Shaping the Microstructure of Cast Iron Automobile Cylinder Liners Aimed at Providing High Service Properties

• Autorzy: Orłowicz A. W. , Mróz M. , Tupaj M. , Trytek A.

Identyfikatory

DOI

10.1515/afe-2015-0043

• Języki publikacji: EN

Abstrakty

EN

The paper presents an analysis of factors affecting the wear of cylinder liners. The effect of the graphite precipitation morphology on the cylinder liner wear mechanism is presented. Materials used to cast cylinder liners mounted in a number of engines have been examined for their conformity with requirements set out in applicable Polish industrial standard. A casting for a prototype cylinder liner has been made with a microstructure guaranteeing good service properties of the part.

Słowa kluczowe

EN

cast iron; automobile cylinder; service properties

PL

żeliwo; cylinder samochodowy; właściwości użytkowe

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2015
• Tom: Vol. 15, iss. 2
• Strony: 79--84
• Opis fizyczny: Bibliogr. 13 poz., rys., tab.

Twórcy

autor

Orłowicz A. W.

• Department of Casting and Welding, Rzeszow University of Technology, al. Powstańców Warszawy 12, 35-959 Rzeszów

autor

Mróz M.

• Department of Casting and Welding, Rzeszow University of Technology, al. Powstańców Warszawy 12, 35-959 Rzeszów

autor

Tupaj M.

• Department of Casting and Welding, Rzeszow University of Technology, al. Powstańców Warszawy 12, 35-959 Rzeszów

autor

Trytek A.

• Department of Casting and Welding, Rzeszow University of Technology, al. Powstańców Warszawy 12, 35-959 Rzeszów

Bibliografia

• [1] Orłowicz, W., Opiekun, Z., Kościelny, E. (1985). Structural examination of DX 03/2000 engine cylinder liner for Renaul and Opel cars An unpublished study. Warszawa: OBR SO. (in Polish).
• [2] Orłowicz, W., Opiekun, Z., Kościelny, E. (1986). Materials analysis of cylinder liners denoted with symbols 1 and 2 An unpublished study. Warszawa: OBR SO. (in Polish).
• [3] Orłowicz, W., Opiekun, Z., Kościelny, E. (1986). Materials analysis of cylinder liners denoted with symbols 1 through 64 An unpublished study. Warszawa: OBR SO. (in Polish).
• [4] Orłowicz, W., Opiekun, Z., Kościelny, E. (1986). Materials analysis of a cylinder liner manufactured by Ricardo company Warszawa: OBR SO. (in Polish).
• [5] Orłowicz, W., Opiekun, Z., Kościelny, E. (1987). Fabrication of castings for WARS engine cylinder liners An unpublished study. Warszawa: OBR SO. (in Polish).
• [6] Orłowicz, W. & Trytek, A. (2003). Effect of rapid solidification on sliding wear iron castings. WEAR. 254, 154-163.
• [7] Gray, ductile, and malleable cast iron. Metallographic examination. Determination of microstructure. (in Polish). Polish standard PN-75/H-04661.
• [8] Pytko, S. & Pytko, P. (1991). Issues concerning lubrication of future combustion engines, Tribologia. 3, 57-60.
• [9] Okulicz, W., Pawlus, P. (1998). Cylinder liner wear in automotive combustion engine. Proceedings of the conference MECHANICS 98 (pp. 195–204). Rzeszów: Politechnika Rzeszowska.
• [10] Goetzewerke company information materials.
• [11] Kościelny, E., Orłowicz, W., Opiekun, Z., Michalski, J. (1987). Automotive engine materials tests Warszawa: OBR SO. (in Polish).
• [12] Orłowicz, W. & Trytek, A. (2007). Shaping microstructure and service properties of cast iron castings with surface improved by means of electric arc plasma. A monograph Archiwum Odlewnictwa. 7(23). (in Polish).
• [13] Alloyed cast iron cylinder liners. General requirements Industry standard BN-78/1372-01. (in Polish).