Nanofluid assistance in machining processes – properties, mechanisms and applications: a review

• Autorzy: Grzesik Wit

Identyfikatory

DOI

10.36897/jme/133477

• Języki publikacji: EN

Abstrakty

EN

A special group of hybrid assisted processes termed media-assisted processes which apply liquid media with special additives in the form of nanoparticles supplied to the cutting zone is overviewed. Special attention is paid to minimum quantity lubrication (MQL) technique with the use of nanofluids. In this review paper some important thermal and tribological effects resulting from the applications of various nanoparticles are outlined and compared. The MQL-nano cutting fluid mechanisms (rolling and ploughing) are described. In particular, some important quantitative effects concerning thermal and tribological behaviour of the cutting process as well as surface quality are presented.

Słowa kluczowe

EN

nanofluid; nanoparticle; machining process; minimum quantity lubrication

• Wydawca: Wydawnictwo Wrocławskiej Rady FSNT NOT
• Czasopismo: Journal of Machine Engineering
• Rocznik: 2021
• Tom: Vol. 21, No. 2
• Strony: 75--90
• Opis fizyczny: Bibliogr. 21 poz., rys., tab.

Twórcy

autor

Grzesik Wit

• Manufacturing and Materials Engineering, Opole University of Technology, Opole, Poland

Bibliografia

• [1] LAUWERS B., KLOCKE F., KLINK A., TEKKAYA A.E., NEUGEBAUER R., MCINTOSH D., 2014, Hybrid Processes in Manufacturing, Annals of the CIRP Manufacturing Technology, 63/2, 561–583.
• [2] GRZESIK W., 2018, Media-Assisted Machining Processes, Mechanik, 91/12, 1050–1056, https://doi.org/10.17814/mechanik.2018.12.186.
• [3] KULKARNI H.B., NADAKATTI M.M., PATIL M.S., KULKARNI R.M., 2017, A Review on Nanofluids for Machining, Current Nanoscience, 13/6, 634–653, https://doi.org/10.2174/1573413713666170623094121.
• [4] SIDIK N., SAMION S., GHADERIAN J., YAZID M., 2017, Recent Progress on the Application of Nanofluids in Minimum Quantity Lubrication Machining, A Review, Int. Journal of Heat and Mass Transfer, 108, 79–89. https://doi.org/10.1016/j.ijheatmasstransfer.2016.11.105.
• [5] SHOKOOHI Y., SHEKARIAN E., 2016, Application of Nanofluids in Machining Processes- a Review, J. Nanoscience and Technology, 2, 59–63.
• [6] KHANDEKAR S., SANKAR M., RAMKUMAR J., 2012, Nano-Cutting Fluid for Enhancement of Metal Cutting Performance, Materials and Manufacturing Processes, 27, 1–5. https://doi.org/10.1080/10426914.2011.610078.
• [7] GUPTA M., JAMIL M., WANG X., SONG Q., LIU Z., MIA M., et al., 2019, Performance Evaluation of Vegetable Oil-Based Nano-Cutting Fluids in Environmentally Friendly Machining of Inconel-800 Alloy, Materials, 12, 2702, https://doi.org/10.3390/ma12172792.
• [8] YOO D.H., HONG K.S., YANG H.S., 2007, Study of Thermal Conductivity of Nanofluids for the application of Heat Transfer Fluids, Thermochim. Acta, 455/1–2, 66–69, https://doi:10.1016/j.tca.2006.12.006.
• [9] SAMUEL J., RAFIEE J., DHIMAN P., YU Z., KORATKAR N., 2011, Graphene Colloidal Suspensions as High Performance Demi-Synthetic Metal-Working Fluids, J. Physical Chemistry, 115, 3410–3415, https://doi.org/10.1021/jp110885n.
• [10] HEGAB H., KISHAWY H.A., UMER U., MOHANY A., 2019, A Model for Machining with Nano-Additives Based Minimum Quantity Lubrication, Int. J. Advanced Manufacturing Technology, 102, 2013–2028, https://doi.org/10.1007/s00170-019-03294-0.
• [11] HEGAB H., UMER U., ESAWI A., KISHAWY H.A., 2020, Tribological Mechanisms of Nano-Cutting Fluid Minimum Quantity Lubrication: A Comparative Performance Analysis Model, Int. J. Advanced Manufacturing Technology, 108, 2, 3133–3139, https://doi.org/10.1007/s00170-020-05450-3.
• [12] GHAEDNIA H., JACKSON R., 2013, The Effect of Nanoparticles on the Real Area of Contact, Friction and Wear, ASME, Journal of Tribology, 135/4, 041603, https://doi.org/10.1115/1.4024297.
• [13] HEGAB H, DARRAS B., KISHAWY H.A., 2018, Sustainability Assessment of Machining with Nano-Cutting Fluids, Procedia Manufacturing, 26, 245–254, https://doi.org/10.1016/j.promfg.2018.07.033.
• [14] NAM J.S., LEE P.H., LEE S.W., 2011, Experimental Characterization of Micro-Drilling Process Using Nanofluid Minimum Quantity Lubrication, Int. J. Mach. Tools Manuf., 51, 649–652, https://doi.org/10.1016/j.ijmachtools.2011.04.005.
• [15] LI M., YU T., ZHANG R., YANG L., LI H., WANG W., 2018, MQL Milling of TC4 Alloy by Dispersing Graphene into Vegetable Oil-Based Cutting Fluid, Int. J. Advanced Manufacturing Technology, 99, 1735–1753, https://doi.org/10.1007/s00170-018-2576-7.
• [16] GRZESIK W., 2017, Advanced Machining Processes of Metallic Materials, Amsterdam, Elsevier.
• [17] GŰNAN F., KIVAK T., YILDRIM C., SARIKAYA M., 2020, Performance Evaluation of MQL with Al2O3 Mixed Nanofluids Prepared at Different Concentrations in Milling of Hastelloy C276 Alloy, J. Materials Research and Technology, 9/5, 10386–10400, https://doi.org/10.1016/j.jmrt.2020.07.018.
• [18] KADIRGAMA K., 2020, Nanofluid As an Alternative Coolant in Machining: A Review, J. Advanced Research in Fluid Mechanics and Thermal Sciences, 69, 163–173, https://doi.org/10.37934/arfmts.69.1.163173.
• [19] MINH D.T., THE L.T., BAO N.T., 2017, Performance of Al2O3 Nanofluids in Minimum Quantity Lubrication in Hard Milling of 60Si2Mn Steel Using Cemented Carbide Tools, Advances in Mechanical Engineering, 9/7, 1–9, https://doi.org/10.1177/1687814017710618.
• [20] MARGUES A., NARALA S.K., MACHADO A.R. GUNDA R.K., 2015, Performance Assessment of MQSL: Minimum Quantity Solid Lubricant During Turning of Inconel 718, Proc. Inst. Mech. Eng. Part B, J. Engineering Manufacture, 229, 1–16, https://doi.org/10.1177/0954405415592128.
• [21] LEE P.H., NAM J.S., LI C., LEE S.W., 2012, An Experimental Study on Micro-Grinding Process with Nanofluid Minimum Quantity Lubrication (MQL), Int. J. Precision Eng. Manuf., 13, 331–338, https://doi.org/10.1007/ S12541- 012-0042-2.

Uwagi

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).