Computer Simulation of the Impact of Optimization of Width in the Helical Cylindrical Gear on Bearing and Durability. Part 2. Angular Correction of the Gear Profile

• Autorzy: Czerniec Myron

Identyfikatory

DOI

10.12913/22998624/99038

• Języki publikacji: EN

Abstrakty

EN

On the basis of the elaborated calculation method, the optimal width in involute helical gears was determined ensuring a constant length of the line of contact between the meshing gears that is based on the novel method for determining the wear and durability of the gears which was employed to measure the maximum contact pressures, linear wear of teeth and durability of the gear with angular correction of the profile. It was possible to determine the variations in the parameters for the optimized gear describing the meshing gears at different values of the profile correction coefficients.

Słowa kluczowe

EN

block calculation method; cylindrical helical gear; angular correction of engagement; optimal gear width; maximum contact pressures; tooth wear; gear durability

PL

metoda obliczania bloku; walcowe koła zębate; korekcja kątowa sprzężenia; optymalna szerokość koła zębatego; maksymalne naciski kontaktowe; zużycie zębów; trwałość kół

• Wydawca: Lublin University of Technology ; Polish Society of Ecological Engineering (PTIE), Branch of PTIE in Lublin
• Czasopismo: Advances in Science and Technology. Research Journal
• Rocznik: 2019
• Tom: Vol. 13, no 2
• Strony: 1--6
• Opis fizyczny: Bibliogr. 3 poz., fig.

Twórcy

autor

Czerniec Myron

• Lublin University of Technology, ul. Nadbystrzycka 36, 20-618 Lublin, Poland

Bibliografia

• 1. Chernets M.V., Yarema R.Ya., Chernets Yu.M., A method for the evaluation of the influence of correction and wear of the teeth of a cylindrical gear on its durability and strength. Part 1. Service live and wear. Materials Science, 2012, 3, 289–300.
• 2. Chernets M., Kiełbiński J., Chernets Yu., A study on the impact of teeth meshing conditions and profile correction on the carrying capacity, wear and life of a cylindrical gear. Tribologia, 2016, 2, 25–43.
• 3. Chernets M., Computer Simulation of the Impact of Optimization of Width in the Helical Cylindrical Gear on Bearing and Durability. Part 1. Height Correction of the Gear Profile. Adv. Sci. Technol. Res. J. 2019, 13(1), 52–59.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).