AHSS steel welding with micro-jet cooling in mobile platforms

• Autorzy: Węgrzyn Tomasz , Szczucka-Lasota Bożena , Piwnik Jan , Jurek Adam

Identyfikatory

DOI

10.21307/tp-2020-012

• Języki publikacji: EN

Abstrakty

EN

This paper focuses on the weldability of advanced high-strength steels (AHSS), commonly used by the automotive industry and civil engineering. These steels have found application in the construction of mobile platforms mounted on vehicles. AHSS significantly outperform other materials when it comes to performance flexibility and mass reduction potential. This article verifies whether the application of micro-jet cooling technology during the welding process might help to overcome these issues. The aim of this article is to choose welding parameters in the process with micro-jet cooling to obtain the best mechanical properties of the welded structure (elongation). The best welding parameters for these difficult-to-weld constructions are presented in detail.

Słowa kluczowe

EN

AHSS steel; mobile platforms; civil engineering; transport; micro-jet cooling

PL

stal AHSS; platforma mobilna; inżynieria lądowa; transport; chłodzenie mikrostrumieniowe

• Wydawca: Wydawnictwo Politechniki Śląskiej
• Czasopismo: Transport Problems
• Rocznik: 2020
• Tom: T. 15, z. 1
• Strony: 131--139
• Opis fizyczny: Bibliogr. 16 poz.

Twórcy

autor

Węgrzyn Tomasz

• Silesian University of Technology, Krasińskiego 8, 40-019 Katowice, Poland

autor

Szczucka-Lasota Bożena

• Silesian University of Technology, Krasińskiego 8, 40-019 Katowice, Poland

autor

Piwnik Jan

• COBRABID Sp. z o. o. Łucka 15, 00-842 Warsaw, Poland

autor

Jurek Adam

• Novar Sp. z o. o. Towarowa 2, 44-100 Gliwice, Poland

Bibliografia

• 1. Nayak, S.S. & Biro, E. & Shou, Y. Laser welding of advanced high-strength steels (AHSS). Welding and Joining of Advanced High Strength Steels. Woodhead Publishing. 2015. P. 71-92.
• 2. Tumuluru, M. Resistance spot welding techniques for high-strength steels (AHSS). Welding and Joining of Advanced High Strength Steels. Woodhead Publishing. 2015. P. 55-70.
• 3. Barsukov, V. & Tarasiuk, W. & Shapovalov, V. & Krupicz, B. & Barsukov, V. Express Evaluation Method of Internal Friction Parameters in Molding Material Briquettes. Journal of Friction and Wear. 2017. Vol. 38. No. 1. P. 71-76.
• 4. Hashimoto, F. &. Lahoti, G.D. Optimization of Set-up Conditions for Stability of The Centerless Grinding Process. CIRP Annals - Manufacturing Technology. 2004. Vol. 53. No. 1. P. 271-274.
• 5. Bleck, W. & Larour, P. & Baeumer, A. High Strain Tensile Testing of Modern Car Body Steels. Material Forum Volume. 2005. Vol. 29. P. 21-28.
• 6. WorldAutoSteel. A programme of the World Steel Association. Available at: https://www.worldautosteel.org/steel-basics/automotive-steel-definitions/
• 7. Grajcar, A. & Różański, M. Weldability of high-strength multiphase AHSS steels. Welding Technology Review. No. 3. 2014. P. 22-31.
• 8. Tumuluru, M. Resistance spot welding of coated high-strength dual-phase steels. Welding Journal. 2006. No. 8. P. 31-37.
• 9. Gould, J.E. & Khurana, S.P. & Li, T. Predictions of microstructures when welding automotive advanced high-strength steels phase. Welding Journal. 2006. No. 5. P. 111-118.
• 10. Takahashi, M. Development of High Strength Steels for Automobiles. Steel Research Laboratories. Nippon Steel Technical Report. 2003. No. 87. P. 27.
• 11. Krupitzer, M. Designing and Manufacturing Vehicles with Advanced Strength Steels. Galvatech'04 Conference Proceedings. Chicago. USA. April. 2004. P. 31-50.
• 12. Celin, R. & Burja, J. Effect of cooling rates on the weld heat affected zone coarse grain microstructure, Metallurgical and Materials Engineering. 2018. Vol. 24. No. 1. P. 37-44.
• 13. Darabi, J. & Ekula, K. Development of a chip-integrated micro cooling device, Microelectronics Journal. 2003. Vol. 34. No. 11. P. 1067-1074.
• 14. Muszynski, T. & Mikielewicz, D. Structural optimization of microjet array cooling system. Applied Thermal Engineering. 2017. Vol. 123. P. 103-110.
• 15. Hadryś, D. Impact load of welds after micro-jet cooling. Archives of Metallurgy and Materials. 2005. Vol. 60. No. 4. P. 2525-2528.
• 16. Piotrowicz, P. & Kalwas, J. & Leszczyński, M. Stand for linear welding with additional micro-jet cooling, Scientific and Didactic Equipment. Vol. 23. No. 4. P. 158-163.

Uwagi

PL

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).