskowski J.,Wheel dynamometer system for aircraft landing gear testing, Measurement, 148 (2019), DOI 10.1016/j.measurement.2019.106918
  • [8] Pytka J., Budzyński P., Tomiło P., Michałowska J., Błażejcza, D., Gnapowsk E., Pytka, J., Gierczak, K., Measurement of aircraft ground roll distance during takeoff and landing on a grass runway, Measurement, (2022), 10.1016/j.measurement.2022.111130
  • [9] Michalowska J., Jóźwik J., Mika D., Krawczyk A., Exposure to Electromagnetic Fields in the Surrounding Area of Microtomograph for the Frequency of 50 Hz,. IEEE EUROCON -17th International Conference on Smart Technologies, (2017), 555-557
  • [10] Mazurek P., Michalowska J., Koziel J. Gad R., Wdowiak A., The intensity of the electromagnetic fields in the coverage of GSM 900, GSM 1800 DECT, UMTS, WLAN in built-up areas, 2 Applications of Electromagnetics in Modern Techniques and Medicine, PTZE 2018, (2018), 159 – 162, DOI 10.1109/PTZE.2018.8503156
  • [11] EN 61000-4-20:2022, Electromagnetic compatibility (EMC) – Part 4-20. Testing and measurement techniques – Emission and immunity testing in transverse electromagnetic (TEM) waveguides
  • [12] Michałowska J., Tomiło P., Measurement System of an Electromagneric Field for AIircrafts with the Use of Machine Learning Model, Metrology and Measurement System, (2024), doi: 10.24425/mms.2024.150289
  • [13] PN-EN 55014-1:2021, Electromagnetic compatibility – Requirements for household appliances, electric tools and similar apparatus – Part 1: Emission
  • [14] Michałowska J., Mazurek P., A study on radiated interference emitted by power tool appliances within 30 MHz to 1 GHz, Przegląd Elektrotechniczny, 96 (2020), nr 1, 178-181
  • [15] Goleman R., Majcher J., Bańka K., Electromagnetic compatibility of selected elements of building Automation, Przegląd Elektrotechniczny, R. 99 NR 5/2023
  • [16] PN-EN 55014-2:2021, Electromagnetic compatibility – Electromagnetic compatibility - Requirements for household appliances, electric tools and similar devices - Part 2: Immunit
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-fd350112-db05-4fed-a6c8-330b857a26f0
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.