PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Emission and trends in reclaiming waste heat in industrial instalations

Autorzy
Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The article presents the analysis of waste heat emission in a typical industrial installation. On the basis of the process monitoring system, periodic analyses of fumes composition, installation process manual and the conducted measurements of the heat fluxes from individual sources emitting heat on the way of natural convection from the devices’ coats and forced convection in the fumes flux were calculated. According to the authors the heat of temperature 140–155 °C and surface power density 860–970 W/m2 emitted by devices’ covers can be reclaimed in ORC techniques, Peltier’s modules and the systems realising Stirling cycle. Part of the waste heat included in fumes, which makes c.a. 76% of the total emission from the installation, should be returned to the process of fuel oxidation, what will reduce the emission by c.a. 18% and the volume of consumed fuel by c.a. 25 m3 CH4/h, according to the presented calculations.
Rocznik
Strony
26--30
Opis fizyczny
Bibliogr. 5 poz., tab., rys.
Twórcy
autor
  • Instytute of Transportation, Combustion Engines and Ecology, Lublin University of Technology, Nadbystrzycka 36, 20-618 Lublin, Poland
autor
  • Postgraduate student of Lublin University of Technology
Bibliografia
  • 1. Rattner A.S., Garimella S. 2011. Energy harvesting, reuse and upgrade to reduce primary energy usage in the USA. Energy, 36: 172-183.
  • 2. Schall D. Hirzel S. 2012. Thermal cooling using low-temperature waste heat: a cost-effective way for industrial companies to improve. Energy Efficiency, 5: 547-569.
  • 3. Wiak T. 2012. Koncepcja zagospodarowania ciepła odpadowego w instalacji konwersji metanu. Praca magisterska, Politechnika Lubelska.
  • 4. Wu Ch. 1999. Analysis of waste-heat thermoelectric power generators. Applied Thermal Engineering, 16(1): 63-69.
  • 5. Zhang H., Zhuang J. 2003. Research, development and industrial application of heat pipe technology in China. Applied Thermal Engineering, 23: 1067-1083.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-fcd3ea09-f670-4084-85cb-39f00b13660a
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.