An analytical study on buckling behavior of CNT/polymer composite plates using the first order shear deformation theory

• Autorzy: Peyyala P. K. , Subba Rao V. V.

Identyfikatory

DOI

10.15632/jtam-pl.56.1.71

• Języki publikacji: EN

Abstrakty

EN

Most plates used in engineering structures such as aircraft wings, ship ducts and buildings, although quite capable of resisting tensile loads, are poor in withstanding compression. In order to avoid premature failure under compression, it is important to know buckling behavior of the plate. This article primarily deals with the analytical study of buckling behavior of a carbon nanotube reinforcing polymer composite plates based on the first order shear deformation theory by employing Mori-Tanaka micromechanics approach to obtain elastic properties. In this investigation, an attempt is made for evaluating the effect of plate thickness, CNT volume fraction, stacking sequence and CNT radii on the buckling of plates.

Słowa kluczowe

EN

buckling; carbon nanotube; composite plates; micromechanics; FSDT

• Wydawca: Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
• Czasopismo: Journal of Theoretical and Applied Mechanics
• Rocznik: 2018
• Tom: Vol. 56 nr 1
• Strony: 71--79
• Opis fizyczny: Bibliogr. 20 poz., rys., tab.

Twórcy

autor

Peyyala P. K.

• Jawaharlal Nehru Technological University Kakinada, India

autor

Subba Rao V. V.

• Jawaharlal Nehru Technological University Kakinada, India

Bibliografia

• 1. Arash B., Wang Q., 2013, Detection of gas atoms with carbon nanotubes, Scientific Reports, 3
• 2. Arash B., Wang Q., Varadan V., 2014, Mechanical properties of carbon nanotube/polymer composites, Scientific Reports, 4
• 3. Demczyk B.G., Wang Y.M., Cumings J., Hetman M., Han W., Zettl A., Ritchie R.O., 2002, Direct mechanical measurement of the tensile strength and elastic modulus of multiwalled carbon nanotubes, Material Science Engineering, A334, 173-178
• 4. Gates T., Odegard G., Frankland S., Clancy T. 2005, Computational materials: multiscale modeling and simulation of nanostructured materials, Composite Science Technology, 65, 15, 2416-2434
• 5. Iijima S., 1991, Helical microtubules of graphitic carbon, Nature, 354, 56-58
• 6. Lau K.-T., Hui D., 2002, The revolutionary creation of new advanced materials – carbon nanotube composites, Composites: Part B, 33, 263-277
• 7. Madhu S., Subba Rao V.V., Pramod Kumar P., Chandramouli K., 2012, Static and dynamic analysis of carbon nanotube reinforced polymer composite plates, Material science Research Journal, 6, 3-4
• 8. Ounaies Z., Park C., Wise K.E., Siochi E.J., Harrison J.S., 2003, Electrical properties of single wall carbon nanotube reinforced polyimide composites, Composite Science Technology, 63 1637-1646
• 9. Popov V.N., Doren V.E., Balkanski M., 2000, Elastic properties of crystals of single-walled carbon nanotubes, Solid State Communications, 114, 359-399
• 10. Reddy J.N., 2004, Mechanics of Laminated Composite Plates and Shells: Theory and Analysis, 2nd edition, CRC Press
• 11. Saito R., Dresselhaus G., Dresselhaus M.S., 1999, Physical Properties of Carbon Nanotubes, Imperial College Press, London
• 12. Shi D.L., Feng X.Q., Huang Y.Y., Hwang K.C., Gao H., 2004, The effect of nanotube waviness and agglomeration on the elastic property of carbon nanotube-reinforced composites, Journal of Engineering Materials and Technology, 126, 250-257
• 13. Silani M., Talebi H., Ziaei-Rad S., Kerfriden P., Bordas S.P., Rabczuk T., 2014, Stochastic modelling of clay/epoxy nanocomposites, Composite Structures, 118, 241-249
• 14. Tserpes K.I., Papnikos P., 2005, Finite element modelling of single-walled carbon nanotubes, Composites: Part B, 36, 468-477
• 15. Wang Q., 2008, Atomic transportation via carbon nanotubes, Nano Letters, 9, 1, 245-249
• 16. Weisenberger M.C., Grulke E.A., Jacques D., Rantell T., Andrews R., 2003, Enhanced mechanical properties of polyacrylonitrile/multiwall carbon nanotube composite fibers, Jorunal of Nanoscience Nanotechnology, 3, 6
• 17. Wuite J., Adali S., 2005, Deflection and stress behaviour of nanocomposite reinforced beams using a multiscale analysis, Composite Structures, 71, 3-4, 388-396
• 18. Xiao J.R., Gama B.A., Gillespie Jr J.W., 2005, An analytical molecular structural mechanics model for the mechanical properties of carbon nanotubes, International Journal of Solids Structures, 42, 3075-3092
• 19. Zhang Y., Zhao J., Wei N., Jiang J., Gong Y., Rabczuk T., 2013, Effects of the dispersion of polymer wrapped two neighbouring single walled carbon nanotubes (swnts) on nanoengineering load transfer, Composites: Part B Engineering, 45, 1, 1714-1721
• 20. Zhang Z., Liu B., Huang Y., Hwang K., Gao H., 2010, Mechanical properties of unidirectional nanocomposites with non-uniformly or randomly staggered platelet distribution, Journal of Mechanics and Physics of Solids, 58, 10, 1646-1660

Uwagi

PL

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2018).