Dynamic mechanical characterization of epoxy composite reinforced with areca nut husk fiber

• Autorzy: Muralidhar N. , Kaliveeran Vadivuchezhian , Arumugam V. , Srinivasula Reddy I.

Identyfikatory

DOI

10.24425/ame.2020.131683

• Języki publikacji: EN

Abstrakty

EN

Natural fiber polymer composites are gaining focus as low cost and light weight composite material due to the availability and ecofriendly nature of the natural fiber. Fiber composites are widely used in civil engineering, marine and aerospace industries where dynamic loads and environmental loads persist. Dynamic analysis of these composites under different loading and environmental conditions is essential before their usage. The present study focuses on the dynamic behavior of areca nut husk reinforced epoxy composites under different loading frequencies (5 Hz, 10 Hz and 15 Hz) and different temperatures (ranging from 28◦C to 120◦C). The effect of loading and temperature on storage modulus, loss modulus and glass transition temperature was analyzed. Increase in storage modulus is observed with increase in loading frequency. The storage modulus decreases with increase in temperature. The glass transition temperature of the composite is determined to be 105◦C. The elastic modulus calculated from the DMA data is compared with three point bending test

Słowa kluczowe

EN

areca nut husk fiber; dynamic mechanical analysis; storage modulus; loss modulus; elastic modulus; damping factor

PL

włókno z łuski orzecha arekowego; dynamiczna analiza mechaniczna; moduł zachowawczy; moduł stratności; moduł sprężystości; współczynnik tłumienia

• Wydawca: Komitet Budowy Maszyn PAN
• Czasopismo: Archive of Mechanical Engineering
• Rocznik: 2020
• Tom: LXVII, nr 1
• Strony: 57--72
• Opis fizyczny: Bibliogr. 32 poz., rys., tab., wykr.

Twórcy

autor

Muralidhar N.

• Department of Applied Mechanics and Hydraulics, National Institute of Technology Karnataka, Mangalore, India.

autor

Kaliveeran Vadivuchezhian

• Department of Applied Mechanics and Hydraulics, National Institute of Technology Karnataka, Mangalore, India.

autor

Arumugam V.

• Department of Aerospace Engineering, Madras Institute of Technology, Anna University, Chennai, India.

autor

Srinivasula Reddy I.

• Department of Aerospace Engineering, Madras Institute of Technology, Anna University, Chennai, India.

Bibliografia

• [1] S.E. Zeltmann, K.A. Prakash, M. Doddamani, and N. Gupta. Prediction of modulus at various strain rates from dynamic mechanical analysis data for polymer matrix composites. Composites Part B: Engineering, 120:27–34, 2017. doi: 10.1016/j.compositesb.2017.03.062.
• [2] X. Xu, C. Koomson, M. Doddamani, R.K. Behera, and N. Gupta. Extracting elastic modulus at different strain rates and temperatures from dynamic mechanical analysis data: A study on nanocomposites. textitComposites Part B: Engineering, 159:346–354, 2018. doi: 10.1016/j.compositesb.2018.10.015.
• [3] Q. Fu, Y. Xie, G. Long, D. Niu, and H. Song. Dynamic mechanical thermo-analysis of cement and asphalt mortar. Powder Technology, 313:36–43, 2017. doi: 10.1016/j.powtec.2017.02.058.
• [4] S.K. Adhikary, Z. Rudzionis, A. Balakrishnan, and V. Jayakumar. Investigation on the mechanical properties and post-cracking behavior of polyolefin fiber reinforced concrete. Fibres, 7(1):8, 2019. doi: 10.3390/fib7010008.
• [5] S. Mindess and A.J Boyd. High performance fibre reinforced concrete. In: Advances in Building Technology. Proceedings of the International Conference on Advances in Building Technology, vol. 1, pages 873–880, Hong Kong, China, 4–6 Dec. 2002.
• [6] B. Boulekbache, M. Hamrat, M. Chemrouk, and S. Amziane. Flowability of fibre-reinforced concrete and its effect on the mechanical properties of the material. Construction and Building Materials, 24(9):1664–1671, 2010. doi: 10.1016/j.conbuildmat.2010.02.025.
• [7] P.V. Peltonen. Characterization and testing of fibre-modified bitumen composites. Journal of Material Science, 26:5618–5622, 1991. doi: 10.1007/BF02403965.
• [8] M.B. Hoque, Solaiman, A.B.M. Hafizul Alam, H. Mahmud, and A. Nobi. Mechanical, degradation and water uptake properties of fabric reinforced polypropylene based composites: effect of alkali on composites. Fibres, 6(4):94, 2018. doi: 10.3390/fib6040094.
• [9] S. Ahmed and C.A. Ulven. Dynamic in-situ observation on the failure mechanism of flax fiber through scanning electron microscopy. Fibers, 6(1):17, 2018. doi: 10.3390/fib6010017.
• [10] V. Vilay, M. Mariatti, R.M. Taib, and M. Todo. Effect of fiber surface treatment and fiber loading on the properties of bagasse fiber-reinforced unsaturated polyester composites. Composite Science and Technology, 68(3-4):631–638, 2008. doi: 10.1016/j.compscitech.2007.10.005.
• [11] S. Mohanty, S.K. Verma, and S.K. Nayak. Dynamic mechanical and thermal properties of MAPE treated jute/HDPE composites. Composite Science and Technology, 66(3-4):538–547, 2006. doi: 10.1016/j.compscitech.2005.06.014.
• [12] S.K. Saw, G. Sarkhel, and A. Choudhury. Dynamic mechanical analysis of randomly oriented short bagasse/coir hybrid fibre-reinforced epoxy novolac composites. Fibers Polymers, 12(4):506–513, 2011. doi: 10.1007/s12221-011-0506-5.
• [13] Y. Lazim, S.M. Salit, E.S. Zainudin, M. Mustapha, and M. Jawaid. Effect of alkali treatment on the physical, mechanical, and morphological properties of waste betel nut (Areca catechu) husk fibre. BioResources, 9(4):7721-7736, 2014. doi: 10.15376/biores.9.4.7721-7736.
• [14] N. Muralidhar, V. Kaliveeran, V. Arumugam, and I. Srinivasula Reddy. A Study on areca nut husk fibre extraction, composite panel preparation and mechanical characteristics of the composites. Journal of The Institution of Engineers (India): Series D, 100:135–145, 2019. doi: 10.1007/s40033-019-00186-1.
• [15] S. Nayak, J.R. Mohanty, P.R. Samal, and B.K. Nanda. Polyvinyl chloride reinforced with areca sheath fiber composite – An experimental study. Journal of Natural Fibers, 2018. doi: 10.1080/15440478.2018.1534186.
• [16] M. Jawaid, H.P.S. Abdul Khalil, A. Hassan, R. Dungani, and A. Hadiyane. Effect of jute fibre loading on tensile and dynamic mechanical properties of oil palm epoxy composites. Composites Part B: Engineering, 45(1):619–624, 2013. doi: 10.1016/j.compositesb.2012.04.068.
• [17] V.G. Geethamma, G. Kalaprasad, G. Groeninckx, and S. Thomas. Dynamic mechanical behavior of short coir fiber reinforced natural rubber composites. Composites Part A: Applied Science and Manufacturing, 36(11):1499–1506, 2005. doi: 10.1016/j.compositesa.2005.03.004.
• [18] L.A. Pothan, Z. Oommen, and S. Thomas. Dynamic mechanical analysis of banana fiber reinforced polyester composites. Composites Science and Technology, 63(2):283–293, 2003. doi: 10.1016/S0266-3538(02)00254-3.
• [19] M. Ramesh. Flax (Linum usitatissimum L.) fibre reinforced polymer composite materials: A review on preparation, properties and prospects. Progress in Materials Science, 102:109– 166, 2019. doi: 10.1016/j.pmatsci.2018.12.004.
• [20] S. Dhanalakshmi, B. Basavaraju, and P. Ramadevi. Areca fibre reinforced polypropylene composites: influence of mercerisation on the tensile behavior. International Journal of Material Science and Manufacturing Engineering, 41(2):2051–6851, 2014.
• [21] C.V. Srinivasa, A. Arifulla, N. Goutham, T. Santhosh, H.J. Jaeethendra, R.B. Ravikumar, S.G. Anil, D.G. Santhosh Kumar, and J. Ashish. Static bending and impact behaviour of areca fibers composites. Materials & Design, 32(4):2469–2475, 2011. doi: 10.1016/j.matdes.2010.11.020.
• [22] L. Mohammed, M.N.M. Ansari, G. Pua, M. Jawaid, and M.S. Islam. A review on natural fiber reinforced polymer composite and its applications. International Journal of Polymer Science, ID243947, 2015. doi: 10.1155/2015/243947.
• [23] E. Jayamani, S. Hamdan, Md R. Rahman, and M. Khusairy Bin Bakri. Investigation of fibre surface treatment on mechanical, acoustical and thermal properties of betelnut fibre polyester composites. Procedia Engineering, 97:545–554, 2014. doi: 10.1016/j.proeng.2014.12.282.
• [24] K.P. Menard. Dynamic Mechanical Analysis. A practical Introduction. 2nd ed., CRC Press, Boca Raton, 2008.
• [25] D. Shanmugam, M. Thiruchitrambalam. Static and dynamic mechanical properties of alkali treated unidirectional continuous Palmyra Palm Leaf Stalk Fiber/jute fiber reinforced hybrid polyester composites. Materials & Design, 50:533-542, 2013. doi: 10.1016/j.matdes.2013.03.048.
• [26] P. Vimalanathan, N. Venkateshwaran, S.P. Srinivasan, V. Santhanam, and M. Rajesh. Impact of surface adaptation and Acacia nilotica biofiller on static and dynamic properties of sisal fiber composite. International Journal of Polymer Analysis and Characterization, 23(2):99–112, 2018. doi: 10.1080/1023666X.2017.1387689.
• [27] D.O. Obada, L.S. Kuburi, M. Dauda, S. Umaru, D. Dodoo-Arhin, M.B. Balogun, I. Iliyasu, and M.J. Iorpenda. Effect of variation in frequencies on the viscoelastic properties of coir and coconut husk powder reinforced polymer composites. Journal of King Saud University – Engineering Sciences, 32(2):148–157, 2020. doi: 10.1016/j.jksues.2018.10.001.
• [28] N. Rajini, J.T.W. Jappes, P. Jeyaraj, S. Rajakarunakaran, and C. Bennet. Effect of montmorillonite nanoclay on temperature dependence mechanical properties of naturally woven coconut sheath/polyester composite. Journal of Reinforced Plastics and Composites, 32(11):811–822, 2013. doi: 10.1177/0731684413475721.
• [29] Dipa Ray, B.K. Sarkar, S. Das, and A.K. Rana. Dynamic mechanical and thermal analysis of vinylester-resin-matrix composites reinforced with untreated and alkali-treated jute fibres. Composites Science and Technology, 62(7-8):911–917, 2002. doi: 10.1016/S0266-3538(02)00005-2.
• [30] P. Vimalanathan, N. Venkateshwaran, and V. Santhanam. Mechanical, dynamic mechanical, and thermal analysis of Shorea robusta-dispersed polyester composite. International Journal of Polymer Analysis and Characterization, 21(4):314–326, 2016. doi: 10.1080/1023666X.2016.1155818.
• [31] M.S. Huda, L.T. Drzal, A.K. Mohanty, M. Misra. Effect of fiber surface-treatments on the properties of laminated biocomposites from poly(lactic acid) (PLA) and kenaf fibers. Composites Science and Technology, 68(2):424–432, 2008. doi : 10.1016/j.compscitech.2007.06.022.
• [32] J.M. Gere and S.P.Timoshenko. Mechanics of Materials. 2nd ed. PWS Publishers, Boston, 1984.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).