Application of High Flow Rate Gas in the Process of Argon Blowing Trough Steel

• Autorzy: Merder T. , Pieprzyca J. , Warzecha M. , Warzecha P.

Identyfikatory

DOI

10.1515/amm-2017-0133

• Języki publikacji: EN

Abstrakty

EN

The article demonstrates results of modelling research tests concerning the analysis of possibilities of blowing gas into the metal bath at high flow rates in a steel ladle with a nominal capacity of 50 Mg. Various configurations concerning of gas introduction into the steel ladle were analysed. There were considered cases of blowing into the metal bath via one, two or three purging plugs, being installed on the bottom and via additional support for blowing the gas from the top through the lance. Results obtained from the water model of the reactor were verified with the results of numerical simulations.

Słowa kluczowe

EN

ladle; high intensity gas blowing; numerical modelling; physical modelling

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2017
• Tom: Vol. 62, iss. 2A
• Strony: 905--910
• Opis fizyczny: Bibliogr. 15 poz., rys., tab., wzory

Twórcy

autor

Merder T.

• Silesian University of Technology, Institute of Metals Technology, Krasinskiego 8, 40-019 Katowice, Poland

autor

Pieprzyca J.

• Silesian University of Technology, Institute of Metals Technology, Krasinskiego 8, 40-019 Katowice, Poland

autor

Warzecha M.

• Czestochowa University of Technology, Department of Metals Extraction and Recirculation, Al. Armii Krajowej 19, 42-201 Czestochowa, Poland

autor

Warzecha P.

• Czestochowa University of Technology, Department of Metals Extraction and Recirculation, Al. Armii Krajowej 19, 42-201 Czestochowa, Poland

Bibliografia

• [1] G. Stolte, Secondary metallurgy – fundamentals processes applications, 2002 Woodhead Publishing, Dusseldorf.
• [2] A. Ghosh, Secondary steelmaking; principles and application, 2000 CRC Press USA.
• [3] Technical Information, ZM “ROPCZYCE” S.A., 2015.
• [4] Technical Information, RHI AG, 2015.
• [5] Y. Pan, B. Björkman, J. of the Iron & Steel Inst. of Japan Inter. 41 (6), 614-623 (2002).
• [6] D. Guo, G.A. Irons, Metall. Mater. Trans. B 31B (10), 1447-1455 (2011).
• [7] B. Panic, Metalurgija 52 (2), 177-180 (2013).
• [8] T. Merder, J. Pieprzyca, M. Warzecha, Metalurgija 48 (3), 143-146 (2009).
• [9] M. Warzecha, J. Jowsa, T. Merder, Metalurgija 46 (4), 227-232 (2007).
• [10] K. Michalek, Vyuziti fysikalmiho a numerickeho modelowani pro optimalizaci metalurgickych procesu, 2001 Vysoka Skola Banska, Ostrawa.
• [11] L. Zhang, S. Yang, K. Cai, J. Li, X. Wan, B.G. Thomas, Metall. Mater. Trans. B 38B (1), 63-83 (2007).
• [12] H. Chanson, The Hydraulics of Open Channel Flow, 1999 Arnold UK, London.
• [13] C. E. Brennen, Fundamentals of Multiphase Flows, 2005 Cambridge University Press.
• [14] C. T. Crowe, J.D. Schwarzkopf, M. Sommerfeld, Y. Tsuji, Multiphase Flows with Droplets and Particles, Second Edition, 2011 CRC Press.
• [15] ANSYSFluent, User’s guide, version 14.5, Fluent Inc.

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017).