PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

The Effect of Non-Fully Filled Gaps in Elastic Tribological Contacts

Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
In recent papers, the authors of this paper investigated the dynamic behavior in partially fluid-filled tribological gaps with a novel modeling technique. The impact of the fluid amount towards the buildup of hydrodynamic pressures has been demonstrated. It shows high nonlinearities with respect to the correlation of the filling ratio and the mean pressure, in particular near the fully filled regime. So far, this modeling technique neglected deformations caused by the pressures in the gap. This paper is focused on fundamental studies on the impact of elastic deformations in combination with varying filling ratios onto the pressure characteristic. The studies are performed using an example of two ellipsoidal bodies moving relative to one another. The size of the ellipsoids is varied which allows modifying the gap topography. In this paper, the essential effect of elastic deformations at very small gaps is shown. It is discussed that it is very complex to formulate a general rule about parameter sets that give the possibility to neglect elastic deformations.
Rocznik
Strony
107--115
Opis fizyczny
Bibliogr. 5 poz., wykr.
Twórcy
autor
  • Braunschweig University of Technology, Institute of Dynamics and Vibrations
autor
  • Braunschweig University of Technology, Institute of Dynamics and Vibrations
  • Braunschweig University of Technology, Institute of Dynamics and Vibrations
Bibliografia
  • 1. Bhushan, Bharat (2002). Introduction to Tribology. John Wiley & Sons.
  • 2. Czichos, Horst and Habig, Karl-Heinz (2010). Tribologie-Handbuch: Tribometrie, Tribomaterialien, Tribotechnik. Springer-Verlag.
  • 3. Heshmat, Hooshang (2010). Tribology of interface layers. CRC Press.
  • 4. Müller, Michael and Jäschke, Hannah and Bubser, Florian and Ostermeyer, Georg-Peter (2014). Simulative studies of tribological interfaces with partially filled gaps. Tribology International, 78:195–209.
  • 5. Müller, Michael and Ostermeyer, Georg-Peter and Bubser, Florian (2013). A contribution to the modeling of tribological processes under starved lubrication. Tribology International, 64:135–147.
Uwagi
PL
Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-fc78b7f6-c9bc-4f1a-87e3-5710315446a9
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.