Technical diagnostics of industrial double twist twinner machine for data cables

• Autorzy: Krenický Tibor , Ružbarský Juraj , Coranič Tomáš , Maščeník Jozef
• Języki publikacji: EN

Abstrakty

EN

The presented article focuses on the diagnostic measurement and evaluation of vibrations of equipment used for data-cable twisted pairing manufacture. A short description of the process of the data cables manufacturing process to which the diagnosed device belongs is provided and the qualitative parameters of the data cables are mentioned. The experimental part is devoted to the experimental diagnostics of the given system in order to locate and identify the possible reason for the occurrence of the parameter´s critical value of the loss of the data cable. When deterioration of electric properties was detected, monitoring the basic oscillation characteristics has been deployed as the key tool to detecting damaged machine parts, and avoiding quality deterioration of the products in the manufacturing process. Finally, the quality of the paired cables after the repair has been confirmed by measurements verifying the efficiency of the measures performed.

Słowa kluczowe

EN

vibrodiagnostics; maintenance; twisted pair cables; return loss; cable fault

PL

wibrodiagnostyka; konserwacja; kable typu skrętka; usterka kabla

• Wydawca: STE GROUP
• Czasopismo: Systemy Wspomagania w Inżynierii Produkcji
• Rocznik: 2022
• Tom: Vol. 11, iss. 2
• Strony: 35--46
• Opis fizyczny: Bibliogr. 22 poz.

Twórcy

autor

Krenický Tibor

• Technical University of Košice Faculty of Manufacturing Technologies Štúrova 31, 080 01 Prešov, Slovakia

• https://orcid.org/0000-0002-0242-2704

autor

Ružbarský Juraj

• Technical University of Košice Faculty of Manufacturing Technologies Štúrova 31, 080 01 Prešov, Slovakia

autor

Coranič Tomáš

• Technical University of Košice Faculty of Manufacturing Technologies Štúrova 31, 080 01 Prešov, Slovakia

autor

Maščeník Jozef

• Technical University of Košice Faculty of Manufacturing Technologies Štúrova 31, 080 01 Prešov, Slovakia

Bibliografia

• [1] J. Peterka, P. Bozek and Y. Nikitin. "Diagnostics of automated technological devices". MM Science Journal, october 2020, Pp. 4027-4034. DOI: 10.17973/MMSJ.2020_10_2020051. ISSN 1803-1269, 1805-0476.
• [2] W. Bialy and J. Ruzbarsky. "Breakdown cause and effect analysis. Case study". Management Systems in Production Engineering, vol. 26, pp. 83-87, 2018.
• [3] T. Krenicky. "The Monitoring of Technical Systems Operation Using Virtual Instrumentation". Strojarstvo extra, 2010, No. 5, pp. 25/1-25/2. ISSN 1335-2938. (in Slovak)
• [4] Y. Nikitin. "Diagnostics of BLDC motor winding based on a model approach in the state space". IOP Conference Series: Materials Science and Engineering, 2020, 971(4), 042101. Modeling of technical systems. CAD/CAM/CAE - technologies. doi:10.1088/1757-899X/971/4/042101. ISSN 1757-899X.
• [5] Y. Turygin, P. Božek, I. Abramov, Y. Nikitin. "Reliability Determination and Diagnostics of a Mechatronic System". Advances in Science and Technology. Vol. 12, No. 2, June 2018, pp. 274-290. DOI: 10.12913/22998624/92298. ISSN 2299-8624.
• [6] T. Magesacher, P. Odling, P.O. Börjesson and T. Nordström, "Verification of multi-pair copper cable model by measurements", IEEE Transactions on Instrumentation and Measurements, vol. 56, no. 5, pp. 1883-1886, Oct. 2007.
• [7] T. Krenicky. "Implementation of Virtual Instrumentation for Machinery Monitoring". In: Scientific Papers: Operation and Diagnostics of Machines and Production Systems Operational States: Vol. 4, RAM-Verlag, Lüdenscheid, 2011, pp. 5-8. ISBN 978-3- 942303-10-1
• [8] M. Jakovljevic, T. Magesacher, K. Ericson, P. Odling, P. O. Borjesson and S. Zazo, "Common Mode Characterization and Channel Model Verification for Shielded Twisted Pair (STP) Cable," 2008 IEEE International Conference on Communications, 2008, pp. 447-451, doi: 10.1109/ICC.2008.89.
• [9] J. Poltz, M. Josefsson and J. Beckett, "Return loss in twisted pair cables," Proceedings. 9th IEEE Workshop on Signal Propagation on Interconnects, 2005., 2005, pp. 97-100, doi: 10.1109/SPI.2005.1500910.
• [10] R. Jobava et al., "Development of simulation model for shielded twisted pair cables in EMC immunity problems," Proceedings of Xth International Seminar/Workshop on Direct and Inverse Problems of Electromagnetic and Acoustic Wave Theory, 2005, pp. 84-89, doi: 10.1109/DIPED.2005.201590.
• [11] M. Sarma and S. K. Sarma, "Characteristics Evaluation of Copper Based Networking Cables," 2013 UKSim 15th International Conference on Computer Modelling and Simulation, 2013, pp. 728-733, doi: 10.1109/UKSim.2013.92.
• [12] N. B. Ghazali, F. C. Seman, K. Isa, K. N. Ramli, Z. Z. Abidin et al., "Twisted pair cable fault diagnosis via random forest machine learning," Computers, Materials & Continua, vol. 71, no.3, pp. 5427-5440, 2022.
• [13] C. K. Alam, F. Che Seman, A. Asrokin and N. Nohan, “Impact of cable bleeding into RLCG of twisted pair copper cable and achievable Bit rate,” in Proc. 7th Int. Conf. on Computer and Communication Engineering (ICCCE), Malaysia, pp. 1-6, 2018.
• [14] T. C. Chuah, Y. H. Ng, N. Hashim, A. N. Z. Abidin and A. Asrokin, “Virtual signal- integrity verification tool for copper twisted-pairs using TDR,” IET Science, Measurement & Technology, vol. 13, no. 2, pp. 231-237, 2019.
• [15] W. Cao, G. Ke, L. Zhang and F. Huang, “A novel testing method of twisted-pair primary parameter,” in 2nd Int. Conf. on Instrumentation, Measurement, Computer, Communication and Control, Harbin, China, pp. 104-107, 2012.
• [16] B. Cozza, "Low Frequency Model-Based Identification of Soft Impedance Faults in Cables," in IEEE Transactions on Instrumentation and Measurement, vol. 68, no. 10, pp. 3524-3535, Oct. 2019, doi: 10.1109/TIM.2018.2879691.
• [17] L. Abboud, A. Cozza and L. Pichon, "A matched-pulse approach for soft-fault detection in complex wire networks", IEEE Trans. Instrum. Meas., vol. 61, no. 6, pp. 1719-1732, Jun. 2012.
• [18] S. Schuet, D. Timuçin and K. Wheeler, "A model-based probabilistic inversion framework for characterizing wire fault detection using TDR", IEEE Trans. Instrum. Meas., vol. 60, no. 5, pp. 1654-1663, May 2011.
• [19] "International Standard 61156-1", "Multicore and symetrical pair/quad cables for digital communications part 1: Generic specification", Tech. Rep. IEC, 2002.
• [20] L. Jing, W. Wang, Z. Li and R. Murch, "Detecting impedance and shunt conductance faults in lossy transmission lines", IEEE Trans. Antennas Propag., vol. 66, no. 7, pp. 3678-3689, Jul. 2018.
• [21] Q. Zhang, M. Sorine and M. Admane, "Inverse scattering for soft fault diagnosis in electric transmission lines", IEEE Trans. Antennas Propag., vol. 59, no. 1, pp. 141-148, Jan. 2011.
• [22] D. Gdovin. "Vibrodiagnostics of the group pairers of the data cables in manufacturing operation". Thesis, Prešov, FMT TUKE, 2018.

Uwagi

PL

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).