The Development and Numerical Analysis of the Conical Radiator Extrusion Process

• Autorzy: Michalczyk J.

Identyfikatory

DOI

10.1515/amm-2017-0334

• Języki publikacji: EN

Abstrakty

EN

The article presents a newly developed method for single-operation extrusion of conical radiators. This is the author’s radiator manufacturing method being the subject of a patent application. The proposed method enables the manufacture of radiators either with or without an inner opening and with an integral plate. Selected results of numerical computations made within Forge®3D, a finite element method (FEM)-based software program, were presented during the analysis of the process. A comparative analysis of the proposed manufacturing method using the double-sided extrusion method was also made. The proposed manufacturing method is assumed to produce radiators in a single technological operation with the stock material being standardized 30 mm-diameter aluminium bars. The objective of the developed method is also to reduce the energy-force parameters.

Słowa kluczowe

EN

extrusion radiator; conical radiator

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2017
• Tom: Vol. 62, iss. 4
• Strony: 2267--2272
• Opis fizyczny: Bibliogr. 15 poz., rys., wzory

Twórcy

autor

Michalczyk J.

• Czestochowa University of Technology, Faculty of Production Engineering and Materials Technology, Institute of Plastic Working Processes and Safety Engineering, 19 Armii Krajowej Av., 42-200 Częstochowa, Poland

Bibliografia

• [1] A. Dziubińska, A. Gontarz: The Method of forming the heat sink. Polish Patent PL 219445.
• [2] J. Michalczyk, Method of producing a throughway sleeve. Polish Patent PL 221425.
• [3] J. Michalczyk, M. Suliga, The Method of producing the heat sink conical. Application Patent P416772.
• [4] V. V. Dewjatow, J. Michalczyk, J. Rajczyk, Teoretyczne podstawy i technologia procesów wyciskania. Częstochowa (2011).
• [5] W. Libura, Płynięcie metalu w procesie wyciskania. Kraków (2011).
• [6] J. Sińczak, Kucie dokładne, Kraków (2011).
• [7] V. V. Dewiatov, H. S. Dyja, V. Y. Stolbow, Modeling mathematical and optimization processes extrusions, Częstochowa 2004.
• [8] J. Piwnik, The Modeling processes plastic flow. Białystok (1992).
• [9] M. Pietrzyk, The numerical methods in plastic working metals. Kraków (1992).
• [10] M. Zahn, J. Mater. Process. Tech. 127, 401-408 (2002).
• [11] M. Kopernik, M. Pietrzyk, Arch. Metall. Mater. 52, 2 (2007).
• [12] J. L. Chenot, L. Fourment, T. Coupez, R. Ducloux, E. Wey, Forging and Related Technology, Birminghams, 113, (1998).
• [13] N. J. Hoff, Quart, Appl. Mech. 2, 49 (1954).
• [14] F. H. Norton, Creep of Steel at High Temperature. McGraw Hill, New York 1929.
• [15] H. Dyja, P. Szota, S. Mroz, J. Mater. Process. Tech. 153, 115-121 (2004

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).